Features
- Impact energy: 10.5 J for fast chipping of hard concrete
- Vibration control designed to reduce vibration felt at the handles compared with rotary hammers without active vibration control
- Midweight construction suited for horizontal chipping in upper and lower wall areas and bushing applications
- OSHA Table 1 compliant when used with a compatible dust extractor
- 7-position variable speed control for precision chipping
- Built-in constant-speed electronics to help maintain consistent speed under load
- Compatible with dust extractors that support remote activation via wireless tool control
Specifications
| Voltage | 60 V |
| Impact Energy | 10.5 J |
| Blows Per Minute (Bpm) | 2900 |
| Amps | 9 A |
| Battery Type | Lithium‑ion |
| Battery Amp Hours | 9 Ah |
| Is Battery Included | Yes |
| Power Source | Battery |
| Motor Type | Brushless |
| Chuck Type/Size | SDS‑Max (3/4 in.) |
| Max Rpm | 2900 |
| Number Of Pieces (Kit) | 3 |
| Has Wireless Tool Control (Wtc) | Yes |
| Product Weight | 27.7 lb |
| Product Height | 13.46 in |
| Product Length | 23.11 in |
| Product Width | 4.92 in |
| Color | Yellow/Black |
| Included Items | Chipping hammer, battery, charger, kit box, D‑handle, manual |
| Warranty | 3 Year Limited Warranty; 1 Year Free Service; 90 Day Satisfaction Guarantee |
Related Tools
Cordless SDS Max chipping hammer intended for demolition and concrete surface preparation. The tool delivers up to 10.5 J of impact energy and is configured for high-output horizontal chipping in wall and bushing applications. Built to be maneuverable for mid‑weight use and to maintain speed under load. This kit includes a 20V/60V battery, charger, D‑handle, kit box and an operator manual.
Project Ideas
Business
Dust‑Controlled Tile & Thinset Removal
Offer rapid bathroom/kitchen demo: pop tile and remove thinset from concrete substrates. Pair the hammer with a Table 1‑compliant dust extractor (use wireless tool control for remote auto‑start) to work cleanly in occupied homes and condos.
Concrete Surface Prep for Coatings
Provide CSP profiling before epoxy, polyaspartic, or overlay installs by bush‑hammering or chipping high spots, laitance, and spalls. The 10.5 J impact energy and 2,900 BPM maintain productivity on stubborn areas while minimizing rental of larger scarifiers for small to mid‑size jobs.
Decorative Anti‑Slip Finishes
Sell bush‑hammered textures on pool decks, steps, and ramps to improve traction and refresh appearance. Offer pattern samples and tiered pricing by square footage; cordless mobility reduces setup time around pools and tight courtyards.
Mobile Post, Pad, and Trench Work
Specialize in breaking small pads, mailbox/post footings, and trenching channels for drain lines or conduit in existing slabs. The midweight form factor is efficient for horizontal and edge work where breakers are overkill, boosting turnaround and margins.
Masonry Salvage & Resale
Recover and clean bricks, pavers, and capstones from remodels, then resell or reinstall. Fast mortar removal with vibration control preserves more inventory; market reclaimed materials to designers and DIYers for boutique margins.
Creative
Bas‑Relief Concrete Mural
Lay out a design on an exterior garden or garage wall and chip away the background to raise your motif. Use the 7-position speed control for detail areas and the bushing head for texture. The vibration control and constant-speed electronics help keep lines clean while the cordless design lets you move freely along the wall.
Exposed‑Aggregate Patio Refresh
Reveal the natural stone in an aging slab by lightly chipping the surface to create an exposed-aggregate finish with improved traction. Work in passes, dialing down speed for edges and steps. Finish with a penetrating sealer for contrast and durability.
Carved Concrete Planters and Benches
Shape precast blocks or thick pavers into modern planters and small garden benches. Use flat and point chisels to define edges, then a bush hammer to add a hand‑hewn texture. The midweight build is ideal for horizontal work on sawhorses.
Textured Accent Wall Panels
Create modular, thin concrete panels with geometric bush‑hammered patterns for an interior or patio feature wall. The tool’s constant speed under load keeps textures uniform, while variable speed helps fade or deepen patterns for depth.
Salvaged Brick Feature Wall
Carefully chip old mortar from reclaimed bricks to build a rustic accent wall or fireplace surround. The SDS‑Max power speeds up cleaning without over‑breaking edges when you keep the speed low and the tool angled shallow.