Frocopo Hand Saw Woodworking Tools, 6-Inch Pull Saw, Flexible Double-Edge Blade 17/11 TPI, Japanese Flush Cut for DIY Craft, Non-Slip Wood Handle, Sharp & Lightweight for Woodworking and Garden Trim

What it is and why I picked it up

The Frocopo 6-inch pull saw is a compact, double-edged Japanese-style saw meant for flush cuts, detail work, and tight spots. I grabbed it to keep on my bench for quick trims—think dowels, plugs, trim notches, and the odd bit of PVC or garden cleanup where a large ryoba or a rigid-back dozuki feels like overkill. After several weeks of use across woodworking and around-the-house tasks, it’s become one of those tools I reach for more often than I expected.

Design and build

This is a straightforward, no-frills tool built around a thin SK5 steel blade with two tooth patterns: 11 TPI on one edge for faster cuts and 17 TPI on the other for finer finishes. The blade is flexible enough to lie flat for flush trimming and to sneak into awkward corners, but it’s not a wet noodle—you can guide it with a light touch.

The handle is a light wooden grip with a slightly tacky feel that resists slipping even with sweaty hands. At 2.82 ounces, the whole saw feels almost weightless. The fit-and-finish is utilitarian rather than fancy: the hardware is clean and straight, the handle is smooth, and the blade treatment focuses on function. I wouldn’t call it a showpiece, but nothing about the build got in the way of performance.

Cutting performance

Sharpness out of the box is excellent. The triple-ground teeth bite immediately on the pull stroke, and I rarely needed more than a couple of light starter passes to establish a kerf. Across pine, poplar, and maple, the saw made quick work of small crosscuts and flush trims. The fine side leaves a tidy surface with minimal fuzz; a couple passes with a sanding block finishes it. The coarse side moves faster through thicker stock or soft green wood without feeling grabby.

A few specific use cases stood out:

• Dowels and plugs: The blade lays flat against a surface without scratching it up, and the cut line stays true as long as you let the saw work on the pull. On denser hardwood plugs, the fine edge reduces tearout nicely.
• Trim and casing: For back cuts and on-the-fly notches, the flexibility lets you approach at odd angles. I used it to undercut a bit of baseboard at a threshold and to tweak a miter that was just proud—fast, quiet, and controlled.
• PVC and small garden tasks: The coarse edge chews through 3/4-inch and 1-inch PVC with clean edges. Outdoors, it handled green shoots and small saplings just fine. For thicker or dry hardwood branches, it’s not the right tool, but for small cleanup it’s great.

Because it’s a pull saw, it rewards patience and light pressure. If you muscle it on the push, you’ll feel the blade wander. On the pull, the cut straightens up and the thin kerf tracks where you aim it.

Ergonomics and control

The real surprise is how easy it is to use for extended sessions. The low weight reduces fatigue, and the balance feels neutral—there’s no fight in the stroke. The handle is comfortable for my medium-size hands; the oval shape encourages a relaxed grip that helps maintain a straight pull.

One caveat: folks with larger hands may find the handle a bit short. It’s not a dealbreaker, but if you prefer a full-bodied pistol grip, this will feel compact. On the flip side, the compact handle makes it easy to choke up for delicate cuts and to fit the saw into tight spaces.

Versatility

For a 6-inch blade, it covers a lot of ground:

• Quick crosscuts in small stock and molding
• Flush trimming dowels, tenons, and plugs
• Notching and fitting trim in situ
• Light PVC cutting
• Small garden maintenance (green wood, small stems)

The double-edge design is the hero here. I like switching edges mid-task—rough-in with the coarse teeth, finish with the fine—without reaching for a second tool. It’s also an easy travel and jobsite companion; it slides into a tool roll and replaces two or three specialty saws for light-duty work.

Durability and maintenance

The SK5 blade and hardened, triple-ground teeth have held their edge well through wood and PVC. After several projects and a handful of outdoor cuts, the bite remains aggressive. As with most thin-kerf Japanese saws, technique matters more than brute force; if you avoid binding and keep the stroke light, you’ll extend its sharpness.

Maintenance is simple:
- Keep the teeth clean—resin and PVC dust can pack in. A quick brush and a wipe with an oiled rag keep things moving.
- Store it with a tooth guard or in a sleeve to protect the edge and your hands.
- If you’re flush-cutting on finished surfaces, a layer of painter’s tape under the blade eliminates the risk of micro-scratches.

There’s no spine to go out of square and no hinge to loosen, so the only real wear point is the cutting edge itself. For a small utility saw, that’s a good trade.

Where it falls short

• Size limits: With only 6 inches of blade, long rips or thick stock are tedious. It’s a detail and trim tool, not a general-purpose saw for framing or large joinery.
• Handle size: The compact wooden handle favors precision over palm-filling comfort. If you have large hands, plan on a three-finger grip.
• Flex learning curve: If you’re used to rigid-back saws, the flexibility takes a couple of cuts to master. Apply almost no pressure on the push and let the pull do the work, or you’ll induce a wobble.

None of these are flaws so much as inherent trade-offs of a compact, flexible pull saw.

Alternatives and value

In the small-saw category, you’ll typically choose among:
- A compact ryoba with a longer blade for more stroke length
- A flush-cut saw with zero-set teeth dedicated to trimming
- A dozuki with a spine for joinery and dead-straight cuts

The Frocopo pull saw sits in a sweet spot between those: more versatile than a pure flush-cutter, more flexible and compact than a dozuki, and easier to stash than a full-size ryoba. It’s also easy on the wallet, which matters for a bench-adjacent tool that will see frequent, casual use. Add in the peace of mind of a lifetime warranty from the brand, and the value proposition is strong.

Tips for best results

• Start with two or three light scoring pulls to establish the path, then lengthen your stroke.
• For flush cuts, put a strip of painter’s tape under the blade to protect finished surfaces.
• Switch to the fine edge for the last few passes to minimize cleanup sanding.
• If the cut starts to wander, reduce pressure rather than steering aggressively—let the teeth realign the kerf.
• Wipe the blade with a lightly oiled rag after cutting resinous woods or working outdoors.

Who it’s for

• Woodworkers and DIYers who need a compact saw for trim, dowels, and fixture tweaks
• Makers who want a quick, quiet option for small cuts without setting up power tools
• Gardeners and homeowners who’ll use it for light pruning and PVC repair
• Anyone who prefers a light, low-effort tool that won’t fatigue the hands

If you regularly work with thicker hardwoods, or you need long rip cuts, you’ll be happier with a larger ryoba or a powered solution. But as a companion tool for fine adjustments and clean trims, this one earns its space.

Recommendation

I recommend the Frocopo 6-inch pull saw. It’s sharp, genuinely easy to control, and versatile thanks to its double-edge design. The blade’s flexibility makes flush trimming a breeze, the fine/coarse options simplify task switching, and the featherweight build reduces fatigue. While the compact handle won’t suit everyone and the blade length limits it to small and medium tasks, those trade-offs are inherent to its role. As a bench-side utility saw for woodworking, DIY, and light outdoor use, it offers excellent performance and value.