Skil Portable Jobsite Worm Drive Table Saw Stand

Why I Reached for This Stand

I spend a lot of time moving between garage, driveway, and jobsite, so I prize a stand that sets up in seconds and doesn’t fight me in transport. The Skil stand checks those boxes. It’s a compact, 14-pound, all-steel platform built specifically to carry Skil’s 10-inch worm drive table saws. That specificity is both its secret sauce and its biggest constraint, but more on that in a moment.

Setup and Compatibility

Out of the box, setup is straightforward: unfold the legs, set the stand on the ground, and latch the saw in place. The tool-less latches are the highlight for me. They engage the saw’s feet positively, and you get an unmistakable “locked-in” feel. With compatible models (Skil’s SPT70WT series), alignment is essentially foolproof. There’s no fumbling with bolts or hunting for a socket—snap in, check the locks, and you’re cutting.

Compatibility is intentionally narrow. It’s designed for specific 10-inch worm drive models, and that tight fit is why the latching system feels so secure. I also tried using the stand with a different compact saw by adding a plywood adapter plate. A simple 3/4-inch sheet cut to footprint size, with feet positioned to nest into the stand’s recesses, plus a few toggle clamps to capture the saw’s base, gave me a stable, repeatable connection. It’s not plug-and-play, but if you’re comfortable fabricating a plate, the stand becomes more versatile than the spec sheet suggests. Still, if you don’t want to tinker, stick with the intended saws.

Portability and Storage

At 14 pounds, this thing is legitimately easy to carry one-handed. The square 34.5-by-34.5-inch footprint makes it stable when open but compact enough when folded to slide against a wall or into a truck bed without hogging space. It’s not a wheeled cart; you carry it, and your saw is a separate carry unless you keep them latched and lift together. I prefer keeping them separate—two lighter trips beat one awkward lift—but if you do lift them together, the stand’s all-steel frame doesn’t flinch. The 150-pound weight rating is generous for the saw plus typical jobsite loads resting on the table.

The fold mechanism is confidence-inspiring. No elaborate choreography—fold, stow, done. In a cramped garage, the small folded profile is a quiet advantage you appreciate over time.

Stability and Leveling

Stability is where the Skil stand earns its keep. With the legs spread and the saw latched, the setup feels planted. The square footprint helps resist racking when pushing through dense stock, and the steel legs do a good job of deadening vibration from the worm drive motor. On less-than-perfect surfaces (worn slab, pavers, packed dirt), the built-in leveling adjustments let you take the wobble out. It’s an underappreciated feature that saves you from shimming with scraps.

I ran a series of rips through plywood and 2-by material to test torsional stiffness—a common weak point on lightweight stands. No noticeable sway or “trampoline” effect at the front rail, and the fence stayed accurate throughout. For a 14-pound frame, that’s impressive.

If you routinely rip long, heavy stock without outfeed support, remember: this is a stand, not a cart with extensions. It holds the saw solidly, but it’s not a substitute for a dedicated outfeed or roller support. Pair it with proper support and you’ll be happier and safer.

Ergonomics and Working Height

The stand height is 23.9 inches. With a compact 10-inch saw on top, working height lands in the mid-30-inch range, depending on your saw’s base. For my frame (5'10"), that’s comfortable for most ripping and crosscutting. I can keep shoulders relaxed, and the push-through feels natural.

Two caveats. First, the height is fixed. There are leveling adjustments for uneven ground, but no true height adjustment. If you prefer a taller or shorter setup, you’re out of luck without modifying your workflow. Second, if you’re planning to mount the stand on a mobile dolly or another platform, expect the combined height to creep into less comfortable territory. On a dolly, the saw’s table can end up feeling a touch high for prolonged work. My solution was to skip the dolly and let the stand do its job on its own—lighter, simpler, and ergonomically better.

Build Quality and Durability

The “all-steel” tag isn’t marketing fluff. The tube sections and hinges feel stout, and the stand shrugs off the inevitable bumps from loading and unloading. After several trips in and out of the truck, the frame shows the usual scuffs, but no play developed in the joints and no leg wiggle. The latches, being tool-less, are the moving parts I watch closest; they’ve stayed tight, and they engage cleanly without needing excessive force.

At 150 pounds of rated capacity, you’re well within limits with a worm drive benchtop saw and some incidental workpiece weight. I wouldn’t treat it like a general-purpose scaffold, but for its intended role it’s comfortably overbuilt.

Daily Use: The Good and the Gripes

What I like:
- Speed. From folded to cutting in under a minute, including latching the saw.
- Security. The latch system holds the saw more tightly than bolt-through universal brackets I’ve used on other stands.
- Weight-to-rigidity ratio. It’s rare to get this level of stability at 14 pounds.
- Leveling on rough ground. Takes the frustration out of uneven setups.

What I’d change:
- Height adjustability. Even a couple inches of telescoping range would widen its appeal and help fit different users and setups.
- Universal adaptability. While I appreciate the precise fit for Skil saws, a supplemental universal bracket option from the factory would be welcome for folks running a mixed fleet.

Practical Tips

• If you use compatible Skil saws, mark the ideal foot placement on the stand so alignment becomes muscle-memory fast.
• For non-compatible saws, build a plywood adapter plate with feet or cleats that nest the stand’s recesses, and add toggle clamps to secure the saw. Keep the plate as thin as possible to avoid raising working height.
• Periodically check latch tension and leg hardware. Lightweight stands live and die by tight joints.
• On slick concrete, consider non-marring pads under the feet to resist sliding when you’re pushing heavy material.

Who It’s For

This stand is tailored for tradespeople and serious DIYers who value fast deployment and solid footing without the bulk of a wheeled cart. If you’re already running Skil’s 10-inch worm drive table saws, the synergy is excellent. If you need integrated wheels, on-board storage, or adjustable height, you’re looking at a different class of product—and a different weight class.

The Bottom Line

The Skil stand is a purpose-built, no-drama platform that nails the fundamentals: quick setup, strong attachment, stable stance, and easy transport. Its fixed height and brand-specific latch geometry set some boundaries, but within those boundaries it performs exceptionally well. I kept reaching for it because it does exactly what I need in a compact, jobsite-friendly package and never got in my way.

Recommendation: I recommend this stand if you’re running a compatible Skil 10-inch worm drive table saw and want a lightweight, sturdy, and fast setup. It’s especially good for mobile work where you’re folding and unfolding multiple times a day. If adjustable working height, integrated wheels, or broad cross-brand compatibility are must-haves for you, consider a universal wheeled cart instead.