Features
- Self-sharpening tip to maintain edge as the bit wears
- Optimized tip geometry for sustained cutting performance
- Designed for concrete and masonry demolition and chipping
- 1-1/8 in hex shank for use in compatible breaker/demolition hammers
- Packaged as a single chisel bit
Specifications
| Material | Steel |
| Head Type | Bull Point |
| Shank Type | Hex |
| Number Of Pieces | 1 |
| Overall Length (In) | 15-3/4 |
| Shank Hex Size (In) | 1-1/8 |
| Working Length (Mm) | 39.375 |
| Product Diameter (In) | 7/8 |
| Product Pack Quantity | 1 |
Related Tools
Bull-point chisel intended for breaking, chipping and removing concrete and masonry. It has a self-sharpening tip and a hex shank for use in compatible breaker/demolition hammer tools. Overall length is 15-3/4 inches.
Project Ideas
Business
Controlled Micro-Demolition Service
Offer precise chipping and breakup of concrete/masonry where full-size demo isn’t feasible: steps, curbs, thresholds, fence-post footings, and interior pads. Market to homeowners and remodelers needing low-vibration, targeted removal with dust control. Bill per hour plus haul-away or per-piece removal.
Slab Chasing & Utility Trenching
Provide narrow chases in concrete for electrical, low-voltage, or plumbing runs, using the bull-point to start and outline cuts before cleanup with a grinder/saw. Ideal for retrofits in garages, shops, and ADUs. Package pricing: per linear foot including patch-back and rough finish.
Urbanite Recycling & Paver Supply
Convert demo slabs into sellable ‘urbanite’ pavers on-site. Break, shape, and sort into consistent thicknesses, then sell as eco-friendly stepping stones, retaining wall blocks, or edging. Upsell delivery and installation to landscapers and DIY clients; market the sustainability angle.
On-Site Stone/Concrete Fitting for Hardscapers
Mobile service to custom-fit flagstone, cobbles, and precast pieces where saw access is limited. Use the bull-point to knock off high spots, taper edges, and key stones for tight joints. Charge a day rate to landscape crews for faster installs and fewer returns to the saw.
Anchor Socketing in Rock & Concrete
Specialize in creating starter sockets in bedrock or cured concrete for posts, bollards, and structural anchors. The bull-point initiates holes and reliefs before drilling and epoxy setting. Target deck builders, fence contractors, and sign installers; price per anchor point with volume discounts.
Creative
Urbanite Mosaic Path & Bench
Break up a tired patio or sidewalk into irregular ‘urbanite’ slabs, then shape edges with the bull-point to create natural-looking contours. Lay the pieces into a compacted base for a winding garden path and stack select chunks to form a rustic garden bench. Finish by grouting gaps with decomposed granite or mortar and sealing for durability.
Carved Block Planter & Lantern
Cast a solid concrete block (or repurpose a chunk of slab) and rough-carve a cavity using the chisel to create a sculptural planter. Add perforations or channels through the sides for drainage and optional tea-light glow. Soften tool marks with a cup wheel or leave the faceted texture for a brutalist aesthetic.
Stone-Fit Fire Ring
Use the bull-point to chip and key fieldstones or concrete chunks so they interlock tightly into a circular fire pit. The point lets you nibble high spots and create seating faces that mate. Cap with flat stones and brush a refractory mortar into interior seams for a clean, durable finish.
Relief Texture Wall Art
On a masonry wall or thick render, chip shallow relief patterns—geometric lines, botanical motifs, or a topo-map effect. The point lets you ‘draw’ by pitting and grooving the surface, then you can stain or limewash for contrast. Works great on garden walls or as an accent panel.
Water Rill & Basin Feature
Carve a shallow channel and small catch basin into a concrete or stone slab to make a recirculating water rill. The bull-point creates the initial trough and texture; refine with a grinder for flow. Add a small pump, pebbles, and LED lighting for a compact, modern water feature.