2 x 27.5 in. Track Guide

Features

  • Two 27.5 in extruded rails (forms a 55 in track)
  • Designed for ripping sheet materials at 90° and 45°
  • Anti-slip, splinter-prevention strip to hold the track in place without clamps
  • Rust-resistant, extruded aluminum construction
  • Compatible with 7-1/4 in circular saws on 20V platforms
  • Includes guide rail connector, hex key, and two clamps

Specifications

Track Length 55 in (total)
Rail Length 27.5 in (each)
Material Extruded aluminum, rust-resistant
Compatible Saw 7-1/4 in circular saws (20V platform compatibility stated)
Tool Height 27.5 in
Tool Length 5.2 in
Tool Width 0.4 in
Tool Weight 3.1 lb
Contents 2 extruded guided rails, 1 guide rail connector, 1 hex key, 2 clamps

A two-piece guide rail system (two 27.5 in rails) that forms a 55 in track for guiding a circular saw when ripping sheet materials at 90° and 45°. The rails are extruded aluminum with a rust-resistant finish and an anti-slip, non-chip strip to reduce movement and splintering during cuts. Includes hardware to join and secure the rails.

Model Number: CRT0702

Project Ideas

Business

Mobile Panel Breakdown Service

Offer on-site cutting of plywood/MDF to precise sizes for DIYers and contractors. The 55 in track covers 4 ft rips cleanly, delivering square and splinter-free parts without a shop table saw. Charge per cut or per sheet plus a trip fee.


Custom Closets and Garage Organizers

Build budget-friendly systems from sheet goods using accurate 90° rips and 45° cleats. Sell standardized modules (shelves, cubbies, drawers) cut with the guide rail for consistency and fast installs.


Accent Wall Installations

Specialize in slat walls, chevron patterns, and geometric paneling. Use the guide rail for fast, repeatable strips and miters on-site, reducing dust and rework. Offer tiered packages by material and finish.


Flat-Pack Furniture Kits

Design and sell DIY kits for credenzas, planter boxes, and shelves. Pre-cut panels with clean 45° edges using the track guide, include hardware and instructions, and ship flat to customers.


Workshops and Content + Plans

Run classes teaching track-guided cutting with a standard circular saw, and monetize with downloadable cut lists and project plans. Create short-form videos demonstrating clean rips and miters to drive plan sales.

Creative

Waterfall Edge Credenza

Build a modern plywood credenza with continuous wood grain cascading over the top and down the sides. Use the 55 in track to rip perfectly straight panels and make clean 45° miters for the ‘waterfall’ corners, minimizing splintering thanks to the anti-chip strip.


Chevron Accent Wall Panels

Cut repeatable 45° strips from plywood or MDF to assemble chevron or herringbone wall art or full accent walls. The track’s non-slip grip keeps pieces aligned for clean seams and consistent angles across large panels.


French Cleat Storage System

Create a whole-shop or garage organization system by ripping uniform cleats and accessories. The 45° capability lets you produce long, accurate cleats and the 55 in length easily spans the 48 in sheet dimension for efficient batch cutting.


Slat Wall With Shadow Gaps

Rip narrow, consistent slats from sheet goods and bevel the edges at 45° for crisp shadow lines. The anti-splinter strip leaves factory-smooth edges that need minimal sanding before finishing and mounting.


Outdoor Planter Boxes

Build durable planter boxes with mitered 45° corners for a polished look. The rust-resistant rail handles outdoor use, and the included clamps help secure cuts on long or vertical workpieces.