Features
- Compatible only with the corresponding sized DCE700 pipe threader die head
- Includes 4 high-speed steel replacement dies
- Cuts right-hand NPT standard threads
Specifications
| Is It A Set? | No |
| Number Of Pieces | 4 |
| Material | High-speed steel |
| Thread Type | NPT (right-hand) |
| Compatibility | Corresponding sized DCE700 pipe threader die head |
Related Tools
Related Articles
Replacement high-speed steel dies for pipe threading. Intended for use with the corresponding sized DCE700 pipe threader die head. Cuts right-hand threads to the NPT standard.
Project Ideas
Business
Mobile On-Site Thread Repair
Offer emergency and scheduled service to cut or chase 1-1/2 in. NPT threads on-site for facilities (irrigation, mechanical rooms, fire protection branches). With fresh high-speed steel replacement dies, you can rethread damaged pipe ends, shorten runs, and deliver tight, leak-ready joints without sending parts off-site.
Same-Day Custom Nipples and Extensions
Set up a small shop to cut-to-length and thread 1-1/2 in. pipe nipples and extensions. Market to plumbers, sprinkler contractors, and breweries for quick turnaround on odd lengths. Bundle with couplings, thread sealant, and QA gauges; offer delivery to local jobsites.
Industrial Decor Kits for Hospitality
Produce pre-threaded kits (host stands, bar foot rails, shelving supports, garment racks) using 1-1/2 in. pipe for restaurants, breweries, and retail. Each kit includes precisely threaded sections, tees, flanges, and assembly instructions. Sell online with configurable lengths and finishes.
Event and Film Rigging Rentals
Build a rental inventory of heavy-duty, threaded pipe stands, backdrops, and barricades. 1-1/2 in. NPT sections provide stability for lighting, signage, and crowd control. Offer on-site setup and custom-length threading using your DCE700 die head and replacement dies to adapt rigs to each venue.
Sustainable Pipe Reclaim and Resale
Source decommissioned 1-1/2 in. pipe, cut out damaged ends, and rethread to sell as eco-friendly components for builders and makers. Provide cleaned, inspected, and freshly threaded lengths with optional coating, turning waste into ready-to-use structural and decor stock.
Creative
Heavy-Duty Industrial Table Bases
Use 1-1/2 in. pipe to make stout, modular table or workbench bases. Cut and thread both ends with the DCE700 die head and these high-speed steel dies to create interchangeable legs and cross-bracing that screw into tees and flanges. The larger diameter yields a bold, restaurant-ready aesthetic and serious load capacity for butcher-block or slab tops.
Modular Garden/Greenhouse Frames
Build disassemblable greenhouse hoops, trellises, or espalier frames from 1-1/2 in. pipe. Thread custom lengths with right-hand NPT so you can swap sections seasonally, add crossbars for climbing plants, and break it down for storage. Use thread sealant or anti-seize depending on whether you want permanent or serviceable joints.
Strongman/Garage Gym Hardware
Fabricate farmer’s carry handles, a yoke frame, or squat stands using threaded 1-1/2 in. pipe. The large threads provide robust, reconfigurable joints. Cut precise shoulder widths and handle lengths with the die head and these replacement dies, then add end caps and plates for load pins.
Kinetic Pipe Sculpture
Create a kinetic, steampunk-style sculpture that relies on large threaded unions for adjustable articulation. Threaded 1-1/2 in. segments let you fine-tune angles and tension while keeping the industrial look. Use unions and tees as pivot points and re-thread offcuts into spacers and standoffs.
Outdoor Handrails and Guardrails
Make custom handrails for decks or steps from 1-1/2 in. pipe. Cut and thread posts and rails to exact heights and lengths with the DCE700 die head and these dies. Threaded assembly allows easy replacement of damaged sections and secure connections with standard pipe fittings.