DeWalt Heavy Duty Work Stand

A compact, tough stand that pulls double duty

A good set of supports is the quiet hero of a jobsite. After a few months with DeWalt’s aluminum work stand, I’ve come to rely on it as a go‑to platform for cutting, assembly, and even miter‑saw duty with the optional brackets. It folds small, carries light, and shrugs off heavy loads—exactly what I want in a stand I’ll move a dozen times a day.

One note up front: the stand is sold individually. For most tasks—breaking down sheet goods, supporting long stock, building a quick assembly table—you’ll want a pair.

Setup and portability

The appeal starts with the folding mechanism. Flip the leg lock levers and the legs swing into place with a positive, reassuring snap. Fold‑up is just as quick, and the legs nest neatly to create a compact package roughly 32 by 36 by 11 inches. At 15.4 pounds, carrying one is easy. Carrying two is still comfortable thanks to a built‑in transport latch that clips a pair together so they behave like one unit, balanced at your side. That latch is a small thing that ends up making a big difference over the course of a day.

The aluminum build feels well finished, with smooth edges and stout hardware. The capped feet plant firmly on flat surfaces. There’s no height adjustment, so on truly uneven ground you’ll need to mind your placement or shim with scrap. On concrete floors and subfloors, I had no issues with rocking once the legs were fully locked.

Capacity and stability

DeWalt lists a 1,000‑pound capacity per stand, which is more than most users will ever need. I never approached that limit, but I did stack wet framing lumber, throw a thick butcher‑block top on top, and park a 12‑inch sliding miter saw for extended cutting sessions. The stand stayed composed. There’s minimal torsional flex when loaded, and no disconcerting sway when the legs are correctly splayed and locked.

Because the stand is relatively narrow front‑to‑back, placement matters. Set the legs so your load sits over the footprint, not outside it, and you’ll get rock‑solid performance. As with any sawhorse‑style support, long rips on sheet goods are smoother and safer with two stands spaced appropriately.

Everyday uses

Most of the time, I use two stands as sawhorses. The top rails are flat and friendly to a variety of setups. For sacrificial surfaces, I’ll screw or clamp 2x material to the rails and cut directly on top, or toss down a few strips of rigid foam for sheet goods. The aluminum doesn’t mind the occasional nick from a circular saw, and it doesn’t swell or splinter like homemade wooden horses.

For assembly work, a sheet of plywood spans two stands nicely to create a lightweight, quick table. If you’re trimming doors or sanding face frames, the 32‑inch height is comfortable for most tasks without stooping.

As a miter saw stand

Add the optional DW7231 brackets and the stand transforms into a sturdy tool platform. The brackets mount to your saw’s base and clip onto the rails, letting you pop the saw on and off quickly. I appreciate being able to keep the saw on the stand in the shop, then release it and stow everything compactly for transport. Stability with the saw mounted is excellent, provided you keep the saw’s center of mass within the stand’s footprint.

There are two trade‑offs to understand. First, the brackets are an extra cost, so factor that into your budget if you plan to run the stand as a saw station. Second, unlike full‑length rolling miter saw stands, this setup doesn’t include material support wings or stops. If you regularly crosscut long trim or framing, you’ll want auxiliary supports or a second stand with a support roller to keep the work at height.

Durability and maintenance

Aluminum construction keeps weight down and resists corrosion. I’ve used the stand outdoors in damp conditions without any signs of rusting hardware or paint bubbling. The leg locks remain crisp with no slop after repeated cycles. Wipe it down occasionally, clear sawdust from the latches, and it seems content to live a hard life in a truck bed.

Fit and finish on my samples have been very good overall. On one, a decal was slightly misaligned—purely cosmetic. More importantly, all functional labels and safety markings were present, and the hardware was tight and properly assembled out of the box.

DeWalt backs the stand with a 3‑year limited warranty, a year of free service, and a 90‑day satisfaction guarantee. For a piece of shop infrastructure that will likely outlast a few tools, that’s reassuring.

What I’d change

A few thoughtful tweaks would make a great stand even better:

• Adjustable feet: A small amount of height adjustment would help on irregular ground.
• Accessory ecosystem: I’d love to see a simple, integrated solution for material support wings that attaches directly to the rails, avoiding a full upgrade to a rolling stand.
• Clearer packaging: Because many users will want two, obvious “sold individually” labeling saves a return trip.

None of these are deal‑breakers, and they don’t detract from the stand’s core strengths.

Who it’s for

• Pros who need robust, portable supports that set up fast and take a beating.
• Remodelers and finish carpenters who want a flexible platform for saw duty one day and an assembly table the next.
• DIYers looking to upgrade from wobbly, heavy wooden horses without spending rolling‑stand money.

If you already rely on a dedicated rolling miter saw stand with long material wings and stops, this won’t replace it. If you need one solution that covers sawhorse, assembly table, and occasional saw stand, this shines.

Practical tips

• Buy two. Most tasks benefit from a pair, and the transport latch makes carrying both together painless.
• Use sacrificial tops. A couple of 2x4s or strips of rigid foam protect the rails when cutting sheet goods.
• Mind your footprint. Keep the weight centered over the legs, especially with point loads or a mounted saw.
• Clip and go. If you’re using the brackets, pre‑mount them to your saw and leave them in place. It saves setup time and encourages you to actually stow the saw between jobs.

The bottom line

The DeWalt stand strikes a sweet balance of strength, weight, and versatility. It’s quick to deploy, confidence‑inspiring under load, and compact enough that you won’t dread moving it. With the optional brackets, it doubles as a straightforward miter saw platform; without them, it’s a superb sawhorse and general‑purpose support. The lack of adjustable feet and add‑on costs for accessories are worth noting, but they don’t overshadow the core value here.

Recommendation: I recommend this stand. It’s a dependable, portable foundation for a wide range of jobs, and a pair will likely replace a pile of heavier, wobblier alternatives in your shop or truck. If you need integrated material supports or wheels, look at a full miter saw stand; otherwise, this is a smart, durable choice that earns its keep immediately.