Bosch 10 in 80-tooth non-ferrous metal-cutting circular saw blade

10 in 80-tooth non-ferrous metal-cutting circular saw blade

Features

  • Carbide-tipped teeth formulated for improved impact and wear resistance
  • Triple Chip Grind (TCG) tooth geometry for improved finish on abrasive materials
  • Zero to slightly negative hook angle to reduce binding in thin or delicate profiles
  • Expansion slots and a thick steel blade body to reduce warping and improve stability
  • Antifriction finish to reduce heat and dust buildup during cutting

Specifications

Arbor 5/8 in
Trade Name Edge Extreme
Pack Quantity 1
Blade Diameter 10 in
Tooth Geometry Triple Chip Grind (TCG)
Tooth Material Carbide-tipped
Number Of Teeth 80
Intended Materials Aluminum, brass, copper, other non-ferrous metals, PVC
Kerf (Width Of Cut) 0.127 in
Maximum Speed (Rpm) 6000
Blade Thickness (Body) 0.13 in

Circular saw blade designed for cutting non-ferrous metals and PVC. The blade uses a hard carbide tooth formulation and a Triple Chip Grind tooth geometry to provide wear resistance and a fine finish on abrasive non-ferrous materials. It has expansion slots and a thick steel body to reduce warping and improve stability during cutting. The hook angle is zero to slightly negative to help prevent binding in extrusions and tubing.

Model Number: PRO1080NFB

Project Ideas

Business

Cut-to-length extrusion service

Offer a local or mail-in service cutting aluminum, brass, and copper extrusions to precise lengths with clean, burr-minimized ends. Use stop blocks and this 80T blade to achieve repeatable tolerances for makers, contractors, and sign shops. Add deburring, light chamfering, and labeled packaging.


Custom aluminum frames and shadow boxes

Fabricate made-to-order picture frames and display cases from aluminum profiles with tight, clean miters. The blade’s negative hook reduces grabbing on delicate profiles, improving joint accuracy. Upsell powder-coated colors, UV acrylic glazing, and museum-grade mounting.


Mobile signage and trim fabrication

Provide on-site cutting of aluminum angles, channels, and PVC panels for storefront trims, sign backers, and mounting rails. A portable miter/table setup with this blade enables same-day fabrication and fitment. Charge premium rush fees and include edge finishing and hole drilling.


Copper and brass home accents line

Produce boutique hardware—towel bars, shelf brackets, handles, and curtain rod kits—using copper tube and brass flat bar. The TCG tooth form delivers a fine finish that needs minimal sanding. Sell online with custom sizing options and patina or polished finishes.


Window and door shop subcontracting

Partner with glaziers and installers to cut thresholds, sill nosings, mullion covers, and trims from aluminum extrusions. Offer quick-turn batches with consistent miters and lengths, bundled and labeled per opening. Provide on-site measurement and delivery to reduce installer downtime.

Creative

Tuned copper wind chimes

Cut copper tubing to precise lengths to create tuned chime sets. The 80T TCG teeth leave clean, square ends that hang and resonate evenly. The zero-to-negative hook angle helps prevent grabbing thin-walled tubes. Deburr, polish, then suspend with cord on a hardwood ring for a premium look.


Aluminum geometric wall art

Rip and crosscut aluminum flat bar or angle into repeating lengths and miters to assemble modular geometric panels. The stable blade body and expansion slots help keep cuts true for tight joints. Mount pieces on a painted backer with stand-offs for dimensional depth.


LED desk lamp with aluminum channel

Build a minimalist task lamp using aluminum U-channel for the light bar and PVC for a diffused lens. The blade’s TCG geometry yields crisp cuts on both aluminum and PVC, making tight-fitting housings. Add a gooseneck or hinged aluminum arm and route wiring through the channel.


Brass inlay coasters and trays

Cut thin brass strips and small medallions with burr-free edges, then inlay into routed grooves in wood coasters or trays. The consistent kerf lets you dial in snug fits. Finish with epoxy or CA glue and polish the metal flush for a luxurious mixed-material effect.


Modular PVC hydroponic tower

Create a vertical hydroponic garden by accurately cutting PVC pipe sections and clean openings for net cups. The fine finish reduces cleanup and improves sealing at joints. Combine with 3D-printed brackets or aluminum angle supports for a sturdy, compact system.