Features
- Thin wheel profile for reduced burr and cleaner cuts
- Aluminum oxide abrasive formulation suitable for cutting a variety of metals
- Two layers of fiberglass reinforcement to improve wheel strength and reduce breakage
- Depressed centre disc for use on compatible grinders
Specifications
| Product Diameter (In) | 5 |
| Arbor Size (In) | 7/8 |
| Disc Thickness (In) | 0.045 |
| Disc Type | Depressed Centre |
| Number Of Pieces | 25 |
| Product Pack Quantity | 25 |
| Product Length (In) | 5 |
Related Tools
Related Articles
A thin, 5 in cutting wheel with aluminum oxide abrasive for cutting metal. The wheel has a 7/8 in arbor and a depressed centre design. It is reinforced with two layers of fiberglass and sold in packs of 25.
Project Ideas
Business
Mobile Cut-to-Length Service
Offer onsite cutting of angle, rod, tubing, and bolts for DIYers, contractors, and farmers who lack metal saws. The thin, reinforced wheels make quick, clean cuts with minimal burr, saving clients trips to a fab shop.
Upcycled Metal Decor Shop
Produce wall art, house numbers, bottle openers, and small garden pieces from reclaimed steel and sell on Etsy or at markets. Lean on clean edges from the thin wheel to reduce finishing time and increase throughput.
Custom Brackets and Hardware
Fabricate small-batch shelf brackets, plant hangers, cable clamps, and mounting tabs for local builders and cabinet shops. Standardize sizes and offer powder-coated options for higher margins.
Renovation Salvage & Scrap Prep
Provide demolition support by quickly cutting rusted fasteners, conduit, and light steel frames, then sizing scrap for efficient hauling. Bill per hour plus a per-cut or per-load fee.
Auto and Equipment Cut-Off Service
Partner with local garages and landscapers to remove seized bolts, exhaust sections, and rusted brackets on vehicles and small equipment. Offer rapid-response jobs priced as service calls with minimums.
Creative
Scrap-Metal Silhouette Wall Art
Trace simple animal or landscape silhouettes onto sheet steel, then use the thin 5 in wheel to nibble smooth curves and tight corners. Deburr, add patina or high-heat paint, and mount on wood for contrast.
Custom House Numbers
Cut bold, blocky numerals from 1/8 in steel plate using the thin wheel for clean edges. Sand, blacken, and standoff-mount them for a floating, modern look by the front door.
Industrial Shelf Brackets
Cut angle iron and flat bar to length and miter as needed for L-shaped or triangular brackets. Drill holes, clean edges, and clear-coat for a rugged, minimalist set of shelves.
Geometric Garden Trellis
Cut steel rod or flat bar into repeating lengths to form hexagons or diamonds. Tack-weld or rivet intersections, then spray with rust-inhibiting paint for a modern plant support.
Reclaimed Steel Wind Chime
Slice sections of thin-wall tubing, rebar, or old wrenches to varied lengths for differing tones. Deburr, drill small hanger holes, then suspend on fishing line or chain from a metal ring.