DeWalt Concrete Anchor Strap - Web Loop on Both Ends - 6 ft.

Concrete Anchor Strap - Web Loop on Both Ends - 6 ft.

Features

  • Polyester webbing resists wear, oil, dust, and water
  • Can be used as a temporary vertical or horizontal anchor point when properly embedded
  • Designed to be choked to rebar and embedded in poured concrete and removed after construction
  • Economical option to provide multiple temporary anchor points during construction

Specifications

Length 6 ft (1.8 m)
Webbing Width 1.75 in (44 mm)
Wear Pad Width 2 in (50 mm) polyester wear pad
Material Repellent polyester webbing
Working Load / Capacity 310 lb (140 kg)
Minimum Breaking Strength 5,000 lb (23 kN)
Weight 0.57 lb (260 g) (manufacturer listing)
Certifications ANSI Z359.18-2017; OSHA 1926.502; OSHA 1910.140
Warranty 2 Year Limited Warranty
Model / Sku (Manufacturer) DXFP813006
Upc 0810091651858

A 6 ft web anchor strap with loops on both ends intended for temporary fall-protection anchorage. It is designed to be wrapped (choked) to rebar or other structural members and embedded in poured concrete, then cut off when construction is complete. Can be installed for vertical or horizontal anchorage around beams, posts, or similar members.

Model Number: DXFP813006

Project Ideas

Business

Pre-Pour Anchor Planning & Supply

Offer a service that maps temporary anchor locations for pours, bundles and labels straps by sequence/zone, and provides documentation packets (specs, certifications, and inspection checklists). Installation and use are performed by the contractor’s qualified person per ANSI/OSHA; you focus on planning, kitting, and traceability.


Branded QR-Tracked Straps

Private-label straps with company logos and sewn-in QR codes that link to a simple digital record (delivery date, lot, inspection logs, pour number). Sell the straps plus a lightweight SaaS for compliance tracking and photo documentation.


Onsite Toolbox Talks & Micro-Training

Provide 60–90 minute, crew-side sessions covering anchor selection, inspection, documentation, and post-pour cut-off best practices using demo props. Package with take-home checklists and discount codes for replenishment orders. Emphasize adherence to manufacturer instructions and standards.


Waste-to-Wares Upcycling Program

Partner with GCs to collect cut-off strap tails and convert them into non-load consumer items (key fobs, lanyards, badge holders) with clear “NOT PPE” labels. Sell as corporate swag or donate proceeds to safety charities, helping firms hit sustainability goals.


Replenishment Subscription for Crews

A subscription service that delivers job-ready bundles of straps, inspection tags, and wear protection sleeves on a cadence aligned to pour schedules. Include jobsite bins and swap-outs to keep consumables stocked and labeled without last-minute runs.

Creative

Apprentice Tie-Off Demo Block

Create a tabletop training prop by embedding the loop of a strap into a small practice concrete block with a short length of rebar, so apprentices can learn anchor identification, inspection tags, and post-pour cut-off procedures. Use strictly for demonstration at ground level—no live tie-in; always reference ANSI Z359.18/OSHA guidance.


High-Visibility Anchor Tagging Kit

Design bright slip-on sleeves and tag sets for the loops with zone color-coding, “Do Not Remove” messaging, and QR codes that link to an anchor map or JHA. This improves jobsite communication and reduces accidental removal without altering how the strap is used.


Toolbox Talk Prop Set

Assemble a portable show-and-tell kit with a new strap, a sample of rebar, and laminated cards showing good vs. rejected conditions. Use it to run 10-minute safety huddles that reinforce correct choke orientation, edge protection concepts, and inspection points—no installation instruction beyond manufacturer guidance.


Upcycled Offcut Key Fobs

Collect the cut-off tails of retired straps (never for load-bearing use) and turn them into branded key fobs or bag tabs with a laser-etched metal tag reading “NOT PPE.” A practical craft that promotes safety awareness and reduces waste.


Inspection Reference Board

Build a wall-mounted board that displays a new strap next to worn/damaged examples (frayed webbing, contaminated fibers, unreadable labels) under clear acrylic. It becomes a visual standard at the gang box and supports consistent pre-use checks.