Features
- Fully hardened steel body for increased durability
- 3 in. blade width
- 12 in. overall length
- 3/4 in. hex shank
- Intended for chipping and breaking masonry materials
- Includes one chisel
Specifications
| Size | 3 in. x 12 in. |
| Blade Width | 3 in. |
| Length | 12 in. |
| Shank Type | 3/4 in. hex |
| Material | Hardened steel |
| Weight | 2.02 lb |
| Product Type | Scaling chisel |
| Mpn | DW5952 |
| Upc | 028874059528 |
Related Tools
Related Articles
Scaling chisel with a fully hardened steel body intended for chipping and breaking masonry materials. The tool has a 3 in. blade, 12 in. overall length, and a 3/4 in. hex shank. Sold as a single chisel.
Project Ideas
Business
Tile & Thinset Removal Service
Offer rapid floor and wall prep by scaling off ceramic/porcelain tile and thinset using a demolition hammer with the 3/4 in. hex shank chisel. Charge per square foot with add-ons for glue/leveler removal and debris hauling; target flippers, GC’s, and homeowners.
Reclaimed Brick Cleaning & Supply
Source demolition bricks and clean them by chiseling off mortar beds and caps. Sell by the pallet to designers and DIYers, with premium pricing for fully cleaned, sorted, and banded lots. Upsell matching pavers and corner pieces.
Masonry Surface Prep & Scaling
Provide on-site scaling of spalled concrete, parging removal, efflorescence/mortar droppings cleanup, and paint drips on masonry. Bill hourly or by scope; partner with masons and painters for prep before patching, stucco, or coatings.
Custom Textured Concrete & Stone Finishes
Create bush-hammered, fluted, or stippled textures on precast steps, garden walls, and fireplace surrounds using the 3 in. chisel for broad textures. Market to landscape designers and architects; price per linear foot or square foot.
Selective Demo & Openings
Niche service for chipping small openings in CMU/concrete for HVAC, plumbing, and electrical, plus striking off high spots and leveling transitions. Offer dust control and patch-ready finishes; bill time-and-materials with a minimum call-out.
Creative
Carved Stone House Numbers
Use the 3 in. blade to rough out shallow relief numbers on a limestone or sandstone slab, then refine with finer chisels. The wide scaling edge quickly removes material for backgrounds; paint or gild the numerals and mount at the entry.
Textured Concrete Wall Art Panels
Cast thin concrete panels or use large pavers, then chip geometric patterns, flutes, and scallops with the 3 in. edge for bold textures. Stain or limewash for contrast and hang as a modern brutalist art series.
Reclaimed Brick Herb Planters
Turn old bricks into modular planters by chiseling cavities and drainage channels. Stack and mortar into custom shapes; the 3 in. blade is perfect for shaving mortar nubs and flattening faces for clean joints.
Mosaic Material Harvest & Tabletop
Salvage intact tiles from demo sites by scaling off thinset and adhesive without shattering the glaze. Use the rescued pieces to create a mosaic cafe table or backsplash with authentic patina.
Garden Path from Split Concrete
Upcycle broken sidewalk slabs into organic stepping stones. Use the chisel to split, shape edges, and expose aggregate for traction, then set in sand with groundcover between stones.