Features
- Elastic/stretch construction to reduce tangling and allow movement (4 ft to 6 ft range)
- Internal energy absorber to limit fall forces
- Integrated impact indicator for fall detection and removal-from-service indication
- QR code and RFID tag for quick inspection and asset/inspection system registration
- Protected label pack to help preserve inspection/identification labels
- Available in single and twin leg configurations; steel and aluminum connector options
Specifications
| Length | 6 ft (1.8 m) |
| Stretch Range | 4 ft to 6 ft (1.22 m to 1.8 m) |
| Webbing | 1.73 in (40 mm) polyester webbing |
| Webbing Minimum Static Strength | 5,000 lbs (22.24 kN) minimum static strength |
| Gated Hook Rating | ANSI-rated 3,600 lbs (16 kN) for gated hooks |
| Materials | Polyester webbing; zinc-plated steel hardware (connector material may vary by model) |
| Net Weight | Approximately 2.62 lbs (1.19 kg) |
| Gross Weight (With Packaging) | Approximately 2.87 lbs (1.30 kg) |
| Standards/Compliance | Meets ANSI Z359.13-2013; OSHA 1910.140; OSHA 1926.502 |
| Warranty | 2 Year Limited Warranty |
| Upc | 00810091651575 |
Related Tools
Related Articles
Elastic stretch lanyard with an internal energy absorber. Designed to reduce snags and allow user movement while providing fall-arrest protection. Equipped with steel snap hooks on both ends, an integrated impact indicator to show when the device has experienced a fall, and QR/RFID tags for inspection and asset management. Available in single- and twin-leg variants and with steel or aluminum connectors.
Project Ideas
Business
RFID-Enabled Inspection & Compliance Service
Offer a subscription where you tag/register each lanyard’s QR/RFID, perform scheduled ANSI/OSHA inspections, document results with photos, and auto-generate audit-ready reports and reminders. Include impact-indicator checks and immediate removal-from-service workflows.
Fall Protection Kit Rental & Exchange
Provide job-ready kits (harness + single/twin-leg lanyards + anchors) that are pre-inspected, cleaned, and tracked via RFID. Offer weekly/monthly rentals with swap-outs for damaged or post-fall gear, plus cleaning and storage between jobs. Ideal for contractors who need compliant gear without high upfront cost.
On-Site Training and Fit/Use Consulting
Deliver mobile toolbox talks and hands-on training covering selection (single vs. twin leg, connector choices), proper tie-off, inspection steps, and incident response. Use your demo board/pod for safe visualization. Provide certificates, digital checklists, and site-specific compliance plans.
E‑Commerce Bundles with Asset Onboarding
Sell curated lanyard bundles (steel vs. aluminum connectors, trade-specific kits for roofing/steel erection) and include free asset registration, QR/RFID configuration, and a starter inspection log. Upsell storage lockers, connector guards, and annual inspection packages at checkout.
Post-Fall Incident Response & Replacement + Recycling
Offer rapid response after an incident: quarantine and document the affected lanyard (impact indicator deployed), issue a compliant replacement, and produce a report for OSHA/insurance. Provide an eco-conscious retirement program that responsibly recycles metal hardware and textiles and issues credit toward new gear.
Creative
Wall-Mounted Lanyard Storage & Drying Locker
Build a ventilated cabinet with slotted hangers that keep the elastic lanyard relaxed (4–6 ft range accommodated), a drip tray for post-cleaning dry-down, UV-shielded doors, and a clear window to keep label packs visible. Add a small desiccant compartment and a mount for a QR/RFID reader so gear can be scanned in/out. Keeps webbing clean, dry, and organized for faster inspections.
Pass/Fail Inspection Training Board
Create a classroom board showing good vs. out-of-service examples: intact webbing and connectors next to frayed webbing, a deployed impact indicator, and a bent gate (use retired/damaged samples or photos). Include a mirror for throat/gate checks, a feeler gauge area for hook latch function, and QR links to ANSI/OSHA checklists. Great for onboarding and refresher toolbox talks.
Energy Absorber Demo Pod (Non-load-bearing)
Build a clear acrylic display pod housing a cutaway or retired energy absorber to illustrate how deployment works and what the impact indicator looks like when triggered. Incorporate flip-up placards explaining maximum arrest forces and removal-from-service rules. Label clearly: “For demonstration only—do not use for fall arrest.”
Connector Guards and Cart Hanger
Design and 3D-print snap-hook tip guards and a rolling-cart hanger that prevents steel hooks from striking surfaces during transport and storage. The hanger keeps hooks separated to reduce tangles and protects the protected label pack. Bright color options help with visual management. Guards are removed before use and never modify load-bearing parts.
Inspection Kiosk with QR/RFID App
Build a compact kiosk from plywood/steel tube with a tablet mount, barcode/QR scanner or NFC/RFID reader, and a small label printer. Pair it with a no-code app to log inspections, capture photos, and timestamp pass/fail results by serial/UPC. Exports compliance reports for ANSI Z359.13/OSHA audits.