Features
- Chamfered edge on wrench head for easier engagement with fasteners
- 15° offset open end to increase arc swing in tight areas
- Full polish chrome finish
- Stamped hashmark pattern on handle for added grip points
- Size stamped twice on both sides of handle for easier identification
- Stamped markings designed to resist wear
- Full lifetime warranty
Specifications
| Is It A Set? | Yes |
| Number Of Pieces | 5 |
| Unit Of Measure | Metric |
| Wrench Type | Flare nut |
| Included Sizes | 7 x 9, 8 x 10, 11 x 13, 12 x 14, 17 x 19 |
| Offset | 15 degree |
| Finish | Full polish chrome |
| Handle Material | Steel |
| Size Marking | Stamped twice on both sides of handle |
| Assembled Depth (Inches) | 8.2 |
| Assembled Height (Inches) | 1.3 |
| Assembled Width (Inches) | 2.4 |
| Assembled Weight (Lbs) | 1.135 |
| Warranty | Full Lifetime Warranty |
Related Tools
Five-piece metric flare nut wrench set with chamfered heads and a 15° offset open end to improve engagement and access in confined spaces. The wrenches have a full polish chrome finish and stamped markings for size identification and additional grip.
Project Ideas
Business
Mobile Brake & Clutch Line Service
Offer on-site inspection, repair, and replacement of metric brake and clutch hard/soft lines for cars and light trucks. The 7–19 mm flare set prevents damage to flare nuts on ABS modules, master cylinders, and calipers. Upsell stainless line upgrades and fluid flushes. Market to owners of European/Japanese vehicles and fleet managers.
Moto/Scooter Hydraulic Upgrade & Bleed Van
A mobile service focused on motorcycles and scooters: braided line installs, hose rerouting, and full system bleeds. Flare wrenches protect compact fittings on masters and calipers, and the 15° offset speeds tight-area work. Sell package deals (front+rear lines, fresh pads, fluid) and scheduled maintenance plans.
Cafe Espresso Machine Leak & Steam Power Tune
Provide quarterly maintenance for coffee shops: inspect/replace compression fittings, descale, and reseal steam/water circuits. The flare set’s range fits common metric unions and avoids rounding soft brass. Offer tiered service plans, emergency leak calls, and training for staff on daily care to reduce downtime.
Pre-Sale Safety Prep for Used Cars
Partner with small dealers and private sellers to offer a brake/fuel line safety refresh: check corrosion, replace suspect unions, and perform a professional bleed. The flare nut set speeds work on tight, rusty fittings without damage. Bundle with pad/rotor checks and fluid changes for a trust-boosting service report.
Hands-On Fittings Workshop + Tool Rentals
Run weekend classes teaching safe work on flared fittings: cutting, flaring, torqueing, and leak testing. Provide rental kits that include the 5-pc flare set, flaring tool, cutter, and bleed kit. Monetize through class fees, rentals, and selling curated tool bundles with a lifetime warranty angle.
Creative
Classic Car Brake & Fuel Line Revival
Refresh a vintage Euro/JDM car’s brake and fuel hard lines without rounding soft fittings. Use the 7–19 mm flare wrenches to break free corroded unions at the master cylinder, ABS module, and fuel filter. The chamfered heads and 15° offset help you snake around cramped engine bays, while the double-stamped sizes keep you moving fast. Finish with stainless hard lines and a full bleed for safer, firmer pedal feel.
Motorcycle Braided Brake Line Upgrade
Swap aging rubber hoses for braided stainless lines on a sport bike or cafe build. The 8/10/12 mm flare nuts on master cylinders and calipers are protected by the flare wrench jaws, reducing slip and rounding in tight spaces. Route new lines cleanly, torque fittings, and bleed for a firmer lever and sharper bite—great functional upgrade with a custom aesthetic.
Espresso Machine Steam-Line Tune-Up
Restore an espresso machine’s steam and water lines by replacing worn compression fittings and gaskets. The set’s 11–14 mm sizes and 15° offset make boiler and grouphead access easier. Protect soft brass/steel fittings with the flare jaws, reseal with food-safe compounds, and pressure-test. The result: faster heat-up, fewer leaks, and better steam power.
Drift Kart Hydraulic Handbrake Build
Fabricate a compact hydraulic handbrake system for a kart or small project car. Mount the lever/master cylinder, run hard/soft lines, and secure unions with the 7–13 mm sizes. The chamfered flare heads help start nuts squarely in awkward orientations, and the chrome finish cleans up easily after cutting/bleeding fluid. Finish with tidy clamps and a custom bracket.
MTB Hydraulic Brake Hose Shorten & Bleed
Dial in cockpit fit by trimming hydraulic brake hoses and installing new olives/barbs. Use the 7–10 mm flare wrench on hose nuts and bleed fittings to avoid rounding small hexes. The offset angle improves access around calipers and levers. After a clean bleed, you’ll have crisp lever feel and a clutter-free bar setup.