Features
- Corded or cordless operation (extension cord sold separately)
- Multiple mounting options: freestanding, hang hooks, tripod mount (sold separately), and wall mounting
- IP54 water and dust resistant
- Variable speed control
- Includes battery and charger in kit
- Three-blade impeller
Specifications
Jobsite Equipment Type | Jobsite fan |
Overall Size | 11 in (housing) |
Blade Diameter | 7 in (impeller) |
Blade Count | 3 blades |
Operation | Corded or cordless (battery and charger included in kit) |
Battery Type | 20V MAX* lithium-ion (DCB201 1.5Ah included) |
Charger Included | Yes (DCB107) |
Airflow Control | Variable speed (up to ~500 CFM stated) |
Ingress Protection | IP54 (water and dust resistant) |
Applications | Cools work areas, dries paint or wet surfaces, circulates airflow |
Warranty | 3 Year Limited Warranty; 1 Year Free Service; 90 Days Satisfaction Guaranteed |
Return Policy | 90-Day returnable |
Related Tools
Related Articles
Compact jobsite fan that can run on AC power or a 20V battery. It provides adjustable airflow, multiple mounting options for placement or hanging, and has ingress protection for resistance to dust and water. The kit includes a battery and charger for immediate use.
DeWalt 11 in Corded/Cordless Jobsite Fan Kit Review
I’ve used a lot of “personal cooling” solutions on jobsites, in garages, and in stuffy crawlspaces. This compact DeWalt jobsite fan strikes a really practical balance between size, output, and flexibility. It isn’t a carpet dryer and it won’t pressurize a room, but for keeping a crew comfortable, speeding up dry times on small areas, or moving stagnant air around a workspace, it delivers more than its footprint suggests.
Design and build
The fan’s housing is about 11 inches across, with a 7-inch three-blade impeller tucked behind a tight front grille. It’s compact enough to tuck onto a shelf or the step of a ladder, and it feels solid without being a brick to carry. The frame and protective grills have the right mix of rigidity and impact resistance for jobsite use, and the pivoting head has enough detent strength to hold its angle without drooping over time.
The IP54 rating matters here. I’ve used it around sawdust, overspray, and the kind of damp mornings that leave everything slightly wet, and it’s shrugged all of that off. It’s not a submersible, and I wouldn’t leave it out in a downpour, but for the realities of a jobsite or garage, it’s confidence-inspiring.
Controls are as simple as they should be: a single variable-speed knob that moves smoothly and lets you dial airflow rather than jump across just a couple of steps. There’s no oscillation feature, and I don’t miss it—point the head, set the speed, and it stays put.
Mounting and placement
This is where the fan earns its keep. It can sit freestanding on the ground or a shelf, and the footprint is stable enough that hose snags and incidental bumps haven’t toppled it in my use. Integrated hanging hooks are legitimately useful; I’ve hung it from racking, conduit, and the side of a service cart. Wall-mount keyholes are built in if you want a semi-permanent spot. There’s also a tripod mount option (sold separately), which opens up a lot of creative placement when you’re trying to move air at a specific height or across a work area.
One note: the hooks don’t rotate endlessly, so in some odd placements you’ll need to get a little creative. That said, between the hooks, the wall mount, and freestanding stability, I rarely had to compromise on placement.
Power options and runtime
Dual power is the big advantage here. You can run it on any DeWalt 20V MAX battery (including FLEXVOLT packs in 20V mode), or you can plug in an extension cord and run all day on AC. Not having to babysit batteries during a long paint and drywall day is a huge convenience, and being able to go cordless for crawlspaces or outdoors is equally helpful.
The kit includes a 1.5Ah 20V MAX pack and a charger, so you can use it out of the box. The included battery keeps the size and weight down, but it’s the bare minimum for runtime. Realistically, you’ll want a 4.0Ah or 5.0Ah pack if you expect extended cordless sessions.
In my use, rough runtimes looked like this:
- 1.5Ah pack: about 40–60 minutes at high, 1.5–2.5 hours at mid, longer on low
- 5.0Ah pack: around 3–5 hours at high, a half-day at mid
- FLEXVOLT 9.0Ah (in 20V mode): multiple hours at high, essentially a full day at lower speeds
On AC power, it has a modest draw, so sharing a 15A circuit with other tools hasn’t been an issue for me. Just note that an extension cord isn’t included.
Airflow and performance
DeWalt rates the fan around the 500 CFM mark, and in real use that lines up with what I feel. At close range (within 6–10 feet), it provides convincing personal cooling. Back it off to 10–15 feet, and it’s still noticeable—good for keeping air moving across a small work zone. If I need to push air through a whole two-car garage, I’ll step up to a larger fan, but for targeted airflow this compact unit performs above its size.
The variable speed control is the difference-maker. On its lowest third, it’s genuinely quiet—office fan quiet—and perfect for pointing at a workstation without creating a paper tornado. Dial it up and it transitions smoothly to a strong, focused stream. Noise at high isn’t whisper-level, but it’s not the harsh, rattly kind of loud either; the tone is low and tolerable even for long stretches. The motor and blade balance are good—no noticeable buzzing or excessive vibration.
