Features
- Recessed corners distribute torque across flats to reduce wear
- Thinner profile for access in tight or confined spaces
- Large laser‑etched size markings for easy identification
- 6‑point geometry for engagement with fastener flats
- Rated for use with corded and cordless impact drivers and impact wrenches
Specifications
| Socket Size | 3/4" |
| Drive Size | 1/2" |
| Socket Type | Deep (6‑point) |
| Overall Length | 3 in |
| Number Of Pieces | 1 |
| Intended Use | Impact drivers and impact wrenches |
Related Tools
Related Articles
Deep 6‑point impact socket sized for 3/4" fasteners with a 1/2" drive. Recessed corners distribute torque across the flats to reduce wear. The socket has a thinner profile for access in constrained spaces and large laser‑etched markings for easier identification. It is intended for use with corded and cordless impact drivers and wrenches.
Project Ideas
Business
Mobile pergola/deck hardware service
Offer on-site installation and retorque of structural lag bolts and hex-head fasteners for pergolas, decks, and sheds. The deep, thin-profile socket speeds work in confined joist bays and produces clean, professional results without fastener damage.
Trailer and equipment torque audits
Provide recurring fastener inspection and torque checks for small fleets (landscapers, contractors, rental yards). The impact-rated deep socket handles common 3/4" hex hardware on hitches, spring packs, and frames, reducing downtime and liability.
Bolt-on rack and utility kits
Design bolt-together roof/bed racks, utility carts, and shop fixtures standardized to a single 3/4" hex size for easy customer assembly. Sell kits online and include the deep socket in the box as a branded tool for a premium, hassle-free experience.
Facility fastener standardization
Consult for warehouses and small manufacturers to replace mixed hardware with standardized 3/4" hex fasteners. Bundle labeled hardware assortments, torque charts, and an impact-ready deep socket to streamline maintenance and reduce stripped fasteners.
Hands-on torque and fastener workshops
Host weekend classes teaching fastener selection, prep, and correct torquing techniques for DIYers and apprentices. Provide each attendee with a 3/4" deep impact socket, and monetize through ticket sales, sponsorships, and tool/consumable bundles.
Creative
Hidden-rod slab table
Build a live-edge slab table joined with threaded rod and recessed 3/4" hex nuts inside counterbores. The deep, thin-profile 3/4" socket reaches past the wood to torque the nuts without marring the slab, and the 6‑point geometry protects the hardware during final snugging.
Bolt-laminated workbench
Laminate 2x lumber into a butcher-block workbench top using long threaded rods and 3/4" nuts. Use the deep impact socket to drive over protruding rod ends and pull the lamination tight evenly, then retorque after glue cure for a rock-solid surface.
Modular steel-and-wood storage
Fabricate a modular shop shelving system from angle iron and wood panels, assembled with 1/2"-13 bolts (3/4" hex). The thin-wall deep socket fits inside tight corners and channel, making assembly fast with an impact wrench while preventing rounded fasteners.
Overland truck bed rack
Build a bolt-together bed rack from square tube with internal sleeve joints and recessed hardware. The 3" deep socket reaches nuts set inside the tubing and the 6‑point grip lets you hit proper torque without chewing the hardware, even with a cordless impact.
DIY bushing/bearing press kit
Assemble a shop press kit using threaded rod, heavy washers, and the 3/4" deep socket as a receiving cup for small bushings. The deep cavity captures the part as it’s pulled through, and the impact-rated socket lets you drive stubborn pieces with confidence.