Black & Decker Stackable Storage System - 3 Piece Set (Small, Deep Toolbox, and Rolling Tote)

Why I reached for this stackable set

Moving tools from my garage to the driveway, a friend’s place, and the occasional jobsite has always been a juggling act. I wanted something that could live as a single unit when I’m on the move, then split into manageable pieces when I get where I’m going. The Black & Decker stackable set fits that brief: three modules that lock together into a rolling tower, with just enough structure and simplicity to keep setup fuss-free.

Over several weeks, I used it for everything from basic home repairs to a small backyard project. I also tried it as general storage for hobby gear to see how it behaves outside of tool use. In short, it’s a practical, lightweight modular system aimed squarely at homeowners and DIYers who want better organization without investing in a heavy-duty, professional-grade ecosystem.

Design and build quality

The set is three boxes that stack and lock:
- A rolling tote on the bottom, with wheels and a telescoping handle.
- A deep toolbox in the middle, with a removable tray.
- A shallow, small toolbox on top for parts and accessories.

Stacked, it measures roughly 28.5 inches tall by 19.7 inches long and 14.6 inches wide. Empty, the tower weighs about 19.4 lb. The modules connect using an auto-lock stacking latch at the front. Each lid closes with toggle latches, and there’s a quick-release latch that lets you pop a single module off without unstacking the whole tower.

The plastic is not industrial-thick, but it doesn’t feel flimsy either. I’d put the build squarely in the “light to moderate duty” category. The wheels are a medium diameter—fine for pavement, garages, and short stretches of hard-packed dirt. They’re less happy with gravel or tall curb transitions, where I found I needed to tip and guide the set carefully.

Setup and modularity

Setup was painless. The modules arrive ready to use; there’s no assembly to do. The stack latch is intuitive: align, set down, and the front latch clicks the boxes together. To remove a section, unlatch and lift—no wrestling required. Being able to unlock the middle or top box without stripping the tower down is genuinely useful. I’d roll the tower to where I needed it, pop the middle box, and keep the bottom tote as a rolling base.

Inside, the deep box’s removable tray is a nice touch. I used the tray for frequently used hand tools—utility knife, chisels, a tape measure—so I could lift the tray and have quick access to the larger tools underneath. The small top box is straightforward and opens wide, making it easy to see fasteners and bits at a glance.

Capacity and organization

Here’s what I comfortably fit in each module:

• Rolling tote: circular saw with blade guard, drill/driver kit, small random-orbit sander, extension cord, and a compact 18V battery charger. Taller tools like a jigsaw or angle grinder fit upright. Because it’s the heaviest box when loaded, keeping it at the bottom is the right call for stability.

• Deep toolbox: hand tools (hammer, pliers, screwdrivers, layout tools) under the tray, plus the tray itself for the items I reach for constantly. I also stashed a small box of wire nuts and a voltage tester in the tray for electrical work.

• Small toolbox: screws, anchors, driver bits, a compact bit set, and a few small parts organizers. It doesn’t include dedicated dividers, so I used zip bags and small bin cups to keep fasteners separated. If you do a lot of fastener-heavy work, you may want to add a standalone parts organizer.

The footprint is efficient. It fits easily in a trunk or hatchback without needing to fold seats. At under 30 inches tall, the stack clears most cargo covers.

Portability and handling

The telescoping handle is well placed and sturdy enough for the system’s target loads. I’m average height, and I could pull the tower without hunching. Rolling across concrete, asphalt, and indoor floors felt smooth. Over thresholds and short steps, I needed to tilt and pull the tote up individually—which is expected for a set this size. If your routine involves frequent stairs, plan to break the tower down first.

Weight management matters. The system itself is 19.4 lb empty. It’s easy to overload the deep box with ironmongery and make it uncomfortable to carry. My rule of thumb: keep dense, heavy items in the rolling tote; hand tools and lighter accessories in the middle; small parts up top. That keeps the center of gravity low and the stack stable.

Durability and protection

The latches close firmly and stayed shut in use. I tossed the tower in and out of a vehicle several times and didn’t see any creep in the connections. The stacking latch shows minor scuffing after a few weeks, but no structural concerns.

This is not a waterproof or dustproof system, and it doesn’t claim to be. Light rain or a dusty garage won’t hurt it, but I wouldn’t leave it in a storm or expect it to keep fine dust out on an all-day concrete demo. The wheels are securely mounted and rolled true under load. I’d avoid dragging the tower sideways—the axle isn’t built for that kind of abuse.

If you’re planning heavy trade use or frequent transport in rough conditions, you’ll want to step up to a more rugged, jobsite-rated storage ecosystem. For homeowner and light DIY use, the durability is appropriate.

Everyday use notes

• The quick-release for individual modules is more than a convenience; it changes how you work. I was able to roll the tote into a garage, pop the deep box off for the bench, and lift the small box to a shelf—all in a minute.

• The removable tray in the deep box saved time. I could set it beside me and avoid constant lid flipping.

• The small box benefits from your own organization add-ons. A few labeled cups or small bins make it much more useful.

• The tower doesn’t wobble under typical loads, but avoid tall, top-heavy packing. Keep batteries, nails, and heavy hardware low.

Limitations and trade-offs

• Plastic latches and shell: suitable for household projects, less so for daily construction abuse.
• No IP rating: not intended for wet, dusty jobsites or long-term outdoor storage.
• Wheels: fine on smooth surfaces; less pleasant on rough gravel or high curbs.
• Parts organization: the small box lacks built-in dividers; plan to add organizers.
• Ecosystem compatibility: this set is self-contained. It’s not designed to interlock with other brands’ pro ecosystems.

Tips to get more from it

• Label each module on the front and lid. It speeds up grabbing the right box.
• Use the deep box tray for high-frequency tools; stash duplicates or seldom-used items underneath.
• Keep heaviest items in the rolling tote to maintain stability.
• Add foam or pouches to protect delicate tools or finish blades during transport.
• Toss a desiccant pack in each box if you store the set in a humid garage.
• If you travel with non-tool items (craft supplies, automotive gear, grooming kits), the small box and tray layout adapt well—just add small containers.

Who it suits best

• Homeowners and DIYers who want a single rolling solution for general tools.
• Hobbyists who need modular storage they can reconfigure per project.
• Light trade users who don’t require weather sealing or jobsite-grade toughness.

If you’re a contractor hauling gear over rough terrain daily, you’ll likely outgrow this set’s protection and wheel size. If your use is periodic and mostly on smooth surfaces, it hits a sweet spot.

Pros

• Simple, reliable stacking and quick-release.
• Thoughtful module mix: rolling tote, deep box with tray, small box.
• Manageable size that fits easily in car trunks and home storage.
• Good balance of weight and capacity for homeowner tasks.
• No assembly required; ready to use out of the box.

Cons

• Not weather-sealed; not for harsh site conditions.
• Plastic latches and smaller wheels limit long-term heavy-duty use.
• Top box needs added organizers for best results.
• Easy to overload if you pack dense hardware high in the stack.

Recommendation

I recommend this Black & Decker stackable set for homeowners, DIYers, and light-duty users who want an organized, portable system without the cost or heft of jobsite-grade alternatives. It’s easy to roll, quick to reconfigure, and the module mix covers the basics well. Keep heavy items in the bottom tote, add a few small organizers to the top box, and you’ll have a tidy, efficient setup that makes moving tools simpler. If you need weather sealing, large wheels, and pro-level ruggedness for daily site use, consider a heavier-duty ecosystem. For everything else, this set is a practical, budget-friendly way to bring order to your tools.