Features
- Carbide split-point tip to reduce bit walking and improve initial penetration
- Aggressive flute angles to help clear chips and increase drilling speed
- No-spin (non-slip) shank to reduce bit slippage in the chuck
Specifications
| Number Of Pieces | 1 |
| Product Length [In] | 4-1/2 |
| Product Diameter [In] | 1/8 |
| Product Pack Quantity | 1 |
| Number Of Pieces | 1 |
| Product Length [In] | 5-1/4 |
| Product Diameter [In] | 5/16 |
| Product Pack Quantity | 1 |
Related Tools
Related Articles
Multi-material drill bit with a carbide split-point tip and aggressive flute geometry to improve cutting and chip evacuation across a variety of materials. The shank is designed to reduce slippage during use.
Project Ideas
Business
On-Tile Accessory Installation
Offer a niche service installing towel bars, hooks, shelves, and bidet sprayers on ceramic or porcelain tile. The carbide split-point enables accurate, crack-free holes on glossy surfaces; use 1/8" pilots and step up to 5/16" for anchors to deliver clean, warrantied installs.
Mixed-Material Signage Shop
Produce layered wood/metal/acrylic signage with hidden standoffs and LED accents. The multi-material bit speeds production by drilling pilot holes across substrates without tool changes, improving throughput on custom orders.
Mobile Anchor & Mounting Service
Serve homeowners and property managers by quickly adding anchors for blinds, safety latches, and fixtures in drywall, masonry, and metal studs. The no-spin shank and fast chip evacuation reduce downtime on repetitive pilot holes, boosting job profitability.
Upcycled Luminary Product Line
Create and sell perforated tin can lanterns, metal jar sleeves, and acrylic light panels at markets or online. Consistent, clean 1/8" patterns are easy to batch-produce thanks to the bit’s stable start and rapid chip clearing.
Low-Voltage Cable Routing & Sensor Installs
Install door sensors, cameras, thermostats, and cable pass-throughs across diverse surfaces. Use 1/8" pilots to prevent fastener wandering on laminate, tile, or metal, then step up as required; a neat, damage-free result differentiates your service.
Creative
Mosaic Tile Hook Rail
Add a decorative hook rail to a kitchen or bath backsplash by drilling precise 1/8" pilot holes directly through ceramic tile into the substrate for anchors. The carbide split-point keeps the bit from walking on glossy glaze, and a slow, water-cooled pass prevents chipping; upsize to 5/16" where larger anchors are needed.
Driftwood & Metal Wind Chimes
Combine driftwood, thin metal spoons, and small ceramic shards by drilling clean 1/8" holes in each material for jump rings or wire. The multi-material bit handles the mixed media without bit changes, and the aggressive flutes clear chips to keep holes crisp.
Upcycled Tin Planter Wall
Turn tea tins and food cans into a vertical herb garden. Drill drainage holes in the bottoms and mounting holes on the backs; the non-slip shank prevents chuck spin as you move from thin steel to wood backing boards, making repeat drilling fast and consistent.
Constellation Lanterns
Perforate tin cans or thin sheet metal with 1/8" holes in star patterns to create shimmering lanterns. The split-point tip reduces skating on metal, while the aggressive flutes eject chips to avoid heat buildup and burrs.
Acrylic Star Map Lightbox
Drill a field of tiny holes into an acrylic panel to map constellations, then backlight with LEDs. The bit’s geometry minimizes melting and wandering, producing clean, pinpoint apertures for crisp light transmission.