Features
- Carbide tip for increased wear life
- U-flute design to clear debris during drilling
- 1/4" hex shank compatible with drive sleeves for quick change between drilling and driving
- SDS Plus connection for use in rotary/hammer drills
Specifications
| Diameter | 5/32" |
| Shank Type | Hex |
| Usable Length | 2" |
| Overall Length | 5" |
| Product Length | 5" |
| Number Of Pieces | 1 |
| Shank / Connection | SDS PLUS |
Related Tools
Related Articles
SDS Plus masonry hammer bit with a carbide tip and a U-shaped flute for debris removal. The 1/4" hex shank interfaces with a drive sleeve to allow switching between drilling and driving.
Project Ideas
Business
Light-Duty Masonry Mounting Service
Offer fast installation of address plaques, doorbell/camera mounts, motion sensors, small signs, and hose guides on brick or concrete using 5/32" pilots for 3/16" concrete screws. Market as a same-day, no-dust, clean install with quick drill/drive swaps.
Low-Voltage Cable & Conduit Clipping
Run network, camera, and LED power cables neatly along block walls by drilling 5/32" holes and fastening conduit straps and cable clips. The SDS Plus bit handles dense masonry; the hex shank saves time switching to the driver for each clip.
Event & Retail Decor Rigging on Brick
Provide temporary or semi-permanent mounting of backdrops, small signs, and light fixtures on masonry interiors. Use 5/32" pilots with removable concrete screws and fill holes afterward if required. Sell as a venue-safe, minimal-impact service.
Urban Patio Trellis & Planter Installs
Design and install custom trellis grids and planter rails on brick facades. Drill precise 5/32" pilots and drive corrosion-resistant screws and stand-offs for long-lasting, tidy hardware. Package includes layout, install, and seasonal maintenance.
Holiday Lights on Masonry Exteriors
Specialize in clean, secure mounting of holiday light clips and cable guides on brick/mortar using 5/32" holes and small concrete screws. The quick-change shank streamlines alternating between drilling and driving, boosting throughput during peak season.
Creative
Masonry Trellis Grid
Drill 5/32" pilot holes in brick or block and drive 3/16" concrete screws to anchor stainless eyelets or cable clamps. String stainless wire in a grid to train ivy or climbing roses. The SDS Plus action keeps holes clean in mortar, and the hex shank lets you swap to a driver instantly to set screws.
Floating House Numbers with Backlight
Mount standoff posts for house numbers on a brick facade using 5/32" pilot holes for 3/16" Tapcon screws. Route a slim LED strip behind the numbers; use additional small clips anchored in mortar to manage the wire run. Quick-change drilling/driving speeds up layout and installation.
Brick Wall Herb Planter Rail
Install a narrow cedar/aluminum rail onto masonry with 5/32" holes and concrete screws, then hang herb pots from hooks. The carbide tip and U-flute clear dust for consistent bite in mortar joints; switch to driver to fasten without changing tools.
Outdoor Fairy-Light Rigging
Create a clean perimeter for patio string lights by drilling 5/32" pilots in mortar and installing masonry cable clamps/eyelets. The quick-change hex shank lets you alternate between drilling and driving fasteners to keep lines taut and tidy.
Cinder Block String-Art Mural
Lay out a pattern on a block wall, drill shallow 5/32" holes, and drive small masonry screws as anchor points. Weave outdoor-rated cord to form geometric art. The small diameter bit creates discreet anchors while the SDS hammer action speeds repetitive drilling.