14 in abrasive cutting wheel

Features

  • Compatible with portable high-speed saws
  • Type 1A (ISO 41) straight cutting wheel
  • 24 grit aluminum oxide abrasive
  • For cutting only — not for grinding
  • Intended for use at a 90° angle
  • Maximum 5,500 RPM
  • Available with 1 in arbor (alternative 20 mm bore option)

Specifications

Diameter 14 in
Thickness 5/32 in (0.15625 in)
Arbor Size 1 in (25.4 mm); alternate 20 mm bore option available
Grit 24
Abrasive Material Aluminum oxide (special grain)
Wheel Type Type 1A (ISO 41) straight cutting wheel
Maximum Rpm 5,500
Intended Use Metal cutting; use at 90° angle only
Weight 1.77 lb
Upc 000346327397
Pack Quantity 1 (case quantities available)
Safety Notice Contains materials covered by California Proposition 65; may expose users to chemicals that can cause cancer or reproductive harm

14-inch abrasive cutting wheel intended for metal cutting on portable high-speed saws. It is a Type 1A (ISO 41) straight cutting wheel with 24-grit aluminum oxide abrasive. Designed for cutting at a 90° angle only; not rated for grinding. Maximum safe speed is 5,500 RPM.

Model Number: CWPS1M1400

Project Ideas

Business

Mobile Cut-List Fulfillment

Offer on-site cutting for contractors: rebar, conduit, angle, and tube cut exactly to spec with a portable high-speed saw. Charge per cut plus setup, and upsell rush service and off-cut removal.


DIY Weld-It Frame Kits

Sell pre-cut, square, ready-to-weld kits for tables, shelving, gates, planter frames, and BBQ carts. Provide nested cut lists, hardware, and simple assembly drawings; ship flat-packed to makers and DIYers.


Scrap Size-Reduction Service

Partner with shops and demo crews to cut oversized scrap into yard-acceptable lengths for better payout and easier transport. Price by ton or by hour, with scheduled pickups and on-site cutting.


Fence and Gate Frame Production

Batch-produce straight-cut frames from square tube and flat bar for welders and fence installers. Offer standardized sizes and custom SKUs with local delivery to job sites.


Event and Retail Fixture Fabrication

Provide fast-turn metal frames for pop-up events, trade shows, and retail displays using modular straight-cut tubing components. Rent or sell reusable fixture kits and offer on-site adjustments.

Creative

Geometric Steel Wall Art Panels

Cut flat bar, angle, or strip steel into straight segments and assemble tessellated patterns or abstract line art on a rectangular frame. The 90° cuts keep everything crisp and repeatable; weld, rivet, or bolt pieces to create dimensional industrial décor.


Faceted Fire Pit

Produce a polygonal (e.g., 12-sided) fire pit by cutting repeating trapezoid and rectangle panels from steel plate and bar. The straight, square cuts make the fit-up clean; tack and weld into a faceted bowl with an elevated base and spark screen.


Modular Planter Boxes and Trellises

Cut angle iron and square tube to length for frames, then add sheet or slat infill. Build stackable planter modules with removable trellis panels for patios. Finish with paint or patina for a modern garden set.


Industrial Side Table Frame

Create a clean, square frame from cut square tubing and flat bar cross braces. Top it with reclaimed wood or stone. The accurate 90° cuts help the frame assemble true without complex jigs.


Tuned Steel Tube Wind Chimes

Cut EMT or stainless steel tubing into calculated lengths for different tones and suspend from a hardwood ring. Deburr, polish, and experiment with spacing and striker materials to fine-tune the sound.