Features
- Tool-free replacement for onsite serviceability
- Accepts single fasteners and clip assemblies
- Compatible with 8 mm and 0.300" head fasteners
- Accepts fastener/clip lengths from 1/2" to 2-7/8"
- Accepts 1/4" threaded studs
Specifications
| Compatible Fastener Head Sizes | 8 mm; 0.300 in |
| Compatible Fastener/Clip Lengths | 1/2 in – 2-7/8 in |
| Compatible Threaded Studs | 1/4 in |
| Compatible Tool Model | DFD270 |
| Part Number/Sku | DFD2702 |
| Color | Black |
| Number Of Pieces | 1 |
Related Tools
Related Articles
Single-shot nose piece for use with the DFD270 powder-actuated tool. Enables the tool to accept single fasteners and clip assemblies. Compatible with 8 mm and 0.300-inch head fasteners and clips in lengths from 1/2 inch to 2-7/8 inches, and with 1/4-inch threaded studs. The nose piece can be replaced without tools.
Project Ideas
Business
Rapid MEP Clip Installation Service
Offer per-linear-foot installation of conduit, pipe, and cable clips in warehouses and parking structures using the DFD270 with this nose piece. Carry assortments of 8 mm and 0.300 in head clip assemblies and fasteners from 1/2 in to 2-7/8 in to match substrates, enabling same-day turnarounds.
Signage and Equipment Mounting with Studs
Specialize in mounting signs, guards, and light-duty equipment to concrete and steel using 1/4 in threaded studs for removable installs. Provide templating, layout, and hardware, then set studs quickly onsite. Upsell stainless hardware and standoffs for premium looks.
IT and Data Cable Management Retrofits
Provide weekend retrofit packages for offices and light industrial spaces: install ceiling and wall clip assemblies, ladder-tray supports on studs, and tidy drops. The tool-free nose piece swap keeps crews moving, while compatibility with multiple head sizes means you can stock one kit for most substrates.
Onsite DFD270 Service and Training
Offer mobile maintenance where you inspect tools, replace worn nose pieces tool-free, calibrate power loads, and train crews on selecting proper fastener lengths and clip types. Bundle with replenishment of compatible pins, clips, and 1/4 in studs on a subscription.
Prepacked Mounting Kits eCommerce
Sell task-specific kits—string-light anchors, plant-wall studs with standoffs, safety chain points—each with compatible 0.300 in head fasteners or 1/4 in studs, nuts, and clear install guides for the DFD270. Target property managers and DIYers needing quick, reliable concrete/CMU solutions.
Creative
Modular Concrete Plant Wall
Use the 1/4 in threaded stud capability to set a grid of studs into a block or poured-concrete wall, then add standoffs and crosswires to create a living trellis for climbing plants. The single-shot nose piece lets you place studs precisely and vary fastener length (1/2 in to 2-7/8 in) based on substrate. Add modular hooks or shelves by threading them onto the studs.
Industrial Floating Shelf System
Mount steel angle brackets into CMU or poured concrete using 0.300 in head single fasteners sized to the wall thickness. The nose piece accepts both single pins and clip assemblies, so you can also add wire-management clips beneath each shelf. The variety of fastener lengths helps you tune embedment for solid vs hollow block.
Garage Ceiling Utility Grid
Create a grid of 1/4 in threaded studs in a basement or garage slab ceiling to accept eye nuts, light clips, and small utility hangers for extension cords, shop lights, or air hose. The single-shot nose piece speeds placement while clip assemblies can be added along joists for cable routing. Keep loads light and within hardware ratings.
Removable Art Panels with Standoffs
Shoot 1/4 in threaded studs into a warehouse or studio wall, then use spacers and cap nuts to mount plywood or metal art panels with a clean standoff look. Panels can be swapped without new holes. The nose piece’s compatibility with 8 mm/0.300 in heads also lets you add discreet clip anchors for cable lighting around the display.
Outdoor Hose and Cord Raceway
Run a tidy hose/extension cord route along a foundation by shooting compatible clip assemblies at intervals. Use shorter fasteners where the substrate is thin and longer ones where needed for solid embedment. Add a few 1/4 in studs as fixed anchor points for reels or hose guides at corners.