Features
- Non-woven abrasive material for extended life
- Quick-change (QDC) mounting for fast disc changes
- Suitable for metal surface finishing, surface preparation, and cleaning
- Compatible with mandrels and holder pads that match the arbor
Specifications
| Number Of Pieces | 25 |
| Pack Quantity | 25 |
| Diameter | 1 in |
| Grit | Coarse |
| Mounting Type | QDC (Quick Change Disc) |
| Compatibility | Use with mandrels and holder pads matching the arbor |
Related Tools
Related Articles
Non-woven surface finishing disc designed for metal finishing, general surface preparation, and cleaning. Uses a quick-change (QDC) mounting and is intended to be used with mandrels and holder pads that match the arbor.
Project Ideas
Business
Mobile Micro-Finishing Service
Offer on-site small-area metal cleanup and finish blending for fabricators, contractors, and property managers. Services include weld discoloration removal, rust/paint spot cleanup, and brushed finish touch-ups on railings, stairs, fixtures, and kitchen/brewery stainless. Quick-change discs minimize downtime between tasks.
Custom Brushed Metal Nameplates
Produce stainless/aluminum labels, signs, and desk plates with a uniform brushed background. Use the non-woven disc to prep and finish blanks before or after engraving/laser marking. Sell to offices, makers, breweries, and homeowners; offer fast turnaround and consistent grain direction across batches.
Vintage Tool Restoration and Resale
Source rusty hand tools, clean oxidation and grime with the coarse non-woven disc, preserve maker’s marks, and finish with a satin sheen. Bundle as ready-to-use or display pieces and sell on marketplaces. The 1 in disc gets into knurling, jaws, and tight transitions without harsh scratch patterns.
Moto/Auto Metal Detail Packages
Specialize in small metal parts: exhaust tips, foot pegs, levers, emblems, heat shields, and engine covers. Use non-woven discs to de-oxidize, remove baked-on grime, and leave a uniform satin finish that resists showing fingerprints. Upsell protective coatings and periodic maintenance plans.
Flange and Gasket Surface Prep Service
Serve HVAC, plumbing, and light industrial clients by removing old gasket material, corrosion, and sealant from small flanges and mating surfaces. The 1 in non-woven disc cleans without gouging, improving seal reliability. Package as on-demand callouts or preventive maintenance routes.
Creative
Brushed Metal Accent Tiles
Cut small stainless or aluminum squares and use the 1 in non-woven disc to create consistent circular swirls or a satin directional grain. The small diameter lets you make tight, repeatable patterns; quick-change mounting makes it fast to swap discs as they load up. Mount the tiles to a board or backsplash for an industrial art piece.
Upcycled Cutlery Jewelry
Turn vintage spoons and forks into pendants, cuffs, and keychains. Use the coarse non-woven disc to strip tarnish, soften sharp edges, and apply a uniform satin finish that hides scratches. The 1 in disc reaches tight curves around tines and handles; use a mandrel/holder pad that matches the arbor for control.
Knife Satin Finish and Forge Scale Cleanup
After profiling and heat treat, blend coarse grind lines and remove light scale on blades and fittings with the non-woven disc. It feathers plunge lines and choils without gouging, setting up a clean, consistent satin before finer hand-sanding or leaving it as a rugged finish on outdoor knives.
Industrial Pipe Lamp Prep
Build a pipe lamp from black iron fittings. Use the disc to remove mill scale, thread sealant residue, and rust bloom, then apply a brushed texture before clear coating. The small disc fits into tight spots around couplers and elbows and won’t round over stamped markings.
Found-Object Metal Sculpture
Assemble gears, washers, and scrap offcuts into a tabletop sculpture. Use the disc to clean weld zones, remove oxidation, and add varied textures (linear grain on flats, swirls on caps). The non-woven material blends without digging in, ideal for delicate, thin pieces.