Tubing & Hoses move water, air, fuel, and chemicals reliably across home, shop, and jobsite projects. This category covers flexible hose and rigid tubing for plumbing, HVAC, irrigation, marine, automotive, and lab uses, helping you route flow cleanly, control pressure, and simplify maintenance.

Choose materials built for your task: PEX for hot and cold water supply, PVC for clear routing and budget builds, rubber hose for abrasion resistance and bendability, silicone tubing for high temperature and food-grade service, and braided hose for extra burst strength. Look for NSF or FDA listings for potable water and food contact, UV-resistant jackets for outdoor runs, and chemical resistance charts for solvents and fuels.

Match size and performance to the system. Check inner diameter for target flow rate, wall thickness for burst pressure, and temperature rating for the environment. Verify minimum bend radius to prevent kinks. Pair tubing with the right connection type: barbed fittings with clamps, compression fittings, push-to-connect couplers, crimp rings for PEX, or quick-disconnects for service lines. Use PTFE tape or thread sealant where threaded adapters meet valves and manifolds.

Popular uses include sink and toilet supply lines, sump pump discharge, condensate and drain hose, air line for compressors, vacuum hose for dust collection, coolant lines, aquarium and brewing transfers, and fuel line in small engines. For clean cuts and easy installation, keep a tubing cutter, deburring tool, heat gun for PEX, and quality stainless clamps on hand. Secure runs with clips and saddles, and protect against chafe with grommets.

Inspect regularly for cracks, bulges, brittleness, or soft spots. Flush systems after cutting, and store coils out of sunlight. With the right tubing, hose, and fittings, you can build leak-resistant, code-friendly plumbing that performs and lasts. Find options by the foot or coil, in many diameters, colors, materials, and kits ready.