Features
- Produces up to 11 tons of force
- Punches split slugs from 1/2" to 2"
- Threadless draw stud connection for punch/die setup without holding the tool
- Inline body with 180° rotatable head for tight spaces
- Detent head holds punch/die system in place before, during, and after punch completion
- Embedded magnets in knockout dies (dies sold separately) for alignment
- Bright LED lights to illuminate the work area
- Shoulder strap and connection ring for portability
- Chip pocket accepts Tool Connect™ chip for asset management (chip included)
- Crimp Connect® software compatibility for job data reporting
- Compatible with DEWALT 1/2"–6" knockout dies and punches (sold separately)
Specifications
| Force Output | Up to 11 tons |
| Punch Capacity (Material) | Up to 10 gauge mild steel; up to 12 gauge stainless steel |
| Punch/Slugs Handled | 1/2"–2" (slug splitting) |
| Compatible Dies | 1/2"–6" knockout dies and punches (sold separately) |
| Battery System | 20V MAX* lithium-ion |
| Battery Included | DCB203 2 Ah Li‑Ion (1 included) |
| Battery Amp Hours | 2 Ah |
| Charger Included | Yes |
| Number Of Batteries Included | 1 |
| Motor Type | Brushed |
| Dimensions (H X W X D) | 15.38 in x 7.81 in x 23.06 in |
| Product Weight | 22 lb |
| Power Tool Type | Cordless, specialty (power base/knockout) |
| Tool Kit Contents | TOUGHSYSTEM 2.0 case; 20V MAX hydraulic knockout tool; DCB203 2Ah battery; charger; 7/16" knockout draw stud (DCE600DS716); 3/4" knockout draw stud (DCE600DS34); shoulder strap; USB‑C cable; Tool Connect™ chip |
| Led Light | Integrated work light |
| Warranty | 3 Year Limited Warranty; 1 Year Free Service; 90 Days Satisfaction Guaranteed |
| Return Policy | 90‑day returnable (per retailer) |
Related Articles
Hydraulic knockout tool kit powered by a 20V lithium-ion battery system. The tool produces up to 11 tons of force for knockout operations, uses an inline body with a 180° rotating head for access in confined spaces, and supports threadless draw-stud setup so punches/dies can be aligned without holding the tool. Knockout dies are sold separately and contain magnets for alignment.
Project Ideas
Business
Mobile Knockout Service for Electricians
Offer on-call, on-site knockout punching for panels, NEMA enclosures, and conduit entries. The cordless 20V system and 180° head excel in cramped electrical rooms, and the threadless setup accelerates multi-hole jobs. Use Crimp Connect® for job documentation and the Tool Connect™ chip for asset tracking. Bill per hole or per panel prep.
Solar/Battery Enclosure Prep
Specialize in prepping BOS enclosures for solar contractors: clean conduit knockouts, cable gland holes, and monitoring penetrations in steel or stainless NEMA boxes. Provide standardized hole maps by inverter/model, deliver fast turnarounds with the 11-ton punch, and include QC reports using the tool’s data software as part of compliance documentation.
Food Truck & Van Upfitting
Provide precise holes for wiring pass-throughs, plumbing bulkheads, vent ports, and sensor fittings in mobile kitchen and van conversions. The inline body with rotating head works inside vehicles and cabinets; stainless up to 12 ga expands use on commercial fixtures. Package services with grommet/bulkhead installation and deburring for turnkey results.
HVAC/Ductwork Porting Service
Serve HVAC firms with on-site holes for pressure taps, temperature probes, access ports, and damper controls in ducting, plenums, and hoods. The detent head holds punches steady on awkward surfaces, and the tool handles common sheet gauges cleanly. Offer per-port pricing and volume discounts for commissioning projects.
Makerspace Punching Bureau & Rentals
Run a service bureau at a makerspace or fab shop: operator-assisted hole punching with a stocked die library (1/2"–6" sold separately), plus supervised rentals. Use the Tool Connect™ chip for check-in/out and utilization tracking, and offer classes on layout, safety, and finishing. Monetize through memberships, per-hole fees, and project packages.
Creative
Perforated Lanterns & Luminaria
Create sculptural lanterns from mild steel tubes or flat sheet rolled into cylinders, punching repeating 1/2"–2" hole patterns for light effects. The 180° rotating head and inline body make it easy to work inside cylinders, while the magnets in the dies help align patterns. Use the LED to illuminate layout marks and the detent head to hold the setup steady for consistent spacing.
Custom Instrument & Switch Panels
Fabricate professional-grade panels for arcade cabinets, sim rigs, audio racks, or classic car dashboards with precise knockouts for buttons, toggle switches, gauges, and cable glands. The tool’s 11 tons of force handles up to 10 ga steel/12 ga stainless for durable panels, and the threadless draw stud speeds swapping between punch sizes for multi-diameter layouts.
Rain Barrels & Garden Hardware
Convert steel drums into rain barrels and garden planters with clean holes for bulkhead fittings, spigots, and overflow lines. The rotating head allows access close to curves and tight spots, while the detent head secures the die on awkward surfaces. Offer decorative hole patterns near the top for aeration in planters.
Smoker & Grill Mods
Upgrade smokers and grills with precise air intake ports, thermometer and probe pass-throughs, and accessory mounts. The tool’s capacity for 10 ga mild steel covers many pit builds, and slug-splitting punches reduce cleanup. Use 1/2"–2" sizes for intakes and accessory holes; add grommets or bushings for a clean finish.
Decorative Acoustic Wall Panels
Punch uniform round-hole arrays in mild steel sheets to create decorative acoustic covers over mineral wool or felt. The magnets aid alignment row-to-row, the LED helps see scribe lines in low light, and the detent head keeps the die stable over long, repetitive runs for crisp, repeatable patterns.