Features
- Induction-hardened alternating top bevel (ATB) carbide teeth for longer cutting life
- Clear anti-stick coating to reduce friction, heat, and corrosion
- Thin kerf for reduced cutting resistance
- Anti-kickback shoulders for more consistent cuts
- Expansion slots to reduce vibration and improve runout
- Diamond knockout arbor allowing 5/8-inch or diamond-shaped arbor use
- 60-tooth configuration for fine finishing cuts
Specifications
| Blade Diameter | 7-1/4 in. |
| Number Of Teeth | 60 |
| Kerf | 0.06 in. |
| Tooth Composition | Carbide |
| Arbor | 5/8 in. plus diamond knockout |
| Anti Kickback Shoulder | Yes |
| Expansion Slots | Yes |
| Anti Stick Coating | Yes |
| Package Quantity | 10 pc |
| Cut Finish | Ultrafine |
Related Tools
Related Articles
Circular saw blades designed for smooth, precise cuts and a fine finish with minimal tear-out. Teeth are induction-hardened and alternately beveled to maintain sharpness and extend cutting life. A clear, anti-stick coating reduces friction and heat and helps resist rust and oxidation. The blades have a thin kerf to reduce load on the saw, expansion slots to reduce vibration, and a diamond knockout arbor that allows use with either a 5/8-inch arbor or a diamond-shaped arbor for broader compatibility. Sold as a 10-blade pack.
Model Number: 75760B10
Project Ideas
Business
Trim and casing micro-service
Offer on-site installation of baseboards, crown, and door/window casings with chip-free miters and paint-ready joints. Rotate through the 10-pack of blades to maintain premium cut quality all day.
DIY slat wall/acoustic panel kits
Manufacture and sell pre-cut, finish-sanded slats bundled with felt backing and spacers. The thin kerf minimizes material waste, improving margins while delivering furniture-grade edges.
Mobile cut-to-size cabinet panels
Provide a track-saw cutting service for melamine and veneered plywood, delivering chip-free, dimensioned parts to DIYers and small shops that lack panel-processing equipment.
Custom picture frame pop-up
Set up at markets to build made-to-measure frames with flawless miters. Upsell mats and glass, and use the 10-pack to guarantee consistently sharp cuts for high customer throughput.
Stair tread and nosing fabrication
Precut and miter stair treads, risers, and laminate nosings for flooring installers. The fine-finish blade reduces splintering on prefinished materials, saving time on touch-ups.
Creative
Gallery-grade picture frames
Cut flawless 45-degree miters in hardwood or prefinished molding for custom frames. The 60T ATB teeth and thin kerf deliver glass-smooth, chip-free edges that glue up tight with minimal sanding.
Acoustic slat wall panel
Rip uniform slats from MDF or veneer plywood with minimal tear-out, then mount over felt for a modern acoustic feature wall. The blade’s anti-stick coating and expansion slots help keep cuts straight and clean during long rips.
Chevron/herringbone tabletop
Create a striking tabletop by cutting precise strips and miters from hardwood or plywood. The ultrafine finish yields tight joints and crisp pattern lines with less post-sanding.
Floating melamine shelves
Cut melamine-coated boards to size with near-zero chipping, then apply edge banding and mount on concealed brackets for sleek, modern shelves.
Segmented lamp or bowl rings
Crosscut accurate angled segments from thin hardwood stock using a sled. The fine-tooth blade produces clean end-grain surfaces for seamless segmented turning or laminated lamp shades.