HPDMC 6-Pcs Garage Storage Cabinet System: Workshop Set with Steel Cabinet Drawers, Rolling Chest, Workbench, Pegboard for Tool Organization

Why I chose this setup

I wanted a single, cohesive solution to tame a messy one-car garage into a proper workspace without piecing together cabinets from multiple brands. The HPDMC garage system hits that brief: a tall locker, two wall cabinets tied together with overhead shelves, two rolling drawer units, a 52-inch workbench, and six metal pegboard panels. It arrives as a matched set with a consistent look and hardware, and once assembled it feels like a real shop, not a collection of odds and ends.

Unboxing and first impressions

Everything showed up on a single pallet, well cocooned and strapped. This is heavy-gauge, cold-rolled steel—doors close with that reassuring thunk, panels don’t oil-can, and the black finish is even and more scratch-resistant than I expected. The wood worktop is a standout: thick enough, nicely finished, and ready for immediate use without additional sealing. The roller cabinets’ drawer slides are smooth and confident, and the integrated locks on the locker and drawers are decent for casual security.

A note on reality: with freight that heavy and lots of flat steel surfaces, minor scuffs or a ding are possible. Inspect on delivery and photograph the packaging before you tear in. It’s a pain, but worth doing.

Assembly: manageable with a plan

I blocked out a half day and recruited a second set of hands. Two people is the right call—parts are bulky and alignment matters. Hardware and hole patterns are consistent and I didn’t have to elongate any holes or pull out a file. A few tips that made the build smoother:

• Stage everything and keep fasteners grouped by cabinet; a magnetic tray is your friend.
• Build on a flat surface and leave fasteners finger-tight until panels square up; then tighten in sequence.
• Use a temporary ledger/cleat screwed to the wall at your target height for the wall cabinets and pegboard. It supports the weight so you can level and bolt with less stress.
• Preplan where studs are; you’ll want solid anchoring for the uppers and pegboards.

I spent most of the time on layout: aligning the pegboard grid, ensuring the uppers and the overhead shelves lined up, and keeping the worktop square to the base units. From opening the pallet to hanging the last cabinet was about five hours at a steady pace with two people.

Build quality and ergonomics

The steel feels appropriately thick for the class, and the doors are braced to resist flex. The adjustable shelves inside the tall locker are the real deal—rated at 150 lb, and they didn’t complain when I loaded one with paint cans and a small compressor. The locker’s leveling feet helped me dial in plumb on a less-than-perfect slab, and once leveled and anchored it’s rock solid.

Drawer action on both rolling cabinets is smooth and consistent across the stack. Fully loaded with hand tools and fasteners, the 4-drawer unit still closes without racking. The 1-drawer unit offers a deeper bay for bulkier items; it’s great for power tool cases or a nailer/compressor setup.

The powder-coated finish cleans easily, though black does show dust and fingerprints more than lighter colors. Edges are rolled, but I still wore gloves during assembly; some internal flanges can be sharp.

The workbench and daily use

That 52-inch top is a sweet spot for a garage bay: wide enough to spread out a project, narrow enough to keep traffic moving. With the base units snug underneath, there’s no noticeable flex, and the front edge is comfortable against the forearms for long sessions. I mounted a small vise on one corner; the top took the bolts without crushing and the underlying structure kept everything from vibrating.

I appreciate the split personality of the two rolling cabinets. The 4-drawer keeps screwdrivers, wrenches, and pliers neatly sorted; the base remains stable even when the top drawers are opened. The other cabinet’s single, deeper drawer works for bulky kits. Both have locking casters; once parked, they behave like fixed base cabinets.

Pegboard reality check

HPDMC’s metal pegboard panels are sturdy and look great as a backsplash behind the workbench. However, the hole pattern and geometry differ from typical 1/4-inch hardboard pegboard. They use square holes, and the spacing doesn’t match the common 1-inch-on-center standard. In practice, that means:

• Many generic 1/4-inch “L” hooks will be loose or won’t seat properly.
• Hooks specifically designed for metal square-hole pegboard (or those with backer plates/retaining clips) fit far better.
• Heavier accessories—bins, shelves—work well if you use fasteners or locking styles that engage the metal panel securely.

Plan on sourcing square-hole-compatible hardware or locking pegboard hooks. If you’re deeply invested in a traditional pegboard ecosystem, consider swapping these panels for hardboard or a metal system with the spacing you prefer. The included panels are perfectly functional, but compatibility isn’t universal.

Installation demands forethought too. Six panels add up to a lot of wall fasteners. If you don’t want two dozen holes, mount a straight, continuous ledger (or a French cleat) to studs and screw the pegboards to that. It aligns everything and keeps fasteners in wood.

Safety and mobility

The tall locker is stable on its leveling feet, but I would not put it on aftermarket casters; tall casters raise the center of gravity and increase tip risk. Anchor the locker to the wall—two brackets into studs is enough—and you’ll get the best of both worlds: level and secure.

The rolling drawer units are meant to move, and the casters are up to the task on smooth concrete. Load them thoughtfully (heavier items in lower drawers), lock the wheels when parked, and they integrate nicely as “movable base cabinets” under the workbench.

Storage layout and flexibility

The overall layout makes sense: tall storage for long items in the locker; daily drivers in the drawers; small parts and consumables on the adjustable shelves in the uppers. The overhead shelves that bridge the two wall cabinets are a clever touch—they add rigidity to the upper run and create a continuous, reachable storage ledge for cases and bins.

Adjustability is solid across the system. Shelves move in sensible increments, and the locker’s interior can be tuned for tall totes or shorter, denser loads. If you like to reconfigure as your tool collection changes, this system supports that without forcing you back to the drill.

What I’d change

• Pegboard compatibility: The panels look sharp, but the hole pattern limits off-the-shelf hook options. Either include hooks matched to the pattern or adopt a standard spacing.
• Fewer wall penetrations: Pre-drilled rails or a cleat system out of the box would make mounting the pegboards and uppers faster with fewer holes.
• Documentation: The instructions are clear enough, but the wall-mounting section could better address stud spacing, ledgers, and alternate mounting strategies for different wall types.

Who it’s for

• Homeowners and DIYers who want a cohesive, heavy-duty garage workspace that feels like a system, not a collection.
• Makers who split time between mechanical work and general projects and need a real bench, real drawers, and lockable storage.
• Anyone starting from scratch on an empty wall and willing to do a careful install for a clean, integrated result.

If you’re already invested in a specific pegboard ecosystem, or you’re allergic to wall drilling, you’ll either need to adapt your approach or look for a system with standardized accessory compatibility and rail-based mounting.

The bottom line

After a full setup and a few weeks of daily use, the HPDMC system has given me exactly what I wanted: a sturdy, unified workspace with smart storage that doesn’t flex, wobble, or frustrate. The steel is substantial, the wood top encourages actual work, and the drawer units hold up to real loads. My two caveats are pegboard compatibility and the number of wall fasteners required for the backsplash and uppers—both solvable with a little planning.

Recommendation: I recommend this system for anyone seeking a solid, all-in-one garage setup that prioritizes durability and a cohesive layout. It’s a strong value in heavy steel cabinetry with a real work surface. Just budget time for a two-person install, plan your wall mounting carefully, and source square-hole-friendly pegboard accessories for the best experience. If those trade-offs fit your workflow, this is a dependable foundation for a home shop.