DeWalt 20V MAX 6-Tool Combo Kit with Large Rolling Bag

First impressions and what’s in the rolling bag

I rolled the bag into the shop, unzipped the top, and immediately appreciated how cohesive this DeWalt 6‑tool kit feels. Every tool is brushless, the controls are familiar across the line, and the rolling bag is genuinely jobsite-ready—rigid sides, big zippers, and wheels that don’t balk at thresholds. Inside are the essentials: a compact drill/driver, 1/4 in. impact driver, oscillating multi‑tool, reciprocating saw, 6‑1/2 in. circular saw, 5 in. random orbital sander, two 20V 2.0 Ah batteries, and a DCB115 charger. There are belt hooks, a few starter accessories, and a universal adapter for non‑DeWalt oscillating blades.

It’s a complete starter ecosystem on the 20V MAX platform, and it’s clear the kit is tuned toward general carpentry, light demo, installation, and finish sanding. If you’re already on 20V MAX, the cross-compatibility is a given; if you’re not, this is a credible entry point.

Drilling and driving

The compact drill/driver hits a sweet spot for weight and power. It’s not the shortest nose in DeWalt’s lineup, but it’s well balanced with the 2.0 Ah pack and comfortable for overhead or cabinet work. The LED under the chuck has a 20‑second post‑trigger delay that’s more useful than it sounds; I used it to line up hinge screws inside a dark pantry without juggling a flashlight. The drill’s output is rated at 340 UWO, which in practice handled spade bits through studs and step bits in electrical boxes without stalling. The clutch ring has positive detents and the 1/2 in. chuck grips consistently.

The impact driver is straightforward: single speed with a wide variable trigger range and up to 1,500 in‑lbs of torque. That’s not class‑leading, but it’s plenty for structural screws, ledger lags with pre-drilling, and decking. The 3‑LED ring eliminates shadows around the bit, and the motor is smooth with minimal startup jerk. If you depend on multiple electronic modes for delicate work, you won’t find them here, but I had no trouble controlling small fasteners by feathering the trigger.

Cutting performance: circular and recip saws

The 6‑1/2 in. circular saw is the standout for me. It’s compact, quick to set, and feels more refined than many kit-included saws. Bevel and depth adjustments are tool‑free and tight, and the blade brake is quick. With a sharp 24‑tooth blade, it ripped 2x stock cleanly and crosscut framing with authority. Depth at 90° tops out at 2‑1/8 in., so standard dimensional lumber is covered. The rafter hook is a very welcome touch. A couple of notes: a 6‑1/2 in. blade does sacrifice a bit of speed on long rips compared to a 7‑1/4 in. saw, and the included blade is serviceable but basic. For finish work, swapping to a 40‑tooth blade dramatically improves cut quality.

The reciprocating saw is compact for its class, with a brushless motor and a keyless clamp that changes blades without burned fingers. It’s well suited to cutting nails, PVC, and pruning. Vibration is controlled well enough that I could make flush cuts without the tool skating away from the work. There’s no orbital mode, so aggressive fast wood cuts lag behind larger recip saws, but the tradeoff is finer control and less fatigue. The tool‑free clamp and open shoe make blade changes and plunge starts simple.

Oscillating multi‑tool and the sander

The oscillating tool includes a universal accessory adapter and DeWalt’s tool‑free blade clamp, which is as fast and secure as any on the market. The three‑speed selector actually matters: speed 1 for controlled drywall cutouts and delicate trim scribing, speed 3 for ferrous cuts and aggressive grout removal. The interface holds common third‑party blades snugly with the adapter. It doesn’t ship with a depth guide, which would be nice for consistent plunge depths in drywall or flooring, but the tool’s accuracy is still high once you get a feel for it.

DeWalt’s 5 in. random orbital sander is an excellent inclusion. Variable speed from 8,000 to 12,000 opm and low vibration make it easy to run for extended sessions. I used it to surface sand a maple top and then scuff‑sand cabinet doors; dust collection with the one‑hand locking bag is decent, and it improves significantly when connected to a vac via an adapter. Start-up and brake behavior are controlled—no gouges when you set down on the work.

