DeWalt Web Anchor Strap - Choker (Large and Small D-Rings) - 4 ft

Web Anchor Strap - Choker (Large and Small D-Rings) - 4 ft

Features

  • Choker-style web anchor strap for use around beams, posts or other structural members
  • Includes large and small D-rings for connection options
  • 1-3/4 in (44 mm) polyester webbing strength member with 2-3/4 in (70 mm) polyester wear pad for abrasion and contamination resistance
  • Can be used as a vertical or horizontal temporary anchor point
  • Compact and lightweight for portability on job sites
  • Meets anchor-point strength requirements for fall protection systems

Specifications

Length 4 ft (1.2 m)
Width 1.75 in (44 mm)
Weight 1.31 lb (0.5 kg)
Webbing Material Repellent polyester webbing (strength member) / polyester wear pad
Wear Pad Width 2.75 in (70 mm)
Minimum Breaking Strength (Anchor Point) 5,000 lb (≈23 kN)
Rated User Capacity 310 lb (140 kg) (product listing specification)
Standards / Compliance ANSI Z359.18-2017; OSHA 1926.502; OSHA 1910.140
Warranty 2 Year Limited Warranty
Upc 0810091651803

Choker-style web anchor strap intended for temporary fall-protection anchoring. It wraps around structural members (beams, posts, etc.) and provides a horizontal or vertical anchor point. Constructed from polyester webbing with an additional wear pad for abrasion and environmental resistance.

Model Number: DXFP811004

Project Ideas

Business

Residential Rooftop Safety Setup Service

Offer a mobile service that installs temporary anchors (using the 4 ft choker strap on appropriate structural members), provides harness/lanyard kits, and gives a 30-minute training and job hazard analysis for homeowners and small trades doing short-duration roof tasks. Deliver documentation photos, a simple rescue plan outline, and same-day pickup.


Fall-Protection Kit Rental & Maintenance

Rent curated kits (anchor straps, harnesses, SRLs/energy lanyards, connectors, edge guards) with pre-use inspections, serialized tracking, and digital check-in/out. Offer weekly or monthly plans for small contractors, with swap-outs when contamination or wear is detected. Upsell consumables and on-site setup by a competent person.


Onsite Anchor & PFAS Workshops

Run paid, hands-on training for crews focused on anchor selection, choker strap installation, inspection criteria for webbing and wear pads, and correct connector use with the dual D-rings. Include practical drills using a portable beam stand, issue completion certificates, and bundle discounted gear sales after class.


QR-Based Inspection and Asset Tracking

Launch a SaaS + tagging service that assigns each anchor strap a QR code for mobile inspections, photo logs, retirement criteria, and reminders aligned to OSHA 1910.140/1926.502. Provide fleet dashboards for contractors, compliance exports for audits, and analytics on usage and replacement cycles.


Safety Content + Affiliate Commerce

Create a YouTube/TikTok channel and blog demonstrating correct use of web anchor straps (vertical vs. horizontal, edge protection, compatible connectors), common mistakes, and quick jobsite checklists. Monetize via affiliate links, sponsorships, and a micro-store that sells pre-bundled, compliant anchor kits for roofers, steel erectors, and maintenance pros.

Creative

Roof and Ladder Transition Safety Kit

Assemble a compact kit that uses the 4 ft choker-style web anchor strap to create a temporary tie-off on a ridge beam, attic rafter, or chimney/structural post. Pair it with a harness, 6–8 ft energy-absorbing lanyard or SRL, edge protectors, and a rope grab lifeline for safer gutter cleaning, shingle swaps, or holiday light installs. Use the large D-ring for connection, verify structure strength, protect edges with the wear pad, and follow ANSI/OSHA practices.


Portable Anchor Training Stand

Build a foldable A-frame or compact steel I-beam stand to practice proper choker wraps, vertical vs. horizontal anchoring, connector compatibility with the large/small D-rings, and pre-use inspection of polyester webbing and wear pad. Add laminated quick-reference cards and a QR-coded checklist so crews can drill correct setup and documentation before going on-site.


Overhead Tool and Camera Tether Anchor

Use the strap around a beam or scaffolding ledger to create a dedicated anchor for tool tethers and a lightweight action camera lanyard to document work. The 5,000 lb-rated anchor point helps organize drop-prevention tie-offs; keep loads minimal (tethering only) and do not use for lifting loads. The wear pad helps resist abrasion when wrapped over rough steel or timber edges.


Barn/Loft Work Zone Tie-Off

For installing barn lights, fans, or signage, wrap the strap around a timber or steel beam to create a temporary personal fall-arrest anchor. The 2.75 in wear pad helps protect both the strap and the substrate. Route lanyards cleanly along the beam to avoid snags and maintain overhead tie-off geometry.


Wall-Mounted Storage & Inspection Station

Craft a wall rack with UV-sheltered cubbies and drainage for drying and storing anchor straps, plus hooks for connectors. Add QR-coded tags to each strap linking to digital inspection logs, date-of-first-use, and warranty tracking. Include a magnifier and light for webbing inspection and a simple go/no-go checklist aligned to ANSI Z359.18.