DeWalt Chainsaw Kit Box

A chainsaw tossed loose in the truck bed is a recipe for nicked chains, oily messes, and a scuffed-up tool. I’ve been looking for a purpose‑built way to carry a battery saw and its essentials between jobs, and the kit box from DeWalt gets a lot of the basics right: sized for their lineup, space for a battery and charger, and a compartment for a 5/32 in. file. After several weeks of hauling it around, here’s how it stacks up.

Fit and compatibility

DeWalt designed this case for its own saws, and that’s the lens you should use. It’s compatible with these models: DCCS620, DCCS670, DCCS690, DWCS600, DCCS672, and DCCS677. I ran it primarily with a 16 in. FlexVolt saw, and the fit was tidy with the scabbard installed. The body nests where it should, the bar channel gives enough clearance for the guard, and the lid closes without compressing the chain brake.

If you’re on one of the listed 12–16 in. platforms, you’ll likely have a similar experience. Owners who run aftermarket spikes, oversized bars, or unusual scabbards should check clearance—this is a molded case with specific geometry, not a universal tote. It’s also worth noting that “compatible” here means those models; if your saw isn’t on that list, assume you’ll be improvising the fit.

Layout and storage

Inside, the case is organized around three things you actually need on site:
- A dedicated pocket for one battery
- A slot for one charger
- A molded holder for a 5/32 in. sharpening file

That last detail matters. Many of DeWalt’s saws run chains that use a 5/32 in. file, and having a specific, secure home for it means it’s not rolling around or getting lost. If your chain spec calls for a different file diameter, you can still stash it, but it won’t nest in that molded channel as cleanly.

The single battery and single charger storage is the right minimum. I could position a second battery in the open cavity without stressing the lid, and there’s enough free space for gloves, a small bottle of bar oil, and a spare chain in a pouch. Just remember this is a “kit box,” not a rolling toolbox—the goal is to keep the critical pieces together and protected, not to carry your entire bench.

Nothing extra is included; the case ships by itself. Battery, charger, and file are all separate purchases, which is fine by me—most folks buying this already own those pieces.

Build quality and handling

Empty, the case weighs 5,670 g (about 12.5 lb). Loaded with a saw, one battery, and a charger, it’s a one‑hand carry across a jobsite. The shell feels robust and the hinge alignment stayed true after repeated open‑and‑close cycles. The lid doesn’t flex enough to worry me when cinched shut.

As for the handle, mine has been serviceable, but I’d still call it the most vulnerable element of any molded case. The attachment points are plastic, so if you’re the type to yank it out of the truck by one corner with 30 pounds inside, you’re inviting trouble. Carried normally, it’s held up fine. If I could change one thing, I’d add metal reinforcement to the handle brackets for long‑term peace of mind.

A practical note: chainsaws are oily by nature. The case keeps grime off your cab and protects the saw from knocks, but it’s not a sealed container. If you store your saw wet with bar oil and pitch, put an absorbent pad or rag in the bottom and wipe the saw before stowing it. That small habit keeps the interior from becoming a slick mess.

In use

What I appreciated most is how fast it is to load and unload. The saw drops into the footprint without hunting for alignment. The battery pocket makes it obvious whether you’re leaving the yard with a charged pack, and the charger slot means the cord doesn’t migrate into the chain. That kind of built‑in organization directly saves time.

Transport-wise, the kit box shines in a crowded truck. It stacks neatly, won’t crush a scabbard, and it’s easy to spot the bright case among dull totes. For quick trim work, I’d grab the case, toss in a small oil bottle, and have everything I needed to cut, sharpen, and pack back up without touching a larger toolbox.

What could be better

• Battery capacity: Many pros carry two or three packs. The dedicated storage is for one. You can tuck extras into the open space, but a second molded bay would make sense for modern cordless workflows.
• File flexibility: The dedicated 5/32 in. file slot is great when it matches your chain, but a more agnostic holder (or a small tool tray) would accommodate the full range of file diameters and guides.
• Handle reinforcement: The handle has been fine under normal use, but if you routinely max out payloads, a reinforced design would reduce worry.

None of these are dealbreakers; they’re refinements that would push the case from very good to excellent for heavy users.

Durability check

I’ve dragged the case through a few muddy sites, bounced it in and out of a trailer, and used it as an impromptu seat. The shell shrugged off scuffs and the hinge still tracks smoothly. The latching action has stayed consistent. I don’t baby my cases, and this one feels on par with DeWalt’s better storage products in terms of impact resistance. Again, just keep in mind it’s not weather‑sealed; don’t leave it open in the rain expecting everything inside to stay dry.

Value

There are cheaper ways to carry a saw—generic blow‑mold cases, plastic bins, even a contractor bag. They’ll hold a saw, but they won’t hold a system. The appeal here is that the saw, one battery, one charger, and a maintenance tool all live together in a protective shell that’s sized for DeWalt’s lineup. If you’re invested in these saws, that integration matters. If you run mixed brands or need to carry multiple packs and a full sharpening kit, a larger toolbox or a modular system may fit you better.

Tips for getting the most out of it

• Keep the scabbard on when storing the saw. It preserves the bar edge and keeps anything else in the case from being chewed up.
• Add an absorbent liner in the base to manage oil. Replace it periodically.
• Prepack a small zip pouch with a spare chain, scrench, and wedges. The open space accommodates a compact kit without clutter.
• Label the battery pocket with your pack size. It’s a quick check before leaving the shop.

The bottom line

The kit box does exactly what a dedicated chainsaw case should: it protects the saw, corrals the essentials, and makes grab‑and‑go transport simple. The molded layout for DeWalt’s platforms gives it a leg up over universal cases, and the interior has just enough extra room to tailor it to your routine. I’d like to see accommodation for a second battery and a more flexible file/tool area, and heavy‑duty users might want a more robust handle design, but those are wants, not needs.

Recommendation: I recommend this case to anyone running a compatible DeWalt chainsaw who wants a clean, organized way to move the saw, one battery, a charger, and a sharpening file between sites. It’s a well‑built, purpose‑designed carrier that streamlines everyday use. If you require storage for multiple batteries or you’re outside the listed models, you may be better served by a larger, more modular storage solution—but for the target saws and a lean kit, this is the right box for the job.