Premium Segmented Tuckpointing Blade

Features

  • Segmented rim for faster, controlled cutting
  • Compatible with small angle grinders (standard 7/8" arbor)
  • Suitable for removing mortar from brick and similar masonry joints

Specifications

Upc 000346677638
Arbor 7/8", 5/8"
Weight 0.70 lb
Diameter 4 in
Part Number DBTP0401
Intended Use Removing old/weathered mortar and cleaning out joints for tuckpointing
Cutting Depth 1 in
Pack Quantity 1
Regulatory Note Proposition 65 warning applies (may expose to chemicals known to cause cancer or reproductive harm)

4-inch segmented rim diamond blade intended for removing old or weathered mortar from brick joints. Designed for tuckpointing and for use on standard 7/8-inch arbor angle grinders (5/8-inch arbor noted as an alternative).

Model Number: DBTP0401

Project Ideas

Business

Mobile Tuckpointing & Repointing Service

Offer per-linear-foot mortar removal and repointing for residential facades, chimneys, and garden walls using the 4-inch tuckpointing blade on a dust-shrouded grinder. Differentiate with mortar color matching, clean edges, and same-week scheduling. Upsell brick sealing and minor brick replacement.


Historic Masonry Color-Match Specialist

Niche service for pre-war and landmark buildings: remove deteriorated joints, analyze original mortar composition and color, then repoint with historically appropriate mixes. Market to architects and preservation societies; provide sample boards and documented methods for approvals.


Chimney Tune-Up Packages

Seasonal, flat-rate chimney repointing bundles: remove cracked crown and vertical joint mortar, repoint, install cap, and apply a breathable water repellent. Leverage the blade’s control in tight joints. Offer realtor-ready reports and multi-chimney discounts for property managers.


Brick Patio Rehab & Edge Definition

Specialize in refreshing brick patios and walkways: clean out failed joints, reestablish crisp borders, and refill with durable mortar or polymeric sand where appropriate. Add-ons: drainage checks, step re-bedding, and sealant. Quick turnarounds priced per square foot plus linear border footage.


DIY Repointing Kit + Workshop

Bundle the 4-inch segmented blade with a compatible grinder shroud, vacuum adapter, tuckpointing trowels, joint raker, pigment samples, and a step-by-step guide. Sell online/local hardware and host weekend workshops. Monetize through kit sales, class fees, and optional on-site consulting.

Creative

Contrasting Mortar Art Wall

On a non-structural brick garden wall, selectively remove 1-inch-deep mortar in a geometric pattern (chevrons, diamonds, or waves) using the 4-inch segmented blade. Refill those joints with a contrasting, pigment-tinted mortar to create a durable, weatherproof mural that reads from the street. Mask off adjacent bricks, work in sections, then seal for color pop.


Salvaged Brick Planter Build

Use the blade to clean old mortar off reclaimed bricks, preserving the patina while making them stack-ready. Dry-fit a stepped planter or raised herb bed, then lay with a lime-based mortar that matches the vintage look. Cap with cleaned soldier-course bricks for a crisp top edge.


Patio Pattern Refresh

On a tired brick patio, remove weathered joints along selected courses to create stripes or borders. Repoint those joints with colored mortar or polymeric joint compound to introduce subtle patterns (charcoal border, terracotta field) without lifting the field bricks. Finish with a breathable sealer.


Inset House Numbers in Mortar

Cut shallow channels in vertical and horizontal mortar joints to create a rectangular recess for metal address numbers or a plaque. The 1-inch cutting depth lets you inset the hardware flush to the wall without cutting bricks. Rebed the plaque in fresh mortar, achieving a clean, integrated look.


Brick Coffee Table Top

Harvest thin faces from damaged bricks by freeing them from old mortar joints, then arrange the faces in a wood frame to form a table top. Grout with a contrasting mortar; the segmented blade helps clear and square edges for tight seams. Finish with a matte seal to resist rings and spills.