Battery life and charging reality

All tool bodies are brushless, which helps runtime and longevity, but the kit ships with two compact 2.0 Ah batteries. For drilling, fastening, punch‑list tasks, and even intermittent oscillating cuts, they’re fine. Where I ran into limits was continuous work on the saws and the sander. Extended rips, long demolition cuts, or sanding a whole room’s worth of trim will have you swapping packs mid‑task.

The good news is the included DCB115 charger is a 4‑amp unit. In practical terms, a 2.0 Ah pack goes from nearly empty to charged in roughly half an hour, which kept me moving with a rotation. If you anticipate saw‑heavy days, I’d budget for higher‑capacity packs (4.0–6.0 Ah). The tools wake up with noticeably more stamina on a 5.0 Ah battery, and the weight penalty is manageable on everything except perhaps the sander for long sessions.

Ergonomics, lights, and the small touches

• Grip and balance are consistently good across the kit; DeWalt’s handle profile fits medium and large hands well, and the overmold isn’t too soft.
• The drill’s post‑trigger LED delay is genuinely useful in cabinets and crawlspaces; the impact’s 3‑LED ring reduces shadows around the fastener.
• Belt hooks are included and ambidextrous.
• The circular saw’s sightline is clear, and the shoe sits flat and true on sheet goods. The depth and bevel scales are easy to read.
• The oscillating tool’s quick‑change lever is glove‑friendly and hasn’t loosened over time.

Noise is what you’d expect: the recip saw barks under load, the impact snaps on heavy screws, and the sander is relatively civilized at lower speeds. None were out of step with their categories.

The rolling bag and jobsite portability

I’m skeptical of kit bags, but this one is better than most. The rolling base and telescoping handle take the strain out of moving the set, and the bag keeps its shape when open, which makes it easier to find what you need. It will get heavy when fully loaded with tools, batteries, and blades, and there’s limited internal partitioning. I added a couple of soft pouches to keep blades and sanding discs from turning into a jumble. The exterior fabric and stitching have held up to real-world site abuse.

What I’d change

• Battery capacity in the box: Two 2.0 Ah packs are fine for a punch list but undersized for saw‑centric projects. A 4.0 or 5.0 Ah upgrade transforms the experience.
• Included consumables: The starter blades get you going, but you’ll want a higher‑tooth circular saw blade for clean cuts and a mixed oscillating blade set.
• Impact driver modes: The single‑mode design is simple and effective, but a low‑speed or precision mode would add versatility for cabinet hardware.
• Accessories: A depth guide for the oscillating tool would be a welcome addition for consistent plunge cuts.

None of these are deal-breakers; they’re areas where the kit plays it safe to keep the price and breadth in check.

Value and who it’s for

This kit makes the most sense for three groups:
- New users entering DeWalt’s 20V MAX system who want a capable set in one shot.
- Trades and serious DIYers who need a reliable, brushless everyday lineup for remodel, install, or maintenance work.
- Existing DeWalt users who want a second setup for a truck or crew and will leverage existing higher‑capacity batteries.

All six tools are legitimate daily drivers, not stripped‑down “kit-only” variants. The shared ergonomics, consistent triggers, and brushless motors give the whole set a cohesive, professional feel. Add the faster charger and the rolling bag, and it’s a practical bundle rather than a marketing exercise.

Recommendation

I recommend this DeWalt 6‑tool kit for anyone who needs a capable, thoughtfully assembled cordless lineup with real jobsite chops. The tools themselves are the right mix: a compact drill and impact for most fastening, saws that can handle framing and trim with appropriate blades, a genuinely useful oscillating tool, and a sander you’ll reach for often. The brushless motors pay off in smooth performance and durability, and the DCB115 charger keeps compact packs cycling quickly.

The main caveat is battery capacity. If your work leans heavily on the saws or long sanding sessions, plan on adding 4.0–6.0 Ah batteries. Do that, and this kit scales from punch‑list tasks to full project days without complaint. As a foundation for the 20V MAX platform—or as a well-rounded expansion—it’s a smart, balanced choice.