Features
- Self-feed spur for steady material penetration
- Dual cutting edge for improved durability when contacting nails
- Hollow center flute for chip removal
- Heat treated and tempered for increased wear resistance
- 7/16 in ball-groove shank for quick bit changes
Specifications
| Diameter | 5/8 in |
| Overall Length | 6 in |
| Flute Length | 4 in |
| Shank Diameter | 7/16 in |
| Shank Type | Ball groove |
| Material | Hardened alloy steel |
| Finish | Bright silver |
| Cutting Direction | Right-hand |
| Intended Use | Drilling/enlarging holes in wood for electrical junction boxes and running pipe |
| Upc | 028874116658 |
Related Tools
Related Articles
Short ship auger bit designed for drilling in wood. It has a self-feed spur to maintain penetration, a dual cutting edge to resist damage from nails, and a hollow center flute to remove chips. The bit is heat treated and tempered for durability and uses a 7/16 in ball-groove shank for quick bit changes. Typical uses include drilling or enlarging holes for electrical junction boxes and creating rough openings for plumbing.
Project Ideas
Business
Peg-Rail Organizer Product Line
Manufacture wall-mounted peg-rails and compatible shelves using 5/8 in dowels for pegs/supports. Batch-drill with the self-feeding auger to keep production quick and consistent, even in reclaimed stock. Sell modular sets (rail, 8–12 pegs, two shelves) online and at markets; offer custom lengths and wood species.
Wholesale Propagation Stands
Produce minimalist propagation stations with 5/8 in tube seats sized for 16 mm glass. Sell wholesale to plant shops, florists, and boutiques. The auger’s hollow flute speeds chip ejection, reducing cycle time; build jigs to drill multiple blocks at once and scale with simple sanding/oiling workflows.
Reclaimed Luminary & Gift Line
Turn nail-laden barn boards and fence posts into perforated LED lanterns and pen/pencil caddies. The auger’s dual cutting edge tolerates incidental nail contact, making reclaimed material viable. Position as sustainable home goods with custom patterns (initials, logos, constellations) and offer corporate gifting.
On-Site Cord Pass-Through Service
Offer a mobile service adding clean 5/8 in cord grommets to desks, built-ins, credenzas, and conference tables in offices and homes. The short auger reaches tight cabinetry and drills cleanly without tear-out. Upsell with brass/wood grommets, under-desk cable trays, and power strip mounting.
Pre-Drill Support for Trades
Partner with electricians, AV installers, and smart-home pros to pre-drill 5/8 in runs in studs and blocking for low-voltage wiring and small conduit. The self-feed spur speeds repetitive drilling and the quick-change shank keeps tool swaps fast. Offer same-day service for old-home retrofits where hidden fasteners are common.
Creative
Modular Peg-Rail + Shelf System
Drill a grid of 5/8 in holes into reclaimed hardwood planks to accept 5/8 in dowels as pegs and shelf supports. The self-feed spur keeps the holes straight and consistent, and the dual cutting edge lets you work confidently in nail-prone barn wood. Add removable shelves that sit on two pegs each for a customizable entryway or workshop organizer.
Propagation Station Test Tube Rack
Create a sleek plant propagation stand by drilling 5/8 in holes across a hardwood block to snugly hold 16 mm glass test tubes. The hollow center flute clears chips fast for crisp, burn-free holes. Add a chamfer to each opening, oil the wood, and mount the block to a minimalist base for a clean, modern look.
Blanket Ladder with Dowel Rungs
Build a minimalist blanket ladder by drilling 5/8 in through-holes at a slight upward angle in two side rails, then inserting 5/8 in dowel rungs. The short 6 in bit is ideal for accurate drilling in tight shop setups, and the quick-change shank speeds the repetitive work. Glue and pin the rungs for a rock-solid, lightweight ladder.
Cable-Managed Desk Top
Add clean 5/8 in pass-throughs for lamp and charger cords to a desktop or media console. Use the self-feeding spur to start precisely where marked, even on vertical faces or inside cabinets. Line the holes with brass ferrules or a light chamfer for a finished look and run cords invisibly under the surface.
Perforated Lantern from Reclaimed Wood
Drill a constellation of 5/8 in holes in four reclaimed wood panels, then assemble them around an LED candle to create a moody lantern. The bit’s dual cutting edge resists damage if you hit hidden brads, and the heat-treated steel holds sharpness across dozens of holes. Vary hole spacing for artistic light patterns.