Features
- Designed for forming ogee and bead decorative edges
- Micrograin carbide tips ground for a fine finish and improved edge retention
- Hardened and tempered steel shank for durability
- Intended for edge forming on workpieces
Specifications
| Model Number | 84620M |
| Shank (In) | 1/2 |
| Diameter (In) | 7/8 |
| Radius (R1) (In) | |
| Pack Quantity | 1 |
| Order Number | 2608629293 |
Related Tools
Related Articles
Router bit designed to form ogee and bead decorative edges. It uses micrograin carbide cutting tips ground on CNC equipment for a fine finish and improved edge retention. The shank is hardened and tempered steel for increased durability.
Project Ideas
Business
Boutique Custom Frame Line
Launch a small-batch picture frame brand featuring your signature reverse ogee-and-bead profile. Sell standard sizes online and offer custom dimensions. Market the CNC-ground micrograin carbide crispness as a differentiator, and upsell premium hardwoods and museum glass. Batch production benefits from the durable, tempered steel shank and edge retention.
Premium Board and Serveware Shop
Produce cutting boards, charcuterie boards, and serving trays with your trademark edge. Create tiered collections (Classic, Luxury, Limited) using the same profile to maintain brand identity. Offer laser-engraved personalization. Sell through Etsy, local boutiques, and corporate gifting programs with wholesale pricing for bulk orders.
Historic Trim and Restoration Services
Offer a profile-matching service for old homes needing replacement edge details on sills, apron caps, and small moldings. Use the reverse ogee-bead to replicate period-correct edges where full custom knives aren’t cost-effective. Provide on-site measuring, shop fabrication, and installation as a turnkey package.
Cabinet Door and Panel Edge Profiling
Partner with local cabinetmakers to edge-profile door rails, stiles, and panel edges with the reverse ogee-bead for premium lines. Provide fast turnaround and consistent results using a router table and featherboards. Price per linear foot with volume discounts; the 1/2 inch shank bit’s stability supports production runs.
Workshops and Content Monetization
Host weekend classes teaching decorative edge profiling, safety, and finish techniques using this bit. Sell kits (pre-dimensioned boards plus finish) to students. Monetize step-by-step videos and plans demonstrating how to achieve clean profiles in different woods and how to combine the ogee-bead with other bits for layered effects.
Creative
Heirloom Picture Frames
Build solid-wood frames and run the Carbide-Tipped Reverse Curve Ogee and Bead Bit around the inner and outer edges for a double-profile reveal. The reverse ogee paired with a bead reads classic and refined, perfect for oil paintings or family portraits. Use contrasting woods (e.g., walnut exterior, maple liner) to accentuate the bead. The CNC-ground micrograin carbide leaves a crisp detail that needs minimal sanding.
Premium Charcuterie/Cutting Boards
Glue up end-grain or face-grain boards and route a reverse ogee with a small bead around the perimeter. Add finger reliefs by stopping short on two sides for ergonomic grips. The elegant edge instantly elevates simple boards into gift-worthy pieces. Offer sets with different wood species and matching coasters using the same profile for a cohesive look.
Decorative Mirror and Serving Trays
Make shallow trays and mirror frames where the rim is profiled with the ogee-and-bead for a classic furniture vibe. On trays, route the top rim; on mirrors, route both the inner and outer edges to create a stepped, shadow-line effect. The 1/2 inch shank helps keep chatter down on wider stock when using a router table.
Jewelry and Keepsake Boxes
Create small boxes and apply the reverse ogee-bead to lids and bases. A light pass on the lid’s lower edge and the base’s upper edge makes a refined, layered silhouette. Pair with velvet lining and brass hardware. The fine finish from micrograin carbide minimizes tear-out on figured woods like curly maple.
Floating Shelves and Mantel Edges
Route the front and side faces of floating shelves or a fireplace mantel for a furniture-grade edge. Combine the ogee-bead on the bottom edge with a simple round-over on top for a comfortable, hand-friendly profile. Stain or oil to highlight the crisp bead and shadow lines.