Monlyey 3" 4" 5" 6" 8" 10" Floating House Numbers and Metal Letters for Outdoor Signs, Modern 304 Stainless Steel Silver Address Numbers for Home, Apartment, and Garden Decor

Why I chose these stainless numbers

I wanted to refresh my home’s curb appeal without committing to a full façade project, and address numbers are a deceptively high-impact upgrade. I went with the Monlyey stainless floating numbers in the 5‑inch size for a clean, modern look that wouldn’t rust or date quickly. After installing them on a cedar post near the driveway and testing a second set on a masonry surface, I came away impressed by the balance of design, durability, and straightforward installation—along with a few quirks to note.

Design and build quality

These are brushed 304 stainless steel numbers and letters with a modern, slightly mid-century vibe—crisp strokes, clear shapes, and a finish that looks upscale without being flashy. The brushing is consistent enough to read as a single set when multiple digits are installed side by side. The stainless has a reassuring heft; not a thin stamped piece, not a heavy cast slab either—solid and stiff enough that they don’t feel flimsy or prone to bending during installation.

The brushed finish is practical outdoors. It softens glare in direct sun and hides fingerprints better than polished metal. On my set, one number had the faintest hairline scuff out of the package. It wasn’t visible from a few feet away, and a quick pass with a nonwoven abrasive pad (think Scotch‑Brite) blended it in. Edges were generally clean, though if you run a finger along the perimeter you can feel a slight sharpness on a couple of corners. Nothing unsafe, just not hand‑polished.

If you live near saltwater, note that 304 stainless is very corrosion resistant but not immune to “tea staining” in aggressive coastal environments. Away from the ocean, 304 is a smart, durable choice. On the coast, rinse occasionally and consider a protective stainless cleaner if you want to be meticulous, or step up to 316 in other brands if you need maximum corrosion resistance.

Sizing and legibility

I picked 5 inches because my numbers sit about 25–30 feet from the curb. At that distance, the digits are readable while walking or driving slowly, and the floating effect adds enough shadow to boost definition in daylight. If your house is set back farther or on a faster street, consider 6–8 inches for better drive‑by legibility. For doors, gates, or interior signs, 3–4 inches looks tidy. Having the size range available is useful if you’re coordinating letters and numbers across a property.

Legibility is strong thanks to the clean design. The brushed silver contrasts best against darker backgrounds—stained wood, dark siding, brick, or painted panels. On light surfaces, you’ll want to ensure there’s good contrast, or add a backer plate for better visibility.

Installation: floating or flush

The kit includes the necessary screws and spacers so you can mount either flush or in a “floating” configuration where each character stands off the surface to cast a subtle shadow. I prefer the floating look—it gives depth without being gimmicky—and that’s how I set them on the cedar post.

A few practical notes from my install:

• Plan your layout first. I made a simple template using painter’s tape and a level: I taped a light cardboard strip to the surface, marked centerlines and spacing, and then used the numbers themselves to mark hole locations.
• Pre‑drill pilot holes. For wood, a small pilot prevents splitting and keeps screws straight. For masonry or stucco, you’ll need appropriately sized masonry bits and anchors. The included hardware is fine for wood and composite; for concrete, brick, or stucco, use your own anchors matched to your substrate.
• Use the spacers wisely. The spacers are small bushings that slip over the screws between the surface and the back of the number. They’re easy to manage if you start the screws into the surface first, then back them out just enough to slide on the number and spacer, and snug everything gradually. Don’t overtighten—snug is plenty, and it keeps the standoffs even.
• Mind alignment. Check level after every piece. Slight variances show more when the digits “float,” because shadows emphasize lines.

On the masonry test panel, I used plastic anchors rated for exterior use and a dab of exterior‑grade sealant in each hole before setting the screws. That prevents water intrusion and keeps everything tight as temperatures swing.

I appreciated that I didn’t have to hunt down extra specialty hardware. A paper drilling template would have made spacing even faster, but the DIY method worked fine. If you’re installing on a rough or uneven surface (like hand‑split stone), flush mounting may sit more securely; floating looks best on relatively flat planes.

Day-to-day durability

After weeks of late‑summer storms and a few bright, hot days, the numbers still look fresh—no discoloration, pitting, or loose hardware. Wiping them with a damp microfiber cloth removes pollen and dust easily. The brushed finish does a good job of hiding tiny marks that polished metal would amplify. I expect the stainless to hold up well over years, especially on wood or sealed masonry, with the occasional cleaning.

Night visibility depends on your lighting. Brushed stainless isn’t reflective like mirror chrome, and it won’t glow in the dark. If you want nighttime readability, add a small sconce or choose a darker backer panel so the numbers stand out in the light wash.

What stands out

• Clean modern look that pairs with many styles—from mid‑century to contemporary farmhouse—without clashing.
• Real 304 stainless steel and a brushed finish that feels appropriate outdoors.
• Included spacers create a subtle floating shadow line that elevates the presentation.
• Straightforward installation with all the basics in the box for wood or composite surfaces.

What could be better

• A printed drilling template would reduce layout time and stress for first‑time installers.
• Minor cosmetic nits (a faint scuff here or a slightly sharp edge there) won’t matter from typical viewing distances but are worth mentioning for perfectionists.
• For masonry, you’ll likely need to supply your own anchors matched to your substrate and hole size.
• The silver finish can get lost against pale siding; think about background contrast before you commit.

None of these are dealbreakers, but they’re the details I would want to know before starting the project.

Tips for a clean, professional result

• Test the layout at full scale. Blue tape and cardboard are your friends. Step back to the street to judge size and spacing.
• Choose contrast. On light siding, consider a painted backer board in a darker tone behind the numbers.
• Use quality anchors on masonry. Match your bit and anchor sizes, and add a dab of exterior sealant to each hole.
• Don’t overtighten. Stainless can dent or twist if you crank down hard. Snug and even pressure keeps the float consistent.
• Maintain lightly. Rinse or wipe down a few times a year; avoid harsh chlorine bleach cleaners on stainless.

Value and who it’s for

These numbers strike a sweet spot: materials that belong outdoors, a modern design that doesn’t try too hard, and an installation process most DIYers can tackle in an afternoon. They’re versatile, with sizes to suit front doors, fences, mailbox panels, and commercial entries. If you’re on a busy road or have a long setback, step up in size; otherwise, the 5‑inch height is a practical, good‑looking default.

Homeowners, property managers, and small businesses who want a durable, contemporary address display will be happy here. If you need reflective or illuminated numbers for emergency visibility, or if you’re right on the oceanfront and want zero maintenance, you may want to explore alternative materials or lighting.

Recommendation

I recommend these Monlyey stainless floating numbers. They deliver a clean, modern look, the 304 stainless build inspires confidence outdoors, and the included spacers make a surprisingly big visual difference with minimal effort. Installation is straightforward with basic tools, and the result reads as custom without the custom price or complexity. Be prepared to sort your own anchors for masonry and spend a few extra minutes on layout, but once mounted, they do exactly what good address numbers should: stay legible, look sharp, and quietly upgrade your curb appeal.