Lamp Parts

Lamp Parts connects you with the components needed to repair, upgrade, and customize table lamps, floor lamps, and ceiling pendants. Whether you are replacing a cracked socket or building a fixture from scratch, quality lighting parts boost safety, performance while saving money over full replacements.

Find replacement lamp parts such as E26/E27 medium-base, E12 candelabra, and three-way lamp sockets; rotary, pull-chain, and push-through switches; SPT-1 and SPT-2 cord sets with polarized plugs; inline dimmer switches; strain reliefs and cord grips; lamp harps and saddles; decorative finials; 1/8-IP and 1/4-IP threaded pipe, nipples, couplings, and hickeys; canopy and swag kits; felt pads, rubber grommets, and heat-resistant wire. Choose finishes that match your decor, including brass, antique brass, nickel, chrome, bronze, and matte black.

Benefits include safer operation, longer fixture life, and better light quality. Swapping worn sockets and brittle insulation reduces arcing and flicker. Upgrading to LED-compatible dimmers and triac or ELV controls delivers smooth, quiet dimming. Retrofitting with LED bulbs cuts energy use and heat, protecting shades and finishes.

How to choose the right parts:
- Match the bulb base and wattage to the socket’s rating and temperature spec (look for 105°C wire).
- Verify thread size (most US lamp parts use 1/8-IP, 3/8-27) and measure harp height from saddle to finial.
- For metal fixtures, use a three-conductor cord and bond the green ground to the shell or frame.
- Confirm dimmer-bulb compatibility; use dimmable LEDs and manufacturer pairing charts.
- Prefer UL/ETL listed lamp repair parts for code compliance and peace of mind.

Pro tip: diagnose issues with a non-contact tester and multimeter, tidy wiring with ferrules or wire nuts, and always add strain relief at the socket and base. With the right lamp repair supplies and lighting accessories, DIY lamp restoration is straightforward, looks great, and keeps favorite fixtures shining for years.