Features
- Brushless digital motor for improved efficiency and run time
- Three operating modes: hammer drilling, drilling, and screwdriver
- 1/2 in. keyless ratcheting chuck for quick bit changes and secure bit retention
- 17-stage torque adjustment plus additional clutch positions
- Two-speed gearbox (low/high) for torque or speed-focused tasks
- Integrated LED with pre-light and after-glow to illuminate the work area
- Includes 2.0Ah PWRCore 12 battery with PWRASSIST mobile USB charging
- Includes Automatic PWRJUMP fast charger (partial charge in minutes), belt clip, PH2 bit, and battery jacket
Specifications
| Voltage | 12 V |
| Chuck Size | 1/2 in (keyless ratcheting) |
| Clutch/ Torque Settings | 17+1+1 (17 torque stages plus additional positions) |
| Speed (No Load) | 0–450 / 0–1750 RPM (low / high) |
| Impact Rate (Ipm) | 0–6,750 / 0–25,500 IPM (low / high) |
| Max Torque | 350 in-lbs |
| Tool Dimensions | Height 7.68 in; Length 7.4 in; Width 2.64 in |
| Tool Weight | 2.36 lb (tool only) |
| Battery | PWRCore 12 2.0Ah lithium-ion (manufacturer-stated: ~25% longer run time and 2x battery life compared to prior cells) |
| Battery Features | PWRASSIST mobile charging (USB output) |
| Charger | Automatic PWRJUMP charger (manufacturer-stated: ~25% charge in as little as 5 minutes) |
| What’s Included | Hammer drill, 2.0Ah battery with USB, Automatic PWRJUMP charger, PH2 bit, belt clip, battery jacket |
Related Tools
Related Articles
A compact 12V brushless hammer drill kit for drilling and fastening in masonry and general materials. The kit includes a 2.0Ah PWRCore 12 lithium-ion battery with USB mobile charging and an automatic fast charger. The drill offers hammer, drill and screwdriver modes, variable speed control, multiple clutch settings, and an integrated LED work light.
Model Number: HD5290A-10
Project Ideas
Business
Brick/Concrete Mounting Service
Offer a flat-rate, dust-controlled mounting service for TVs, shelves, mirrors, and whiteboards on brick, block, or concrete walls. The hammer drill’s compact form and 1/2 in keyless chuck speed up bit swaps for pilot holes and Tapcon screws, enabling quick appointments and same-day installs.
Safety & Accessibility Installs
Specialize in installing grab bars, handrails, and baby gates into tile-over-masonry bathrooms and stairwells. Use drill mode with glass/tile bits to pass tile cleanly, then hammer mode for the backing masonry. Offer ADA-compliant placement, sealed anchors, and warranty-backed work.
Exterior Fixings: Numbers, Mailboxes, Cameras
Provide a curb-appeal and security package: mount house numbers, mailboxes, smart doorbells, and camera brackets on brick or stucco. Quick scheduling, neat hole layout with on-tool LED, stainless hardware, sealant for weatherproofing, and a photo verification report for clients/HOAs.
Pop-Up Gallery & Retail Hanging
Serve galleries, cafes, and pop-up shops with rapid hanging of art, signage, and shelving on masonry walls. Bundle services: layout, drilling, anchors, and patch/paint upon removal. The 12V brushless drill’s variable speeds and clutch protect delicate fixtures while working fast.
HOA/Common-Area Hardware Upkeep
Contract with HOAs and property managers to maintain and install bike racks, parking signs, hose reels, and storage hooks on block walls. Offer quarterly inspections, anchor replacement, and quick-response service. Efficient bit changes and fast charging keep turnaround times short.
Creative
Backlit House Numbers on Brick
Create a modern, backlit address plaque by mounting standoff posts into a brick or block wall. Use hammer mode with a carbide masonry bit for small-diameter anchors (Tapcon or sleeve anchors), then switch to screwdriver mode to fasten stand-offs and LED backer. The integrated LED helps align holes at dusk; the compact size makes ladder work easier.
Concrete-Top Side Table
Cast a small concrete slab for a side table, then use the hammer drill to make anchor holes in the cured slab to attach a steel base or hairpin legs with concrete screws. Use drill mode and clutch for assembling the wooden or metal base cleanly without stripping fasteners.
River Stone Wind Chime
Drill small holes through flat river stones to string a layered wind chime. Use quality masonry bits, low speed, intermittent drilling with water for cooling, and light hammer mode only if needed on denser stones. Finish by threading with copper wire or paracord and a wooden hanger.
Balcony Herb Wall on Brick
Build a vertical herb garden using a cedar slat frame and metal planter hooks anchored into brick. Hammer mode handles pilot holes for 3/16–1/4 in masonry screws; use the clutch to drive hooks and brackets without over-torquing. The LED pre-light helps mark holes in shaded corners.
Garage Utility Track System
Install a modular track (French cleat or metal rail) on a concrete or block wall to hang tools, hoses, and bins. Drill evenly spaced anchor holes in hammer mode, then switch to driver mode for secure, clean fastening. Add labels and adjustable hooks for a tidy, high-capacity storage wall.