Easywave Wood Stove Fan, Magnetic Pipe Fireplace Fan, Heat Powered Fireplace Fan Non Electric, Thermal Fan for Wood/Log Burning Stove Pellet/Gas Burner, Silent Motor, W/Stove Accessories Thermometer

Why I added a pipe-mounted fan to my stove

The first time I clipped the Easywave stove pipe fan onto my 6-inch flue, I didn’t expect it to make such a difference in how the room warmed up. I’ve used stovetop fans for years and like them, but they crowd the cooking surface and only start moving real air once the stove body itself is particularly hot. This fan’s pipe-mounted approach changes the equation in a useful way: the flue warms early and stays hot longer, and the fan takes advantage of that without needing electricity, wires, or switches.

What it is and how it works

This is a heat-powered (thermoelectric) fan designed to mount on your chimney pipe, not the stove top. A small thermal module converts the temperature difference on the base into electricity, which runs a very quiet motor. The unit is all aluminum, rated to operate best between 200–320°C (392–610°F), and it has over-temperature protection at 343°C (650°F) to protect the motor. The manufacturer quotes 180 CFM at under 25 dB. In practice, it’s a gentle, steady airstream rather than a hard “blast,” which is exactly what you want for even heat distribution.

It attaches with two methods: a curved magnetic base that matches common flue diameters (120–150 mm, or roughly 5–6 inches) and a universal strap for non-magnetic or slick pipes. That dual-mount design is smart and, in my experience, necessary for some installations.

Setup: five-minute install, with one caveat

• Placement: Best results came with the fan mounted about 8–16 inches (20–40 cm) above the stovetop, pointed toward the part of the room that tends to run cold. The spec calls for 20–50 cm above the top; I found the lower half of that range most effective without cooking the fan.

• Attachment: On matte black steel pipe, the curved magnets were plenty strong and the fan felt secure. On enamel or some stainless pipes, magnets can slip—use the included strap. Once strapped, it’s rock-solid and you can forget about it.

• Clearance: Make sure the blades have room and that the fan body isn’t touching seams or elbows. I also like to leave a small air gap behind the base so cooler room air can reach the thermoelectric module; that helps startup and keeps the module happy.

• Thermometer: The included magnetic stovepipe thermometer is genuinely useful. Stick it a few inches above the fan and you’ll have a good sense of when you’re in the fan’s sweet spot (and whether your flue is running too cool or too hot for clean, efficient burning).

Total setup time was five minutes including attaching the strap.

Performance: even heat, less stratification

In my 450-square-foot living room with an older cast-iron wood stove, the Easywave reduced the “hot by the stove, cool on the sofa” gradient noticeably. I could feel a gentle airstream from across the room—enough to move a hanging tag and carry warmth, not enough to feel drafty. The biggest change was at floor level; temperatures were more uniform from ankles to head, meaning the whole space felt comfortable at a slightly lower stove output.

Two other situations where it stood out:

• Shoulder-season burns: Because the flue heats quickly, the fan begins turning earlier than stovetop models. Even with a modest fire, it helped distribute warmth before the stove body was fully up to temperature.

• Cycling gas stove: On a gas stove that modulates and cycles, the fan kept moving heat during burner off-cycles by using the flue’s residual heat. That smoothed out room temperature swings.

This is not a blower, and it won’t push heat into far bedrooms, but as a room-level solution it does what you want: reduces hotspots and gets more of the stove’s heat into the living area.

Noise and vibration

At typical operating temperatures, it’s functionally silent. Up close, I can hear a faint whisper of air if the room is very quiet. No motor hum, no bearing chatter. Balancing is good; I didn’t notice vibration transmitted to the pipe when mounted securely. If you hear anything, check the strap tension and blade clearance.

Heat range and safety behavior

The fan starts spinning once the flue warms up and really comes into its own around the mid-range of a normal burn. With the included thermometer, I tried to keep the flue in the 200–320°C band where the fan moved the most air. On one deliberately hot burn, airflow reduced as it approached the cutoff, which is exactly what you want. My advice:

• Use the thermometer to avoid overfiring your stove and to stay in the fan’s optimal range.
• Don’t mount this where the base routinely exceeds the rated temperatures (e.g., right above a cooktop plate with no flue gap).
• Remember the whole assembly gets very hot—treat it like part of the stove. Gloves only.

Build quality and design

The unit feels sturdier than typical budget stovetop fans. The aluminum blades are rigid, the finish is consistent, and the curved base makes pipe placement obvious. The magnets are appropriately sized for ferrous pipe, and the universal strap is not an afterthought—it’s the right answer for smooth, coated, or stainless flues. The fan’s compact footprint looks clean on the pipe and keeps your stovetop free for kettles and skillets.

Maintenance is minimal: dust the blades occasionally and give it a visual check at the start of the season. There’s no cord to fray and no consumables to replace.

What it won’t do

• Replace a furnace blower: Airflow is purposeful but gentle. It’s for improving circulation near the stove, not for ducted distribution or pushing heat down a long hallway.

• Fix poor stove placement: If the stove is tucked behind a wall or in a tight alcove, airflow remains limited by the room layout.

• Work miracles on insulated double-wall: If your exterior stovepipe stays relatively cool to the touch, the fan has less temperature differential to work with. It will still run if mounted where the pipe gets warm enough, but expect a smaller effect.

• Stick to every pipe: Magnets don’t bite on some stainless or enamel. Use the strap and you’re fine.

Who it’s for

• Wood and pellet stove users who want more even heat without giving up cooktop space.
• Gas or oil stove owners with a hot flue who want to smooth temperature swings as the burner cycles.
• Off-grid setups, cabins, and wall tents, where silent, power-free circulation is especially valuable.

If you already own a stovetop fan and wish it would start earlier in the burn or you’re tired of moving it to make room for a pot, a pipe-mounted fan like this is a smart complement—or a straight upgrade.

Tips for best results

• Aim the airflow where people sit, not at walls.
• Mount in the lower half of the recommended height range above the stove top for stronger drive temperatures.
• Use the strap on any slick pipe; don’t rely on marginal magnet grip.
• Keep the blades clean; dust reduces airflow.
• Watch the thermometer: the fan’s sweet spot aligns with cleaner combustion and better overall stove efficiency.

The bottom line

The Easywave stove pipe fan does exactly what a good heat-powered fan should: it quietly turns wasted flue heat into usable room comfort, no cords or switches required. Compared with stovetop fans, it frees up cooking space and tends to kick in earlier and persist longer as the flue warms and cools. Build quality is solid, installation is simple, and the included strap and magnetic thermometer round out the package in a practical way.

It’s not a substitute for a powered blower and it won’t fix challenging floor plans, and on enamel or stainless pipe you’ll want to use the strap from the start. Within those bounds, it’s a capable, low-maintenance tool that improves comfort in the spaces where you actually sit and read, cook, or gather.

Recommendation: I recommend the Easywave pipe fan for anyone running a wood, pellet, gas, or oil stove with an accessible flue. The combination of silent operation, effective heat leveling, early startup on the flue, and a secure mounting system makes it an easy upgrade for real-world comfort—especially if you value a clear stovetop and prefer solutions that don’t rely on electricity.