Oscillating Multi-Tool Bi-Metal Plunge Cut Blade

Features

  • Starlock-compatible mounting
  • Bi-metal (BIM) construction
  • Plunge-cut blade geometry
  • 0.75 in blade width
  • 1.5 in maximum cutting depth
  • Sold individually

Specifications

Model Number OSL034F
Material Bi-metal (BIM)
Width (In) 0.75
Immersion Depth (In) 1.5
Pack Quantity 1
Upc 0000346480276

Plunge-cut blade for Starlock-compatible oscillating multi-tools. Constructed from bi-metal for general cutting tasks. Blade width is 3/4 inch with a maximum immersion (cutting) depth of 1.5 inches. Sold as a single blade.

Model Number: OSL034F

Project Ideas

Business

Precision Cabinet & Hardware Retrofits

Offer on-site plunge-cut services for recessed pulls, strike plates, sash lifts, cable pass-throughs, and flush mounts. The Starlock blade delivers clean mortises in installed millwork without removal.


Door Casing Undercut & Flooring Repairs

Provide pre-flooring door-jamb undercuts and surgical plank repairs. The narrow blade undercuts casings against a spacer and lets you cut out damaged flooring sections along seams with minimal demo.


RV/Van/Closet Upfit Cutouts

Specialize in clean retrofit openings: ventilation slots, utility panels, cable pass-throughs, and access hatches in thin plywood and composites, where controlled 1.5 in plunge depth prevents overcuts.


Small-Batch Slatted Vents & Cable Grommets

Manufacture modern wooden vent covers, media cabinet backs, and desk cable grommet plates using repeatable 0.75 in plunge slots. Sell standardized sizes on Etsy/local markets with custom options.


Plunge-Cut Jigs & Templates

Design and sell 3D-printed or CNC-cut templates that guide a 0.75 in oscillating blade for common cutouts (recessed pulls, latch plates, cord ports). Bundle with video tutorials and a Starlock blade upsell.

Creative

Laminated Knife Block/Desk Organizer

Cut 1.5 in-deep slots into two matching wood blanks using the 0.75 in blade, then glue the halves together to create deeper knife or tool channels. Great for steak knives, chisels, pens, or screwdrivers with clean, repeatable slots.


Geometric Inlay Art Board

Plunge-cut crisp channels for brass rod, veneer, or colored epoxy inlays on a serving board or wall art. The narrow blade makes tight radii and repeatable straight grooves easy with a simple edge guide.


Minimalist Finger-Pull Cabinets

Create recessed finger pulls on drawer fronts and cabinet doors by plunging a centered slot and softening the edges. The 3/4 in width yields a comfortable, modern pull without external hardware.


Slatted Speaker Grill/Vent Cover

Use a spacer jig to plunge a series of parallel 0.75 in slots for a sleek mid-century grill or cabinet vent. Back the panel with fabric or mesh for a finished, professional look.


Secret Compartment Box

Plunge precise internal cavities and access slots in a small box to hide valuables or magnets for a puzzle-style lid. Bi-metal durability lets you cut through wood with stray fasteners safely.