Qc 8 Inch Lamp Harp Holder Kit with Finial and Detachable Light Duty Saddle Base, Set of 2 DIY Lighting Accessories Horn Frame Lampshade Bracket for Table and Floor Lamp

Why I reached for this harp kit

A mismatched pair of lamps in my office had been nagging at me: one shade sat too low and brushed the bulb, the other wobbled because of a bent harp. I wanted a quick, clean fix that didn’t require a full socket swap unless absolutely necessary. That’s what led me to the Qc 8-inch harp kit—a simple, two-pack set with harps, detachable saddles, and pineapple finials in an antique brass finish.

Over several installs on table and floor lamps around the house, this kit has proven to be more than just a replacement part. It’s a tidy way to standardize lamps, correct shade height, and restore stability with minimal fuss.

What you get and what it fits

Each kit includes:
- Two 8-inch U-shaped harps
- Two detachable light-duty saddles
- Two decorative pineapple finials
- A basic instruction sheet

The 8-inch dimension is measured from the top shoulder to the bottom of the prong—the part that sits into the saddle. That’s a standard size for a lot of mid-height table lamps, and it paired well with common spider-fitter shades. If your shade uses an UNO fitter (sits directly on the socket) or a clip-on fitter, harps aren’t the right hardware. For spider-fitter shades, this is exactly what you need between the socket and the finial.

Build quality and finish

The harps themselves are sturdy, with clean welds and smooth edges. The end caps snap securely into the saddle and don’t rattle. I appreciate the polished, plated metal: it has a smooth, burr-free surface that feels durable and has resisted fingerprints and light scuffs in everyday use. The finish is labeled antique brass, though to my eye it skews toward a brighter, warmer brass rather than a deeper, aged tone. On black or dark bronze lamp bodies, that contrast can look intentional and sharp; on genuine, darker antique brass hardware, the color mismatch may stand out.

The included “light-duty” saddles are functional and consistent. They held spider-fitter shades firmly without flexing. I wouldn’t use them under an oversized, heavy glass shade, but for fabric, paper, or standard-weight drum, empire, and bell shades, I had no problems.

The pineapple finials are a fun detail. They thread on smoothly and seat firmly. Stylistically, they read classic/traditional; if your lamp is modern or minimal, you may prefer a more understated finial, but it’s easy to swap to your own.

Installation: quick if you’re reusing the saddle

Replacing just the harp:
1. Unplug the lamp.
2. Unscrew the finial and remove the shade.
3. Squeeze the old harp to release it from the saddle; lift it out.
4. Seat the new harp’s caps into the existing saddle and release.
5. Replace the shade and finial.

This takes all of two minutes per lamp. In most cases, I kept the existing saddle and simply dropped in the new harp.

Replacing the saddle (if the original is bent or missing):
1. Unplug the lamp.
2. Remove shade and harp.
3. Gently lift the socket shell: most pull straight up; some have a small set screw.
4. Loosen the socket base enough to slide off the old saddle.
5. Fit the new saddle, reassemble the socket, and press the shell back into place.
6. Install the harp, shade, and finial.

Plan on 10–15 minutes for your first saddle swap. It’s straightforward, but take your time around the socket parts. The instruction sheet covers the basics, and you should never work on a lamp that’s plugged in.

Everything in my installs lined up: the harp caps sat true in the saddle, there was no play, and the finials tightened down without cross-threading. Once assembled, the shades stayed centered and didn’t twist when nudged.

Sizing and clearance tips

An 8-inch harp is a good starting point for most medium table lamps, but the “right” height depends on your shade and bulb combination. Here’s how I approach it:

• Check the drop of the shade’s spider (how far the fitter sits below the top of the shade). Deeper drops raise the top edge of the shade relative to the harp.
• Aim for the bottom of the shade to cover the lamp’s hardware and the top of the shade to sit high enough to clear the bulb without hot spots or glare.
• If your bulb is larger than an A19 (for example, some smart bulbs or A21 bulbs), you may want more clearance than 8 inches provides. In that case, a 9-inch harp often makes bulb changes easier without exposing hardware; 11 inches can push typical shades too high on standard bases.

On my lamps, the 8-inch harps put the lower shade edge right above the socket and fully concealed the bulb at normal seated height—exactly what I wanted.

In use: stability and safety

Once installed, these harps simply do their job. They hold the shade where it belongs, keep the spider centered, and add a layer of protection around the bulb. The U-shape has enough spring to compress easily during installation, yet it feels firm in day-to-day handling. No squeaks, no wobble, and no sag under normal shade loads.

Because the caps seat securely in the saddle, the shade assembly doesn’t drift when the lamp is turned on or off. The extra bit of bulb protection is practical if you have kids or pets wandering close to end tables—there’s a helpful physical barrier before a hand or toy meets a hot bulb.

Aesthetic considerations

The antique brass finish is glossy and leans bright. On a vintage lamp with true aged brass, it reads more “polished” than “patinated.” If your aim is a perfect color match, you might notice the difference. That said, on painted lamp bodies (black, navy, off-white), the contrast feels intentional and nicely finished. The pineapple finials are well-made and add a small flourish; they fit traditional and transitional spaces, less so ultra-modern. If the pineapples aren’t your style, keep them in your parts bin and use a different 1/4-27 finial—you’ll still get the benefit of the reliable harp and saddle.

Durability

After repeated installs and removals while testing shades, the plating held up fine—no flaking, and no rough edges developed around the sockets. The harps retained tension, and the caps didn’t loosen. Given the coated metal build, oxidation shouldn’t be a concern under normal indoor conditions.

Limitations and gotchas

• Color tone: If you’re matching true antique brass, expect a brighter, more “gold” look here.
• Shade type: Works only with spider-fitter shades; not for UNO or clip-on styles.
• Heavy shades: The included saddle is labeled light duty. It handled standard fabric shades well, but I wouldn’t pair it with an unusually heavy glass or stone shade.
• Socket work: If you replace the saddle, you’ll need to open the socket. It’s easy, but not everyone is comfortable doing that.

Value and who it’s for

As a two-pack, this kit is practical for refreshing a pair of lamps or for anyone who keeps a small stash of parts for DIY repairs. The combination of harps, saddles, and finials means you can solve most harp-related issues without chasing extra components. For lamp builders and frequent tinkerers, it’s a tidy, dependable set to have on hand.

Practical advice before you buy

• Measure your current harp height from the top shoulder to the bottom prong, or estimate based on your shade’s drop and desired coverage.
• Check your shade fitter type. If it’s spider-fitter, you’re good. If not, look for the right fitter hardware instead of a harp.
• Consider bulb size. If you use large or smart bulbs, you might prefer a 9-inch harp to ease bulb changes and reduce glare.
• Decide whether you’ll reuse your existing saddle. If your current saddle is straight and snug, reuse it for a faster install.

Recommendation

I recommend the Qc 8-inch harp kit. It’s well-made, easy to install, and thoughtfully packaged with everything needed to stabilize and position a shade correctly. The harps are sturdy, the saddles seat true, and the finials thread smoothly. The finish skews bright for an “antique brass,” and the saddles are best suited to standard-weight shades, but those are small trade-offs given the overall quality and convenience. If your goal is to set a spider-fitter shade at the right height and restore a clean, safe profile to a table or floor lamp, this kit does exactly that—reliably and without drama.