2" Knockout Punch

Features

  • Cuts up to 10 gauge mild steel and 12 gauge stainless steel
  • Splits slugs for easier punch and die disassembly
  • Laser-etched size markings for identification
  • Threads onto a draw stud (sold separately) for punch and die setup
  • Intended for use with a compatible hydraulic knockout tool (sold separately)

Specifications

Opt Sku DW-DCE600200P
Mpn DCE600200P
Upc/Gtin 885911796392
Product Type Knockout Punches & Dies
Shipping Weight 1.20
Punch Diameter 2"

2" knockout punch for creating conduit holes in sheet metal. Designed to cut up to 10 gauge mild steel and 12 gauge stainless steel when used with a compatible hydraulic knockout tool. The punch threads onto a draw stud (sold separately), includes laser-etched size markings, and is designed to split slugs for easier removal after punching.

Model Number: DCE600200P

Project Ideas

Business

On-Site Panel Knockout Service

Offer a mobile service to add precise 2" conduit entries to electrical panels and stainless enclosures for EV chargers, solar retrofits, and industrial controls. Use the hydraulic knockout setup to handle up to 10 ga mild steel and 12 ga stainless cleanly, minimizing filings versus hole saws. Market to electricians who need fast, clean modifications.


Pre-Punched Adapter Plates & Lids

Produce and sell powder-coated steel or stainless adapter plates with 2" knockouts for disconnects, transfer switches, and control boxes. Keep common layouts in stock and offer custom patterns with laser-etched markings for installers. Sell via Etsy, a small web shop, and local electrical supply houses.


Food Truck/Van Cable Gland Kits

Package stainless pass-through plates punched with 2" holes plus IP-rated cord grips or grommets for food trucks, vans, and mobile vendors. Provide gasket hardware and clear templates for easy DIY installation. Position as a sanitary, professional alternative to jigsaw-cut openings.


BBQ Smoker Vent Kits

Turn punched holes and slugs into complete damper kits for DIY smoker builds. Include the 2" punched opening plate, rotating slug damper, hardware, heat-resistant washer, and instructions. Sell in sets and offer black high-heat powder coat as an upgrade.


Decorative Knockout Hole Plugs

Convert 2" slugs into finished hole plugs with deburring, powder coat, and magnetic or spring-clip backing. Offer color-matched and logo-engraved options for shops, panels, and custom enclosures. Market as a cleaner-looking alternative to generic knockout seals.

Creative

Upcycled Metal Medallions & Coasters

Repurpose the split slugs from the 2" knockout punch as round blanks for coasters, ornaments, and stamped medallions. Deburr and sand the edges, add textures with a hammer or stamps, drill for hanging if needed, and finish with patina, paint, or powder coat. Personalize with initials or logos for gift sets.


Perforated Lanterns and Sconce Covers

Punch patterned 2" openings in sheet steel to create dramatic light spill for lanterns or wall sconce covers. Use the slugs as contrasting inserts or diffusers behind the holes. Finish with high-heat paint and mount over LED candles or bulbs.


BBQ/Smoker Adjustable Vent

Create an air intake/exhaust vent by punching a 2" hole in a smoker drum or grill, then use a deburred slug as a rotating damper plate. Add a pivot bolt, friction washer, and handle to adjust airflow. High-heat coat the components for durability.


Garden Planter Drainage & Irrigation Ports

Add clean 2" drainage holes to metal planters or install bulkhead fittings for drip irrigation pass-throughs. The large diameter improves drainage for big containers and accommodates grommets or strainers. Smooth edges and add rubber grommets to protect hoses.


Van/Trailer Pass-Through Panel

Fabricate a small panel with 2" knockouts for cable glands, shore power, or ventilation in van, trailer, or boat builds. Use stainless sheet for marine environments and mount with a gasket for a neat, sealed installation. Label ports using laser-etched rings around each hole.