DeWalt 2 in x 27 ft Heavy-Duty Ratchet Tie-Down Strap

2 in x 27 ft Heavy-Duty Ratchet Tie-Down Strap

Features

  • Weather-resistant metal ratchet components
  • UV- and weather-resistant polyester strap
  • 2 in wide x 27 ft long
  • Non-mar, coated double J hooks
  • Ergonomic ratchet handle
  • Armored caps to protect hardware
  • Lab-tested 3,333 lb safe working strength
  • Lab-tested 10,000 lb break strength
  • Includes one ratchet strap

Specifications

Width 2 in
Length 27 ft
Break Strength 10,000 lb
Safe Working (Wll) 3,333 lb
Hook Type Coated double J hooks (non-mar)
Strap Material Polyester (UV and weather resistant)
Ratchet Material Weather-resistant metal
Included Items 1 ratchet strap
Warranty 1 Year Limited Warranty

Ratchet tie-down strap designed to secure cargo. It uses a metal ratchet mechanism with polyester webbing and double J hooks. The strap is tested for break and working strengths and includes protective features to reduce contact damage to loads.

Model Number: DXBC10000J

DeWalt 2 in x 27 ft Heavy-Duty Ratchet Tie-Down Strap Review

4.4 out of 5

What stood out in use

I put the DeWalt 2x27 ratchet strap to work over several weeks moving a riding mower, a pallet of pavers, and a mixed load of lumber and pipe. The combination of a full 27 feet of webbing and a 2-inch width immediately changes what you can reasonably tie down with one strap. Spans that usually force you to daisy-chain smaller straps were a non-issue; I could run a single continuous line from rub rail to rub rail on a flatbed or across a pickup bed with a tall load and still have tail left to thread.

The high-visibility yellow polyester is more than a brand choice—it’s practical. On busy jobsites and dawn departures, I could see where the strap was routed at a glance, which helped with quick checks and avoided accidental twists. The webbing itself feels dense, with a tight weave that resists fuzzing when dragged over surfaces. The 2-inch width spreads load nicely, which matters when you’re cinching against painted equipment or softer woods.

Build and design

The ratchet assembly is properly heavy, with weather-resistant metal throughout and “armored” end caps that shield the pawls and gears from incidental knocks and grime. That shielding is useful; road grit is the nemesis of smooth ratchets. The handle is a highlight—large, padded, and easy to grip even in winter gloves. DeWalt sized the handle so you can put real leverage into the mechanism without chewing up your hands.

Hardware ends terminate in coated double J-hooks. The coating helps prevent marring on painted D-rings and rails, and the J shape is versatile for trailer stake pockets, rub rails, and truck bed loops. The hooks are on the large side; they feel stout and inspire confidence when loaded, but they won’t fit every small or recessed anchor point on passenger vehicles.

All of the contact edges on the ratchet are cleanly finished; I didn’t see burrs that could abrade the strap. The stitching around the hooks is multi-row and consistent. The tag is sewn in clearly with the safe working load and break strength.

Setup and everyday usability

There’s a simple truth with big ratchet straps: they’re only as friendly as the threading and release. Threading this one is straightforward. My routine:

  • Close the ratchet so the two plates are parallel.
  • Feed the strap tail through the slot in the mandrel from the back side.
  • Pull the slack through by hand until the webbing is snug around the load.
  • Ratchet to tension, keeping the strap flat and aligned on the mandrel.

Pre-tensioning by hand matters; you want just a couple wraps on the mandrel to leave room for micro-adjustments. Once loaded, the ratchet action provides good mechanical advantage. The pawl engagement is positive and audible. Out of the box, the mechanism felt a bit dry and slightly gritty. A light shot of dry lube (not oil that attracts dust) improved the feel without making a mess.

Releasing under load is a two-step motion: fully open the handle to disengage the pawl and press the smaller release lever to let the mandrel freewheel. That smaller spring-loaded lever does its job, but it’s also the component I’ll be keeping an eye on over time; small springs are a wear item on any ratchet. If the strap is highly tensioned, I like to lift the load slightly (or relieve a touch of tension by shifting the load by hand) before trying to freewheel—it keeps the release smooth and avoids sudden whip.

Performance and load security

Ratings are clearly printed: 3,333 lb safe working load (WLL) and 10,000 lb break strength. Those numbers put it firmly in the heavy-duty category. On my trailer, two of these easily stabilized a zero-turn mower—one forward, one aft—combined with chocks, keeping it planted over bumpy county roads. For construction materials, a single strap across stacked dimensional lumber held firm without crushing the top course, thanks to the wider webbing.

The strap maintained tension well through temperature swings and vibration. I always stop after the first 10–15 minutes of highway driving to recheck, and I rarely needed more than a click or two to retighten. UV resistance is claimed for the webbing; while I won’t leave any strap baking on a trailer long-term, this one shrugged off a week of sun and rain without stiffening.

One note on edge protection: like any polyester strap, it’s vulnerable to sharp corners. When I ran over angle iron and pallet corners, I used plastic corner protectors or a short sacrificial sleeve to prevent abrasion. The strap emerged with no cuts and only minor scuffs.

Hook compatibility and load protection

The coated double J-hooks are strong and kinder to finished surfaces than bare steel. On a steel deck trailer with D-rings, they seat perfectly. On a pickup with smaller tie-down loops, I sometimes had to rotate the hook to find the geometry that fit. For cargo rails with small slots, a flat-hook style would fit better, so consider your anchor points before committing.

The non-mar coating and 2-inch width mean I can strap appliances and painted cabinets without immediately reaching for blankets. For furniture or fragile items, the sheer leverage you can generate with a 2-inch ratchet is a double-edged sword: it’s easy to overtighten and cause damage. This is a heavy-duty strap—use lighter cam straps for delicate loads.

