Features
- 2-1/2" diameter
- Compatible with DWV010 dust extractors
- Intended for cleanup, woodworking, concrete, and drywall applications
- Sold as a single accessory hose (DWV9314)
Specifications
| Diameter | 2-1/2" |
| Compatibility | For DWV010 dust extractors |
| Includes | (1) DWV9314 accessory hose |
| Manufacturer Part # | DWV9314 |
| Upc | 885911388566 |
| Weight | 4.40 lbs |
| Package Quantity | 1 |
| Product Type | Dust extractor accessory hose |
| Applications | Clean-Up, Woodworking, Concrete, Drywall |
Related Articles
2-1/2" diameter accessory hose designed to fit DWV010 dust extractors. Intended for dust collection and clean-up tasks in woodworking, concrete, and drywall work. Sold as a single replacement/accessory hose (DWV9314).
Project Ideas
Business
Dustless Drywall Repair Service
Offer premium patch and paint services marketed as dustless. Use the DWV010 with the DWV9314 hose, pole sander shrouds, and a portable downdraft box for sanding patches. Upsell to homeowners and property managers who want fast turnarounds without mess.
Concrete Drilling Compliance Support
Provide on-site dust control for contractors drilling anchors or cutting chase lines. Bring shrouds, 2-1/2" hose, and document HEPA filtration and flow for OSHA Table 1 compliance. Bill per hole, per hour, or per mobilization with add-ons for cleanup.
Contractor Dust Control Retrofits
Package and install dust collection upgrades for small shops and remodelers: tool-specific adapters, 2-1/2" hose kits, quick-connects, and custom hoods. Include training on setup and filter maintenance. Sell as bundled kits plus installation.
3D-Printed Hose Adapter Shop
Design and sell adapters to mate the 2-1/2" DWV9314 hose to common tool ports (routers, sanders, track saws). Offer a fitment catalog, custom orders, and quick local pickup or shipping. Create multipacks for popular tool ecosystems.
Dust Control Rental Kits
Rent a turnkey dust control kit: DWV010 extractor, DWV9314 hose, floor and crevice tools, and common shrouds. Target DIYers and small contractors needing short-term dust mitigation for hardwood sanding, drywall work, or concrete drilling.
Creative
Cyclone Pre-Separator Cart
Build a rolling cart that pairs your DWV010 with a small cyclone on a 5-gallon or 20-gallon drum. Use the 2-1/2" DWV9314 hose as the main suction line from the cyclone to the extractor, plus a quick-connect port for tools. This keeps HEPA filters cleaner, boosts sustained suction, and makes jobsite cleanup for woodworking, concrete, and drywall much more efficient.
Portable Downdraft Sanding Table
Create a compact downdraft box with a perforated MDF top and internal baffles tuned for a 2-1/2" inlet. Connect the DWV9314 hose to pull fine sanding dust down through the work surface. Add a simple gasketed frame for small parts and a replaceable filter mat under the top to improve airflow and capture.
Miter Saw Dust Hood Retrofit
Build a foldable fabric/ply hood behind your miter saw and route a 2-1/2" pickup at the throat. Connect the DWV9314 hose to a Y that also taps the saw’s rear port (via an adapter). The hood captures overspray while the direct port grabs the plume at the blade, dramatically reducing airborne dust.
Vacuum Clamping and Small-Part Hold-Down
Make a small vacuum clamping board for routing/sanding. Mill a grid of shallow channels under a rubber sheet (or gasket the perimeter) and plumb a 2-1/2" port to the DWV9314 hose. Ideal for holding coasters, plaques, and trim while sanding or engraving without mechanical clamps.
Drywall Sanding Boom Arm
Install a ceiling-mounted swing arm (or wall boom) with a hose hanger to suspend the 2-1/2" DWV9314 hose overhead. Add a small universal shroud for a pole sander. This keeps the hose off the floor, follows you around a room, and captures dust effectively during drywall finishing.