Features
- Up to 11 tons output force
- Punch range 1/2"–2" (split slugs for easier removal)
- Punches up to 10 gauge mild steel and 12 gauge stainless steel
- Threadless draw stud connection to set up punch and die without supporting the tool weight
- Inline body with 180° rotatable head for increased clearance
- Detent head to hold punch/die assembly before, during, and after punch completion
- Embedded magnets in dies for punch alignment
- Bright LED lights to illuminate the work area
- Shoulder strap and connection ring for portability
- Chip pocket accepts Tool Connect™ chip for asset management
- Compatible with DEWALT 20V MAX system and with 1/2"–6" knockout punches/dies (5" and 6" sold separately)
- Crimp Connect® software compatibility
Specifications
Output Force | Up to 11 tons |
Punch Range | 1/2" – 2" (split slugs) |
Material Capacity | Up to 10 gauge mild steel; up to 12 gauge stainless steel |
Included Punches And Dies | 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" (punches and dies included) |
Battery | DCB203 2.0 Ah Li‑ion (included) |
Charger | Included |
Case | TOUGHSYSTEM 2.0 case (included) |
Draw Studs Included | 7/16" draw stud (DCE600DS716), 3/4" draw stud (DCE600DS34) |
Accessories Included | Shoulder strap, USB‑C cable, Tool Connect chip (listed in kit contents) |
Compatibility | DEWALT 20V MAX system; compatible with DEWALT 1/2"–6" knockout punches/dies (5" and 6" sold separately) |
Work Light | Bright LED ring/light to illuminate work area |
Head Design | Inline body with 180° rotatable head |
Retention | Detent head secures system in place before, during, and after punch |
Warranty | 3 Year Limited Warranty; 1 Year Free Service; 90 Days Satisfaction Guaranteed |
Manufacture | Made in USA with global materials (tool only) |
Related Tools
Related Articles
Hydraulic knockout tool kit for creating knockout holes from 1/2" to 2". The tool produces up to 11 tons of force, uses the 20V MAX battery system, and has an inline body with a 180° rotatable head for access in tight spaces. Dies include embedded magnets for alignment and the threadless draw stud allows punch/die setup without supporting the tool's weight. The kit includes punches, dies, draw studs, a battery and charger, and a TOUGHSYSTEM 2.0 case.
Project Ideas
Business
Mobile Knockout Service for Electricians
Offer on-site panel/enclosure hole punching for conduit entries (1/2"–2"). Ideal for tight mechanical rooms where the 180° rotatable head shines. Charge per hole or per visit, provide rapid turnaround for ECs, and upsell layout/labeling. Promote reduced job time and cleaner holes vs. step-bits.
Custom Control Panels for Vans, Boats, and Food Trucks
Produce and ship pre-punched aluminum/stainless panels for builders and upfitters. Provide online templates with common hole sizes, powder coat options, and engraving. The threadless draw stud and magnetic dies speed batch runs, improving margins on standardized SKUs.
Solar/EV Balance-of-System Pre-Punching
Partner with solar and EV charger installers to pre-punch combiner boxes, battery cabinets, and meter/main enclosures for conduit knockouts. Offer quick local pickup/delivery, code-compliant hole sizing, and consistent placement using jigs. Bill per panel or per project bundle.
BBQ/Smoker and Fire Pit Mod Service
Provide precision airflow and accessory hole mods on customer smokers, drums, and fire pits. Offer standardized patterns (1/2"–1-1/4") with templates, plus add-ons like grommets and dampers. Market to backyard BBQ communities and caterers; price per pattern plus accessories.
Stainless Bar/Restaurant Fabrication Add-On
Add a hole-punching service for bars and kitchens: drip trays, splash guards, and pass-throughs for faucets and drains (1"–2"). The cordless tool allows clean work in finished spaces without hauling panels off-site. Package services with polishing and edge finishing for premium pricing.
Creative
Perforated Lanterns and Sconces
Create modern lanterns or wall sconces from 10–12 ga sheet steel or stainless. Use 1/2"–1" punches to form dot patterns and larger 1-1/2"–2" holes for wiring access. The rotatable head lets you punch close to bends and edges, and the embedded magnets help keep repeatable spacing with a simple jig.
Gradient Wall Art or Room Divider
Design a steel panel with a gradient of hole sizes (1/2", 3/4", 1", 1-1/4", 1-1/2", 2") to create a fade effect. Backlight with LEDs to highlight the pattern. The inline body and 180° head help reach tight corners, and the threadless draw stud speeds up repetitive punching.
Custom Fire Pit Airflow Pattern
Build a square or round fire pit from 10 ga mild steel and punch clean, evenly spaced intake and secondary burn holes for improved airflow. Use 1/2"–3/4" for lower vents and 1"–1-1/4" for rim jets. The tool’s 11 tons of force ensures clean holes in thicker material.
Van/Boat Switch and Gauge Panels
Fabricate aluminum or stainless control panels with precise round holes for toggles, pushbuttons, USB charge ports, and gauges. Use 3/4", 1", and 1-1/4" dies for most accessories, plus 2" for large meters. LED worklight and magnetic dies make accurate layouts easy even in dim vans/engine bays.
Planters, Drip Trays, and Garden Hardware
Convert stock tanks, buckets, or sheet-metal planters with clean drainage and grommet holes. Punch 1/2"–1" drains and 1-1/4"–2" pass-throughs for bulkhead fittings or irrigation. The detent head holds assemblies securely while positioning on curved or awkward surfaces.