Garden hose repair fittings let you fix leaks, crushed ends, and split sections fast—saving money, reducing waste, and keeping your watering schedule on track. Instead of replacing a full hose, swap in a new end, join two pieces, or add a quick-connect to keep sprinklers, nozzles, and pressure washers running smoothly.

Common types include:
- Hose menders to join cut or split sections
- Male and female hose ends to replace damaged connectors
- Couplers and unions for temporary or permanent joins
- Quick-connect sets for easy tool changes
- Washers and O-rings to stop slow drips

Choose materials that match your use: brass and stainless steel for durability and corrosion resistance, anodized aluminum for lighter weight, and high-impact polymers for budget-friendly repairs. Look for lead-free, drinking-water-safe options for RVs, boats, and potable uses.

Sizing matters. Most garden hoses are 5/8-inch or 3/4-inch inner diameter, with 3/4-11.5 NH (GHT) thread on the connectors in North America. Verify hose size, thread type, and pressure rating; quality fittings handle typical household water pressures (40–90 PSI) and outdoor conditions like UV, grit, and temperature swings.

Simple repair steps:
- Measure the hose ID and pick the right fitting
- Cut the damaged section square with a sharp knife
- Slide on the clamp if using a barbed fitting
- Insert the barb fully or seat the compression sleeve
- Tighten evenly—snug, not stripped
- Replace worn washers, test under pressure, and retighten if needed

Features to consider include kink guards, strain relief springs, heavy-duty clamps, and high-flow designs that reduce restriction. Compatibility with rubber, vinyl, and hybrid hoses ensures a secure seal. For cold climates, metal ends resist cracking; for frequent tool swaps, quick-connects save time.

From simple hose end replacements to complete garden hose repair kits, the right fittings restore performance, cut down on leaks, and extend hose life across lawn care, car washing, and irrigation tasks.