Safety, care, and maintenance

  • Never exceed the 3,333 lb WLL, and don’t use any webbing with cuts, broken stitches, or melted fibers.
  • Not for overhead lifting.
  • Use at least two straps for powered equipment and cross-strap where possible to prevent lateral movement.
  • Protect against sharp edges with sleeves or corner guards.
  • Keep the ratchet mechanism clean. A quick blowout with compressed air and a touch of dry lube keeps the pawl crisp.
  • Store webbing dry and loosely rolled. A simple hook-and-loop keeper or small bag goes a long way. The strap is bulky; it would benefit from an included storage sleeve or case.

The strap carries a one-year limited warranty. The documentation is bare-bones, which gets you going if you’ve used ratchets before, but newcomers would benefit from clearer illustrations and guidance on routing and release.

Durability outlook

After repeated cycles, there’s no fraying at the hook stitching, and the coating on the hooks has only light cosmetic scuffs. The armored caps around the ratchet keep grit off the teeth better than open designs I’ve used. The only long-term concern is the small spring on the release lever; it’s common to the breed, but it’s also the part most prone to corrosion and fatigue. Basic care—don’t leave the ratchet packed with road salt, and store it dry—should keep it working for years.

Value and alternatives

This is a single, heavy-duty strap with premium ratings and a more robust ratchet than budget options. If your needs are occasional light-duty securing, a 1- or 1.5-inch four-pack will be cheaper and more versatile for small loads. If you routinely secure machinery, building materials, generators, or tall, awkward cargo, the extra strength, length, and hand-friendly ratchet justify the price. I’d like to see an included storage solution or a wear sleeve at this price point, but the core hardware earns its keep.

Who it’s for

  • Haulers who need the reach and capacity to tie down large loads on trailers or flatbeds.
  • Homeowners in storm zones who want fewer, stronger straps to secure outdoor items.
  • Pros who work gloved and need a ratchet they can operate without finger gymnastics.

Who should look elsewhere:

  • Drivers with only small, recessed anchor points—check hook fit first.
  • Anyone primarily strapping delicate items; a lighter cam strap is a better match.

Recommendation

I recommend the DeWalt 2x27 ratchet strap for anyone who regularly secures medium to heavy loads and wants a single strap that can span long runs and tension reliably. The standout features—the long, high-visibility 2-inch webbing, comfortable high-leverage handle, coated J-hooks, and protective ratchet caps—translate into easier setup, better load protection, and fewer compromises on anchor placement. The mechanism benefits from a touch of dry lube out of the box, the release lever spring is a component to care for, and storage is bulky without a dedicated case, but those are manageable trade-offs. If your work calls for a dependable, heavy-duty strap with real reach and honest ratings, this one earns a spot in the kit.



Project Ideas

Business

Custom-Branded Tie-Downs

Offer small-batch, logo-printed 2 in x 27 ft straps to local movers, landscapers, contractors, and marinas. Sell online and wholesale, bundle with protective sleeves, and highlight the 3,333 lb WLL and non-mar hooks. Provide bulk discounts and an exchange program for worn straps.


Load Securement Pop-Up Service

Set up at home centers, landfills, and boat ramps to help customers safely secure loads before they hit the road. Demonstrate correct ratcheting, sell straps on-site, and provide quick-fit packages for common loads (appliances, green waste, kayaks).


Event Anchoring and Rentals

Rent and install strap kits to anchor tents, inflatables, banners, and small stage elements. Include site surveys, wind plans, and overnight monitoring. The weather-resistant hardware and high working strength are ideal for repeated outdoor use.


Fleet Strap Management Subscription

For small delivery and trades fleets, provide periodic inspection, labeling, cleaning, and replacement of straps. Maintain compliance records, train drivers on proper use, and offer emergency replacements. Charge a monthly per-vehicle fee.


Retail Tie-Down Concierge

Partner with kayak, bike, and furniture stores to secure customer purchases to vehicles at pick-up. Staff configure tie-down paths, protect contact points, and upsell straps and accessories. Reduces transport damage and adds a new revenue stream.

Creative

Adjustable Garage Lashing Grid

Mount pairs of D-rings or an E-track to wall studs and use the 27 ft strap to create an adjustable grid that secures ladders, lumber, kayaks, and storage bins. The 2 in wide, UV-resistant webbing spreads load, and the non-mar double J hooks protect finishes while the ergonomic ratchet makes quick tensioning easy.


Pallet Bench with Industrial Strap Accents

Build a patio or entryway bench from pallets/2x4s and use the strap as bold, functional bands to compress and hold seat cushions or a backrest in place. Hide the hooks under the frame, ratchet tight for a clean look, and release seasonally for cleaning or cushion swaps.


Overland Tarp Awning Ridgeline

Use the strap as a primary ridgeline between roof rails and a tree/post to tension a tarp awning for camp or tailgates. The weather-resistant components and coated hooks are ideal outdoors, and the ratchet delivers a drum-tight setup that resists wind flap.


Kayak/SUP Carry Sling and Wall Hanger

Wrap the strap around a kayak or SUP to create a cinched carry sling for two people, then reuse it at home to hang the craft on wall studs via the hooks. The 2 in webbing distributes pressure to minimize dents while the armored caps help protect surrounding hardware.


Outdoor Photo/Backdrop Wind Bracing

Stabilize light stands, pop-up backdrops, or signage by ratcheting the strap to ground stakes or weights. The long length reaches distant anchors, and fast tensioning helps keep gear steady in gusty conditions without marring stand legs.