Brushless 2-in-1 Flip Drill

Features

  • Double-collet flip head for switching between drill and driver bits
  • Compact, slim D-handle design for access to tight spaces
  • Electronically controlled torque settings with dedicated drill mode
  • Magnetic onboard bit storage
  • LED worklight with pre-light and afterglow
  • Two gear speeds
  • Two-way USB-C charging on battery (battery can charge devices and be charged)
  • Includes battery, 20W USB-C PD charger, USB-C cable, belt clip, PH2 bit, and four hex-shank HSS bits
  • Compatible with SKIL 12V or 20V batteries

Specifications

Voltage 12/20 V
Motor Type Brushless
Number Of Gear Speeds 2
No Load Speed 12V: 0–420 / 0–1550 RPM; 20V: 0–450 / 0–1700 RPM
Torque 12V: 300 in-lbs; 20V: 350 in-lbs
Clutch Settings 9 + D (electronic)
Chuck Capacity 1/4 in
Chuck Type Hex collet (double-collet flip head)
Switch Style One-finger variable-speed switch
Electric Brake Yes
Spindle Lock Yes
Forward/Reverse Selector Yes
Lock Off Yes
Soft Grip Yes
On Board Bit Storage Yes
E Torque Yes
Tool Weight 2.03 lbs
Tool Length 7.87 in
Tool Width 2.64 in
Tool Height 7.39 in
Included Battery PWRCORE 20 20V 2.0Ah USB-C battery (BY5100B-00)
Battery Usb C Output Up to 100W (two-way)
Included Charger 20W USB-C PD charger (PD0020B-00)
Battery Charge Time 55–85 minutes (reported values vary in source text)
Included Bits 1 × 2" PH2 screwdriving bit; 4 × hex-shank HSS bits (2 × 3/32", 2 × 1/8")

Cordless flip drill with a double-collet flip head that lets the user switch between drilling and driving bits without changing the chuck. Compact D-handle design for access in tight spaces. Electronically controlled torque settings and a drill mode allow adjustment to different tasks. Magnetic onboard bit storage and an LED worklight with pre-light and afterglow improve bit accessibility and visibility. The kit includes a USB-C battery and a compact USB-C PD charger; the battery supports two-way USB-C power delivery.

Model Number: DL6300D-12

Project Ideas

Business

Kitchen Hardware Swap-Out

Offer a fast, clean service to install cabinet knobs and pulls using a jig. Flip between pilot and driver for each hole, set torque to avoid blowouts on thin doors, and price per door/drawer. Add a package rate for full kitchens.


Flat-Pack Assembly Blitz

On-demand furniture assembly for apartments and offices. The slim D-handle fits tight corners inside carcasses, while the flip head halves cycle time on repetitive pilot/screw steps. Upsell disposal of packaging and offer same-day rush pricing.


Mobile Closet & Shelf Installer

Install wire shelving, closet rods, and wall organizers. Use the LED pre-light for accurate anchor placement, low-speed control for tile or plaster pilots (with proper bits), and torque settings to protect anchors. Charge a per-room fee with materials add-ons.


Tradeshow/Pop-Up Booth Setup

Provide assembly/teardown for booths and displays. Rapid flip between drill/driver speeds repetitive builds, and the USB-C battery powers a label printer or charges client phones. Offer day rates and a maintenance call during the event.


DIY Content + Kit Sales

Create short build videos showcasing fast flip drilling/driver swaps and tight-space work. Monetize with affiliate links and curated hex-shank bit kits; sell a “booth build” or “hardware install” bundle that includes templates and bits.

Creative

Flip-Frame Photo Wall

Create a clean grid of frames on French cleats. Use the flip head to alternate between drilling pilot holes and driving screws without changing bits, the LED pre-light to mark stud locations, and electronic torque to avoid overdriving anchors in drywall.


Hinged Puzzle Box Batch

Batch out small keepsake boxes with concealed hinges and tiny brass screws. Drill precise pilots with low-speed control, then flip to a driver bit. E-torque prevents stripping delicate hardware, and magnetic bit storage keeps small bits at hand.


Fold-Flat Camp Stool

Build a knock-down plywood stool joined with pocket screws and threaded inserts. The compact D-handle fits inside the stool’s angles, and quick flip between a pocket-hole bit and driver speeds assembly. Bring the USB-C battery as a phone power bank at camp.


Live-Edge Floating Shelf

Install hidden brackets and anchors in tight corners. Use hex-shank spade/countersink bits to bore and then flip to drive lag screws. Two speeds and electronic clutch protect threads while the LED afterglow helps verify alignment against a wall.


USB-C Lantern Charging Caddy

Build a bedside caddy that docks the USB-C battery to power a small LED lantern and charge devices. Drill wire pass-throughs and mount hardware quickly with the flip drill; the finished piece doubles as décor and practical power.