HOMOTEK 2 Pack Privacy Pocket Door Lock Hardware with Pull - Replace Old Or Damaged Sliding Door Locks Quickly and Easily, 2-3/4”x2-1/2”, for 1-3/8” Thickness Door, Black

Why I picked up the HOMOTEK pocket door lock

I needed a straightforward way to modernize a pair of tired pocket doors without replacing the doors themselves. The HOMOTEK pocket door lock caught my eye because it promises a true drop-in replacement for 1-3/8" thick doors, comes as a two-pack, and offers finishes that match most modern hardware. I installed the black version on two bathroom pocket doors—one a simple swap, the other an older install that needed a little persuasion. Here’s how it went and how it performs.

Build, finish, and what’s in the box

Out of the box, the lock set feels better than the price suggests. The housing is mostly zinc with stainless components in the mechanism; the faceplates are nicely finished with an even, matte black that looks clean and resists fingerprints better than high-sheen finishes. Edges are deburred, the recessed pull is comfortable, and the thumbturn has a positive, deliberate feel.

Each pack includes:
- Two privacy lock bodies with integrated flush pulls
- Matching strike plates
- Screws and basic instructions

You can get it in Black, Brushed Satin Nickel, Oil Rubbed Bronze, Brass, and Antique Brass. I went with black to tie into matte black bath fixtures, and it’s a good match—no odd undertones and no visible casting flaws.

Fit and compatibility

This set is sized for 1-3/8" thick pocket or sliding doors, with faceplates measuring 2-3/4" x 2-1/2". If your door is 1-3/4", this isn’t the right option. For standard residential pocket doors, the mortise footprint is essentially “universal,” and in my case the HOMOTEK lock dropped into an existing cutout perfectly—screw holes lined up, strike location matched, and depth was spot on. If you’re starting from a blank door, you’ll need to create a rectangular mortise and a shallow recess for the faceplate and strike, so plan to chisel or use a small router.

A note on tolerances: Like most pocket door hook latches, this lock expects the door-to-jamb gap to be fairly tight. If your door bows or the pocket hardware leaves a generous reveal, the hook may not reliably catch the strike. That’s not a flaw unique to this set; it’s just the nature of hook-style pocket locks. The fix is simple: adjust or shim the strike so it sits slightly proud of the jamb, or tune the door travel.

Installation experience

If you’re replacing an existing pocket lock, expect a 10–20 minute job per door. My first door was a pure swap. I removed the old screws, slid out the tired mechanism, transferred the strike, and slipped in the HOMOTEK unit. Everything lined up, and the latch engaged without drama. A small tip: loosely assemble the interior plate and pull before setting the lock in the door. If you tighten those faceplate screws while it’s still off the door, the recessed pull can pinch a bit; tightening once it’s seated keeps everything square.

On the second door, I had to reverse the latch handing to match the door orientation. The lock is non-handed, but reversing the latch means flipping the hook orientation inside the mechanism. It’s doable with a small screwdriver and a bit of care, but it does require paying attention to how the spring and hook are seated. My technique:
1. Take a quick photo of the latch assembly before you start.
2. Remove the two screws holding the front plate, gently lift the hook and spring.
3. Flip the hook to the opposite orientation, re-seat the spring, and reinstall the plate.
4. Test the thumbturn action before installing in the door.

It took me a few minutes to get the spring tension right on the first try, but once set, the action was smooth and repeatable. The included instructions are pictorial and sparse; they’ll get you there, but if you’ve never worked with pocket hardware, watching a quick video on reversing hook latches will save time.

For a brand-new door, the work is “light carpentry”: trace the faceplate, drill and chisel the pocket, and recess the strike. If the idea of mortising in a finished jamb makes you uneasy, consider having a pro handle the cutouts. This is an excellent replacement kit; as a first-time install, it’s still approachable if you’re patient and careful with layout.

Day-to-day use

Once installed, the HOMOTEK lock feels solid. The thumbturn has a confident, short throw. The hook engages the strike with a distinct but not loud click, and there’s minimal play in the locked position. The recessed pull is wide enough to grip without pinching your fingers, and the edges are smooth so you don’t feel like you’re dragging along sheet metal every time you close the door.

Sliding friction is zero—you’re pulling on a fixed plate, not the door edge hardware—so you’re limited only by the quality of your pocket track. The finish has held up well against daily use in a bathroom environment; no flaking, no early wear.

This is a privacy lock, not a keyed lock. It’s perfect for bathrooms, bedrooms, or home offices where you want a latch and basic privacy but don’t need security. If you expect a public restroom style “emergency release” on the exterior side, check the specific variant you buy; mine did not include a coin-release feature.

What I appreciated

• Drop-in replacement: On standard 1-3/8" pockets, the body dimensions and screw spacing made the swap painless.
• Clean look: The black finish is consistent and modern. The faceplate sits flush and hides imperfections in older mortises reasonably well.
• Reversible design: Works on either door handing. Once reversed, operation is identical—no gritty feel or increased friction.
• Good value: The two-pack pricing makes sense if you’ve got more than one pocket door to update.

Where it could be better

• Instructions: The included guide is bare-bones. A clear diagram or QR to a quick video would cut the learning curve for latch reversal.
• Tolerance sensitivity: If your door-to-jamb gap is larger than ideal, you’ll need to adjust the strike. That’s par for the course with hook latches, but worth noting.
• Not for thicker doors: There’s no accommodation for 1-3/4" doors. If you’re working in older homes with nonstandard thickness, measure before you buy.

Tips for a smoother install

• Test-fit the lock in the mortise before committing screws. Make sure the hook lines up with the strike.
• Leave the faceplate screws slightly loose during placement; tighten once the unit is seated to avoid binding the recessed pull.
• If the latch doesn’t catch, shim or stack a strike plate to bring it closer to the door edge, or adjust the pocket door stops.
• Take a photo before reversing the latch so you can reassemble the spring correctly.
• Use a sharp chisel to clean up the strike recess; a flush strike improves engagement and looks cleaner.

Who this is for

• Homeowners replacing worn pocket door hardware on 1-3/8" doors who want a clean, modern look and a reliable privacy latch.
• Light residential renovations where a consistent finish across multiple doors matters.
• DIYers comfortable with minor carpentry; pros will appreciate the predictable fit.

If you need ADA-optimized pulls, keyed locks, or heavy-duty commercial-grade internals, you’ll want a different class of hardware. For typical residential use, the HOMOTEK set lands in a sweet spot between cost and quality.

The bottom line

The HOMOTEK pocket door lock does exactly what a good pocket lock should: it installs cleanly, looks sharp, and provides dependable privacy without calling attention to itself. The build is solid for residential use, the reversible design works as advertised, and the operation feels smooth and consistent. You’ll need to mind your door-to-jamb gap and be patient when reversing the latch, but those are manageable trade-offs.

Recommendation: I recommend this lock set for anyone replacing existing hardware on standard 1-3/8" pocket doors, especially if you’re updating multiple doors and want matching finishes. It’s a good-looking, reliable, and cost-effective upgrade. If you’re cutting new mortises and you’re not confident with chisels or routers, consider having a pro handle the prep—the rest of the install is straightforward, and the end result is worth it.