Erosion Control Wattles & Logs

Erosion Control Wattles & Logs help slow runoff, filter sediment, and stabilize disturbed soil on slopes, job sites, and waterways. These long, cylindrical barriers are placed on contour lines, around drains, or along perimeters to reduce water velocity, keep soil in place, and protect nearby infrastructure. They support stormwater BMPs, SWPPP plans, and NPDES compliance on construction, landscaping, and restoration projects.

Choose from straw wattles, coir logs, wood fiber wattles, or silt socks to match site conditions. Straw wattles are lightweight and economical for temporary sediment control on slopes and around curbs. Coir logs (coconut fiber) offer higher durability and are suited for shoreline, streambank, and habitat restoration. Wood fiber wattles balance cost and performance for general site control. Silt socks with compost or aggregate fill conform to hard surfaces and work well for curb inlets and paved areas. Common diameters include 6, 8, 9, and 12 inches, with lengths from 10 to 50 feet to fit small landscapes or large infrastructure sites.

Proper installation drives performance. Set wattles in a shallow trench 2–3 inches deep, stake every 3–4 feet, and at both ends. Overlap adjoining sections 6–12 inches and tightly fit ends to reduce bypass flow. On slopes, space wattles based on grade; steeper slopes need closer spacing. For check dams in channels, key logs into banks and stagger heights to avoid scouring. Inspect after storms, remove accumulated sediment, re-seat any gaps, and replace damaged sections.

Helpful accessories include hardwood stakes, biodegradable pins, connectors, and erosion control blankets for added slope protection. Use wattles and logs for perimeter control, slope interruption, inlet protection, temporary check dams, trail building, and site restoration. They are quick to install, cost-effective, and many options are biodegradable, supporting low-impact, sustainable erosion and sediment control. Order by diameter, length, and fill type to match your project.