WORKSHOP Wet/Dry Vacs Shop Vacuum Accessories WS12502A Crevice Tool Attachment for Wet Dry Vacuum Cleaners, Fits 1-1/4-inch Extension Wands and Hoses

Why I reached for this crevice tool

I needed a simple, durable way to reach the narrow places my bulkier nozzles couldn’t touch—between the truck seats, along baseboards, and into the corners behind machines in the shop. The standard wide attachments move a lot of air, but they leave bits behind in tight spots. The WS12502A crevice tool from WORKSHOP is a basic 1-1/4-inch accessory with a tapered, slim profile, and after a few weeks of regular use, it’s become the default nozzle I leave on my 1-1/4-inch hose.

It’s not flashy. It just works—precisely where you want a crevice tool to earn its keep.

Design and build

This is a straightforward, hard-plastic crevice tool with a long, tapered neck and a narrow mouth. The plastic is rigid with a touch of flex at the tip, and the molding quality is clean with no sharp seams. The mouth opening is narrow enough to concentrate suction without choking airflow to the point of constant clogging. The tip has a slight bevel, which helps it ride along edges or get into tracks and seams without digging in.

At 1-1/4 inches in diameter, the body is slender compared to the chunkier 1-7/8 and 2-1/2 inch shop-vac standards. That smaller profile is the whole point: it goes places larger hoses and adapters won’t. The overall length is a bit longer than many OEM crevice tools I’ve used, which improves reach under seats and behind cabinets.

Fit and compatibility

This accessory is sized for 1-1/4-inch hoses and wands. On my 1-1/4-inch shop vac hose, it fits snugly with a friction connection—no wobble, no air leaks. It also mates cleanly to a 1-1/4-inch extension wand, which is handy for getting behind stationary tools without moving them.

A quick note on sizing for anyone mixing systems:
- If your vacuum uses 1-7/8-inch or 2-1/2-inch accessories, this won’t plug in without an adapter.
- Some brands use locking tabs or proprietary collars. This crevice tool is a plain friction-fit. It stays put on standard 1-1/4-inch ends, but don’t expect a twist-lock to engage unless your hose’s lock ring is designed to bite onto smooth accessories.

If you’re unsure, measure your hose OD/ID or check your vac’s accessory spec. For central vacs and compact shop vacs, 1-1/4 inch is common; for heavier-duty shop vacs, you’re more likely to see 1-7/8 or 2-1/2 inch.

Performance in the shop and car

This is where the tool earns its spot. Concentrating the same motor suction into a smaller opening gives you the “pinpoint” effect you want in crevices. I used it to:
- Clear packed sawdust from miter saw fence tracks and router table corners
- Pull debris from the garage door tracks and sliding door channels
- Clean tight baseboard gaps and around anchor bolts where chips collect
- Reach between vehicle seats, seat rails, and console seams
- Vacuum along tool stands and under shelving where the big nozzle can’t fit

On fine dust, chips, and typical garage debris, pickup is excellent. The narrow mouth lets you get right into corners instead of hovering over them. On pea-sized stones or long stringy shavings, you’ll need to watch for bridging at the tip—typical crevice-tool behavior. A quick tap or a light twist usually clears it.

Wet pickups and clogs

This is a wet/dry accessory, so it’s fine for small liquid pickups in tight spots—think condensation or a minor spill along a sill plate. That said, the narrow opening and tapered neck aren’t ideal for large volumes of water or thick sludge. If you’re vacuuming wet messes frequently, switch to a broader nozzle to avoid slow flow and reduce the chance of blocking the inlet with leaves or clumps.

On dry material, clogging is rare unless you combine long, curly shavings with heavier grit. If you do jam it, the smooth interior clears easily by backflushing or pulling the clump out at the tip.

Ergonomics and reach

The longer body is a plus. It gets into footwells without you folding yourself in half and lets you skim along baseboards without ramming the hose into the wall. The slim barrel is easy to rotate, which matters more than you might think: rotating the tool gives you better control in seams and keeps airflow from sealing off on flat surfaces.

A small quirk: because it’s longer than some stock crevice tools, it may not drop perfectly into certain onboard storage slots. Mine doesn’t lock into one vac’s holster but still stows fine in the accessory tray. Not a dealbreaker, just a heads-up.

Durability

This is thick enough to survive shop life. I’ve knocked it off a bench and dragged it across concrete; the finish scuffs but doesn’t crack. The tip has held its edge without gouging. You shouldn’t pry with it, but it’s sturdy for normal use. In colder weather, the plastic stays stable—no brittle snap when flexed lightly.

If you’re routinely vacuuming along painted or delicate surfaces, note that any hard-plastic tip can scuff if you lean into it. A simple fix is a very light hand or a quick pass with fine sandpaper to soften the leading edge.

Limitations and caveats

• Strictly 1-1/4-inch sizing: without an adapter, it won’t fit larger hose systems.
• No locking interface: relies on friction. On a clean, undamaged hose end, that’s fine, but if your hose collar is worn, you may want a wrap of tape for a tighter fit.
• Narrow mouth means more focus, less flow: great for corners, not for rapid bulk pickup.
• Static build-up can happen in very dry conditions, as with most plastic accessories. A damp cloth wipe or anti-static spray helps if you notice dust cling.
• Slightly longer than some OEM crevice tools: may not seat in certain onboard storage docks.

None of these are surprises for a basic crevice tool, but they’re worth knowing.

Practical tips for better results

• Don’t press the mouth flat to a surface; leave a hair of clearance to maintain airflow and avoid “sticking” the nozzle.
• For vehicle interiors, run it along seams while slowly rotating the tool—this keeps the opening from sealing and lifts grit from stitching.
• If you’re tackling track systems (doors, windows), vacuum once, then brush with a nylon pick or old toothbrush, and vacuum again; the crevice tool gets the loosened grit.
• Use a short 1-1/4-inch extension wand for behind-tool cleanups; you get reach without losing control.
• For tight friction fits, a tiny smear of silicone-free furniture polish on the hose end makes connections smoother without making them loose.

Value

As a replacement or add-on, this is exactly the kind of accessory that should be easy to justify: inexpensive, durable, and versatile. Compared to proprietary brand parts, the WORKSHOP crevice tool offers equal or better fit and materials at a lower price, provided you’re in the 1-1/4-inch ecosystem. It’s the sort of thing you buy once, toss in the accessory bin, and end up using constantly.

Bottom line and recommendation

The WS12502A crevice tool does the job a crevice tool should do: it reaches where bigger nozzles can’t and focuses suction right in the corners. The build is solid, the fit on 1-1/4-inch hoses is snug, and the longer reach is genuinely useful in vehicles and around the shop. It won’t fit larger hose standards without adapters, and the friction-only connection won’t please fans of locking collars, but those are common tradeoffs with universal 1-1/4-inch accessories.

I recommend it. If your vacuum uses 1-1/4-inch hoses or wands and you need a reliable, no-nonsense crevice tool for tight spaces, this piece is a smart, low-cost upgrade. If your system is 1-7/8 or 2-1/2 inches, look for the equivalent size or plan on a reducer—otherwise you’ll miss out on what this simple, effective tool does best.