Features
- 360° tool‑free swivel head for improved access and comfort
- Cuts a 7/32" strip that curls out of the cutting area for continuous cutting
- LED work light to illuminate the cutting surface
- Cordless design for use away from power outlets
- Variable‑speed trigger for control during cutting
- Includes hex wrench; blade is replaceable
Specifications
| Battery Type | Lithium Ion |
| Battery Voltage | 20 V |
| Power Source | Cordless (battery sold separately) |
| Cutting Capacity (Mild Steel) | 18 gauge |
| Cutting Capacity (Stainless Steel) | 20 gauge |
| Trigger Type | Variable speed |
| Led Light | Yes |
| Weight | 3.9 lb (≈2.1 kg) |
| Product Height | 6.5 in |
| Product Width | 3.062 in |
| Product Depth | 15.937 in |
| Typical Speed (Manufacturer Listing) | 220 rpm (reported) |
| Includes | Hex wrench; tool only — battery and charger not included |
| Warranty | 3 Year Limited Warranty; 1 Year Free Service; 90 Days Satisfaction Guaranteed |
Related Tools
Related Articles
Cordless swivel‑head shears designed to cut cold‑rolled mild steel up to 18 gauge (and thin stainless up to 20 gauge). Features a 360° tool‑free swivel head for accessing tight spaces, a LED work light for improved visibility, and a variable‑speed trigger. Tool is sold as a bare unit (battery and charger not included).
Project Ideas
Business
Mobile Flashing and Trim Fit Service
Offer on-site modification of steel roof flashing, wall panels, and trim where power is limited. The cordless shear’s 360° head reaches awkward overlaps and valleys, and the controlled cut leaves minimal distortion for clean installs. Bill per linear foot or per service call to roofers and general contractors.
Custom Metal Signage and Monograms
Produce personalized wall signs, house numbers, and monograms from 18 ga mild steel. Use paper templates and the LED light to track cut lines; start internal cutouts with a step bit. Finish with grinding, patina, and clear coat. Sell via Etsy and local markets, with upsells like powder-coat colors and standoff mounting hardware.
HVAC Duct and Register Modifications
Partner with HVAC firms to trim plenums, fabricate transitions, and resize return grilles on-site. The shear’s variable speed maintains control along beads and seams, while the 7/32 in waste curl keeps the cut line visible. Charge hourly or per piece; offer rush service during seasonal peaks.
Food Truck and Commercial Kitchen Fit-Outs
Trim 20 ga stainless wall panels, splash guards, kick plates, and equipment shields for kitchens and food trucks. The swivel head helps cut around conduit and fixtures without removing panels. Package services with measurement, cutting, deburring, and installation for turnkey projects.
Architectural Metal Decor Shop
Launch a small shop focused on metal home accents—vent covers, switch plates, planter boxes, and minimalist brackets—optimized for sheet steel. Standardize SKUs for efficient cutting with minimal waste ribbons. Sell online and wholesale to boutiques; offer custom sizing for builders and interior designers.
Creative
Geometric Metal Wall Art Panels
Design and cut interlocking geometric panels from 18 ga mild steel or 20 ga stainless. Use the 360° swivel head to follow curves and tight angles, and the variable-speed trigger to trace scribed lines. The 7/32 in kerf curl becomes a built-in design accent; plan negative space so the waste ribbon reads as part of the pattern. Finish with patina, paint, or clear coat and mount with standoffs for a floating effect.
Kinetic Garden Wind Spinners
Cut spirals, vanes, and counterbalanced shapes from stainless sheet for weather resistance. The cordless design lets you work outdoors, and the swivel head helps when cutting nested curves. Assemble with small bearings or grommets so elements rotate freely. Add color with heat-torch tempering or enamel, then stake in planters for movement and reflection in the wind.
Custom Lanterns and Lampshades
Create perforated lanterns by cutting panels with patterned cutouts that cast intricate shadows. Use the LED work light to see scribe lines and the variable-speed trigger for delicate filigree. Tack panels into a prism or cylinder around a warm LED bulb. For tabletop lamps, cut tabs and slots so pieces interlock cleanly before riveting or brazing.
Upcycled Steel Planters and Trellises
Turn flat sheet or thin drum steel into folded planters, window boxes, and matching trellises. Shear tapered sides and decorative top edges; the 360° head helps navigate inside corners. Bend on a brake or over forms, then hem edges for safety. Add drainage and mount tabs. Finish with outdoor paint and integrate trellis lattice cut from strip offcuts.
Decorative Vent Covers and Switch Plates
Cut custom grille patterns for HVAC returns, radiator screens, and switch plates. Start interior cutouts with drilled pilot holes, then nibble clean shapes with the shear, rotating the head to keep a comfortable approach angle. Bevel or hem edges for rigidity and safety, and powder-coat to match interiors.