Combination-Flush and Bevel-Trimmer Bits

Features

  • Micrograin construction to combine bevel and flush trimming in one bit
  • Intended for use with laminate trimmers or routers
  • Requires an edge guide, bearing guide, or fence for guided cuts
  • Bits must be inserted to full collet depth

Specifications

Angle 23°
Type Of Cut Flush or 22° bevel
Construction Carbide tipped
Model Number 85261M
Overall Length 1-3/4"
Shank Diameter 1/4"
Overall Diameter 1/2"
Cutting Edge Length 1/2"
Angle 10°
Type Of Cut Flush or 10° bevel
Construction Solid carbide
Model Number 85288
Overall Length 1-1/2"
Shank Diameter 1/4"
Overall Diameter 3/8"
Cutting Edge Length 3/8"

Micrograin router bits that provide either a flush-trim or bevel-trim cut in a single cutter. Intended for use with a router or laminate trimmer and a guide assembly; bits must be inserted fully into the collet. Use only bits and accessories that are compatible with your router.

Model Number: 85261M

Project Ideas

Business

On-Site Laminate Trimming Service

Offer mobile trimming for countertops, cabinets, and edge-banding: flush-trim HPL and banding for installers, then add a clean 10° bevel to reduce sharp edges and elevate fit and finish.


Template-Based Product Line

Develop repeatable products—coasters, charcuterie boards, wall shelves—using templates. Flush-trim for consistency, then add 10° or 22° bevels as a signature look to sell on Etsy or at markets.


Cabinet Refacing and Veneer Upgrades

Reface existing cabinets by applying veneer and edge-banding; flush-trim for a perfect fit and add a micro-bevel to doors and shelves for a professional, factory-like finish.


Sign Blank Fabrication

Produce custom sign blanks from plywood, MDF, PVC, or ACM panels. Flush-trim to templates for consistent shapes and bevel edges for a polished, dimensional appearance for local sign shops.


Shelf and Furniture Edge Finishing

Partner with small contractors to finish melamine and plywood edges on built-ins and shelves: flush-trim banding and apply a controlled bevel to eliminate sharpness and reduce finishing time.

Creative

Shadow-Line Floating Shelves

Template-route shelf blanks for consistent shapes, flush-trim edge-banding, then add a subtle 10° bevel along the front and bottom edges to create a crisp shadow line and a high-end look.


Beveled Cutting Boards

Glue up interesting end-grain or mixed-wood patterns, flush-trim with a template for repeatable shapes, and add a comfort 10° or bold 22° bevel around the perimeter for a refined finish.


Geometric Wall Art Panels

Laminated veneer or plywood panels are flush-trimmed to jigs with organic or polygonal shapes, then a 10° bevel is added around the perimeter to create depth and shadow for gallery-style wall art.


Modern Record Crate

Build a stackable LP crate using template-routed sides and dividers; flush-trim joinery and add a 22° bevel on the top edges for a sleek, mid-century vibe that’s easy to carry.


Faceted Tea-Light Holders

Turn small blocks to size, use the flush trim for consistent footprint, then chamfer faces at 10° or 22° to create faceted edges that catch light, producing minimalist candle accents.