selizo 480 Sets 4 Colors 3 Sizes Leather Rivets Double Cap Rivet Tubular Metal Studs with 3 Pieces Setting Tool Kit for Leather Craft Repairs Decoration

What this kit is and who it’s for

The Selizo rivet kit is a simple, affordable way to add double-cap rivets to light and medium-duty leather and canvas projects. It packs four plated finishes (gold, silver, antique brass, and dark brass) in three shank lengths, plus the basic three-piece setting tools. If you’re just getting started with leatherwork or you occasionally need to reinforce a belt hole, attach a strap, or add decorative hardware to hats, bags, or denim, this kit hits a very practical sweet spot: plenty of choice, a compact organizer, and results that look clean when you take a little care with the setup.

What you get

• 480 double-cap tubular rivets (three sizes, four finishes)
• 3-piece setting tool set (anvil, setter, and a basic punch)
• Compartmentalized plastic organizer

The caps have a smooth, even plating that reads well next to both veg-tan and chrome-tan leather. The organizer is better than “generic kit” quality: the latch closes confidently and the compartments keep most sizes separated. I’d still slip a thin foam sheet over the parts if you’re going to toss it in a tool bag; tiny hardware has a way of migrating.

Build quality and materials

The rivets themselves are copper with plated finishes. In hand, the finishes are consistent and resisted light scuffs from the setter cup during normal use. I tapped a couple caps on a steel block to simulate careless strikes and didn’t see chipping—just minor marring you would expect when you miss-hit with a steel hammer. In short: the plating is as durable as most hobbyist-grade rivets, and better than the truly bargain-bin hardware I’ve used.

On the flip side, the included hole punch is the weak link. It works, but it’s made from fairly soft steel. If you’re heavy-handed with a metal hammer, expect the tip to mushroom or bend. The setter and anvil are serviceable: the cup is centered and mates with the cap profile well enough to finish domed heads without flattening them, provided you use moderate strikes and a solid backing surface.

Setup and technique

My best results came from a simple, repeatable process:

1. Measure your stack. Aim for a shank length that protrudes 1–2 mm past the back of the material. The small size suits thin leather (one or two layers of 2–3 oz), the medium handles two layers of 3–4 oz, and the large is for thicker assemblies like a 6–7 oz strap joined to a 4–5 oz gusset.
2. Punch a clean hole. A crisp hole prevents the shank from folding over or skewing. On thicker veg-tan, I switched to a dedicated hollow punch or rotary punch to keep edges sharp.
3. Use a hard, dead-flat surface. Granite, marble, or a proper anvil helps the cap seat squarely. A soft workbench top introduces bounce and misalignment.
4. Moderate, controlled strikes. Two to four firm taps with a rawhide or nylon mallet beat a dozen anxious hits with a steel hammer. Over-striking is the fastest route to a lopsided set.
5. Check alignment between hits. A quick glance to confirm the setter cup is centered on the cap saves you from rolling the shank or marking the finish.

Using that workflow, I installed roughly 60 rivets across belts, a tote handle, and a canvas tool roll. I binned three pieces due to noticeable shank eccentricity or a cap that wouldn’t mate squarely. That’s acceptable for a budget-friendly assortment, but it’s a reminder to keep a few extras on hand for any given project.

Performance in real projects

• Belt keeper and strap reinforcement: Medium and large sizes held securely on two-layer strap ends (total stack around 8 oz veg-tan). No visible cap flattening, and the burr formed cleanly. After a week of wear, nothing loosened.
• Canvas tool roll: Small rivets worked nicely as decorative and light-duty fasteners through waxed canvas. Minimal show-through around the holes.
• Tote handle attachment: I used large posts through 5–6 oz leather into a doubled 4 oz handle. After loading the bag with note-weight paper reams for a simple stress test, the hardware stayed tight. This isn’t a substitute for stitching on high-stress points, but it’s a good supplement.

Where the kit stumbled was with the tiniest rivets on thicker stacks. When the post is only barely proud of the backer, there’s not enough material to roll into a proper burr, and the shank can tip—especially if the hole was punched raggedly or at a slight angle. In those cases, stepping up one size or thinning the hole edge with a countersink improves your odds.

Finishes and corrosion resistance

I left a handful of mixed finishes near a window for a week (variable humidity, a bit of morning sun) and saw no tarnish or discoloration. A gentle wipe returned their original sheen. The antique brass and dark brass look particularly forgiving on casual wear—fingerprints aren’t as obvious as they are on polished silver.

The included tools vs. upgrading

The bundled tools get you going, but a few small upgrades pay off quickly:

• Swap the hole punch for a dedicated rotary punch or a set of hollow punches. You’ll get cleaner holes, less effort, and fewer bent shanks.
• Use a rawhide or nylon mallet instead of a steel hammer. It’s quieter, kinder to the tools, and reduces glancing blows that mark caps.
• Back your work with granite or a steel anvil. A cutting mat or wood bench will absorb energy and encourage misalignment.
• Add a strip of painter’s tape to the setter cup when working with polished finishes to minimize scuffing; replace as needed.

With those changes, my set rate jumped and the finish quality improved noticeably.

Strength and limitations

Double-cap rivets are primarily for light to medium-duty fastening with a clean, finished look on both sides. They’re great for:

• Securing strap ends and belt keepers
• Decorative accents on hats, jackets, and bags
• Reinforcing stitch lines that see moderate stress

They are not the right choice for heavy, load-bearing joints such as horse tack, tool belts, or motorcycle bags without additional stitching or heavier hardware. If you routinely build projects in that category, consider solid copper rivets and burrs or Chicago screws with threadlocker. Also note that the shortest rivets in this kit are truly small—best reserved for thin materials and decorative work.

Reliability and consistency

Most of the rivets in my batches were well-formed and concentric. I did encounter occasional off-center posts or slightly uneven caps—typical of budget-friendly assortments. It’s not a showstopper, but if you’re doing production runs where every second matters, that culling step is real. For hobby and small-batch work, the yield is fine, especially given the overall quantity.

Value

For the price, you’re getting a wide color palette, three practical sizes, and enough stock to experiment without rationing hardware. The organizer reduces clutter and makes it easy to grab a matching finish mid-project. You’ll likely outgrow the hole punch, but the rest of the kit holds its own for a beginner to intermediate workflow.

Bottom line

The Selizo rivet kit delivers what most DIY leather and craft projects need: clean-looking double-cap rivets in useful sizes and finishes, packaged in a way that keeps your bench tidy. The hardware is solid for the category, the finishes look good after setting, and the assortment encourages experimentation. You’ll want to upgrade the punch, work on a firm surface, and select the right shank length for your material stack—do those things and the results are reliably neat and secure.

Recommendation: I recommend this kit for beginners and hobbyists who want an affordable, versatile assortment for light and medium-duty projects. It offers strong value, serviceable tools to get started, and finishes that hold up well in typical use. If you need bulletproof, load-bearing hardware or production-grade consistency, pair this kit with better punches and consider stepping up to heavier rivets—but as an everyday craft kit, it punches above its price.