Polyethylene Pipe, Fittings & Accessories

Polyethylene pipe (PE), including HDPE and MDPE, delivers lightweight, corrosion‑resistant performance for potable water, irrigation, gas distribution, and drainage. Its flexibility supports long coil runs that reduce joints, handles freeze‑thaw cycles without cracking, and offers a smooth bore for high flow and low friction losses. This directory section gathers pipe, fittings, and accessories to build reliable PE systems: compression fittings for quick assembly, electrofusion and butt‑fusion components for permanent, leak‑tight joints, and barbed/insert fittings for low‑pressure service. You’ll find couplings, elbows, tees, adapters, transition fittings to copper, PVC, steel, valves, end caps, saddles, repair clamps, and manifolds—sized in IPS or CTS. Metric sizes offered where available.

Installation is fast with the right tools: PE pipe cutters for square cuts, chamfer and deburring tools, alignment clamps, squeeze‑off tools, electrofusion scrapers and control units, butt fusion machines, pressure test pumps, tracer wire, marking pens, and insulation. Choose pipe by SDR (e.g., SDR 11, SDR 17) to match pressure/PSI requirements, then match fittings to the system type. Look for certifications like NSF/ANSI 61 for drinking water, ASTM D3035 and AWWA C901/C906 for water service, and ISO 4437/EN 1555 for gas MDPE. UV‑stabilized options suit above‑ground exposure, and PE’s toughness supports trenchless pulls and directional drilling.

• Size correctly: confirm IPS vs CTS and use pipe stiffeners with compression/insert fittings as required.
• Prep matters: square cut, clean, scrape for electrofusion, mark insertion depth, and align before fusion.
• Test and protect: pressure test before backfill, add tracer wire and warning tape, and use proper bedding and clamps.
• Plan for movement: allow for thermal expansion/contraction and avoid point loads.

Browse polyethylene pipe, HDPE pipe coils, MDPE gas pipe, compression fittings, electrofusion couplers, butt fusion equipment, tapping saddles, repair clamps, ball valves, and PE pipe tools to build durable, leak‑free systems with low maintenance and long service life.