Practical tasks where it’s excelled for me:
- Drying small paint touch-ups and trim without dusting the surface
- Moving air across a damp floor after a quick cleanup
- Clearing fumes after using solvents in a corner of a shop
- Keeping air moving inside a delivery vehicle or service van during slow periods
- Bringing relief to a crew on a muggy day without dragging cords around
It’s not a replacement for a purpose-built air mover on a remediation job, and it won’t ventilate a whole house. But in the “always have it nearby” category, it punches above its weight.
Usability details
- The carry handle is well placed and the balance is good with or without a battery installed.
- The cord inlet is positioned so you can stand the fan upright without the plug interfering.
- Cleaning is straightforward; a soft brush or compressed air clears the grille and blades.
- The head tilt range is generous enough to point down from a shelf or up from the floor, which makes the mounting options more versatile.
There are a few misses worth noting:
- No oscillation, which some folks prefer for general room circulation. I’d rather have the durability and simplicity, but it’s a trade-off.
- The included 1.5Ah battery limits cordless runtime. It’s fine in a pinch but doesn’t match the fan’s capabilities—budget for a higher-capacity pack if you plan to stay cordless.
- The tripod mount hardware is an extra, and a small, integrated cord wrap would be handy for storage.
Durability and service
IP54 protection has proven meaningful: sawdust, light rain mist, and jobsite grit haven’t bothered it. I haven’t had to baby it—tossed in a van, pulled on and off shelves—and the housing and pivot mechanism still feel tight. DeWalt’s 3-year limited warranty, 1-year free service, and 90-day satisfaction guarantee provide a good safety net, which matters for a tool you may use hard and often.
Compared to other compact jobsite fans
Most compact cordless fans in this size class give you either strong mounting options or dual power; getting both is less common. The DeWalt’s combination of AC/cordless operation, genuine IP rating, and multiple mounting choices makes it especially adaptable. Some competitors offer similar airflow, and a few include oscillation, but many are battery-only or lack the weather resistance. If you’re already on DeWalt’s 20V platform, the ecosystem bonus is obvious; if you’re not, the AC option still makes it a smart pick for mixed-tool environments.
Bottom line
This DeWalt jobsite fan feels like a tool, not a gadget. It’s compact, durable, flexible about where and how it can run, and it moves a meaningful amount of air without making a scene. The biggest caveat is the included battery capacity—great for getting started, but not sufficient for long cordless stints. Add a 4.0Ah or larger pack and the fan’s usefulness expands dramatically. I also wouldn’t mind an oscillation mode or an included tripod adapter, but those are nice-to-haves, not deal-breakers.
Recommendation: I recommend this fan. If you’re in DeWalt’s 20V lineup, it’s an easy choice for its dual power, IP54 durability, and mounting versatility. Even if you’re not, the ability to run on an extension cord, plus truly usable airflow in a small frame, makes it a smart, reliable addition to a jobsite, garage, or service vehicle.
Project Ideas
Business
Micro Restoration & Drying Service
Offer rapid spot-drying for small water intrusions, spills, and carpet/upholstery cleaning. The cordless option gets into tight spaces and IP54 handles damp environments. Package hourly rates and bundle with dehumidifiers for quick turnaround.
Pop-up Vendor Cooling Rentals
Rent fans with tripods and spare batteries to market vendors, food booths, and craft fairs. Provide day-rate packages with extension cords, battery swaps, and setup. Emphasize outdoor-ready IP54 durability and quiet, variable airflow.
Mobile Auto Detailing Booster
Use the fan to speed-dry shampooed carpets, seats, and headliners, and to cure coatings or adhesives. Hang from interior handles or set freestanding. Faster drying increases daily throughput—sell an “express dry” upgrade.
Event Art and Print Drying
Provide on-site drying stations for workshops, screen-printing booths, and paint parties. Tripod-mounted fans with variable speed accelerate ink and paint curing while keeping dust down. Charge per station or per event.
Pet Grooming Drying Pods
Build portable kennel enclosures with gentle, adjustable airflow from the fan for mobile groomers. Cordless operation suits backyard or van setups. Market as a calm, efficient alternative to loud high-pressure dryers.
Creative
Pop-up Paint-Drying Tent
Build a collapsible PVC frame wrapped in clear plastic with a zipper front. Mount the fan inside using the hang hooks or wall-mount holes to pull air through a small furnace filter opening. The variable speed lets you gently move air to speed paint and finish curing without kicking up dust, and IP54 helps if overspray or humidity is present.
DIY Misting Breeze Box
Add a clip-on misting nozzle ring to the fan grille and feed it from a garden hose or small pump and water jug. Put the fan on a camera tripod (tripod mount) for height control. On battery, it becomes a cordless backyard or campsite cooler for hot days.
Ice-Box Evaporative Cooler
Cut two duct holes into a foam cooler: one for the fan’s outlet and one for intake. Pack the cooler with ice or frozen water bottles and seal the fan to the outlet hole. The fan blows cooled air for patios, garages, or tailgates; IP54 adds moisture resilience.
Gear-Drying Rack
Build a foldable rack with dowels for boots, gloves, and wetsuits. Position the fan on the lower shelf aimed upward or hang it on the rack. Variable speed avoids over-drying delicate items while still turning over air to prevent mildew.
Mini Air Scrubber
Create a shroud that holds a square dust filter over the fan’s intake. Use it near sanding, sawing, or soldering benches to capture fine particulates. Mount it on a wall or tripod to pull dust away from your breathing zone during small projects.